3186 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The light inside the oven had burned out
3 of 7 people
found this instruction helpful.
-
Catherine from SEATTLE, WA
- Very Easy
- Less than 15 mins
0. As a safety precaution, unplug the range or hit the relevant fuse breaker before you start. You might also want to grab a flashlight. Definitely do not try to do this while the oven is hot.
1. Pinch the wire over the light bulb cap to remove it. This is inside the oven at the back.
2. Pop off the hemispherical glass cap.
... Read more />3. Unscrew the old light bulb, and screw the new light bulb in its place.
4. Put the cap back.
5. Secure the cap by putting the wire back in its slots on the cap.
No tools needed, the cap is just held in place with pressure from the wire.
1. Pinch the wire over the light bulb cap to remove it. This is inside the oven at the back.
2. Pop off the hemispherical glass cap.
... Read more />3. Unscrew the old light bulb, and screw the new light bulb in its place.
4. Put the cap back.
5. Secure the cap by putting the wire back in its slots on the cap.
No tools needed, the cap is just held in place with pressure from the wire.
Read less
Was this helpful?
Thank you for voting!
Fridge light dead even with new bulb
1 person
found this instruction helpful.
-
marj from NEWBURY PARK, CA
- Really Easy
- 15 - 30 mins
-
Screw drivers
1- youtubed the potential diagnoses, 2- resourced and ordered parts, 3- removed old socket, installed new one :-)... My fridge is an older fridge and could've used a screwdriver for eyeglasses. Plug and play easy... YAY!
Was this helpful?
Thank you for voting!
had moved into new house and discovered freezer door gasket incompletely sealing tried using home warranty service but decided trying rather than 100$ service fee. ordered gasket and watched several u-tube videos.
1 person
found this instruction helpful.
-
philip from FARGO, ND
- Really Easy
- 15 - 30 mins
Placed new gasket into dryer,( recommended by 2 u tubes) high heat for about 10 minutes and was a snap getting softened gasket into little tiny slot actual placement was done twice as there was a twist in the seal i missed the first time so did do twice but was so easy this way was almost sad thinking it would have been 100$ deductible ha
... Read more
ving someone do it and who knows what normal cost would have been......thanks u tube
Read less
Was this helpful?
Thank you for voting!
water build up in bottom of refrigerator
1 person
found this instruction helpful.
-
Joy from BELMONT, NH
- Very Easy
- 15 - 30 mins
Allow 24 hours for new gasket to flatten out from packaging. Gently peel off existing gasket. Clean dirt and mold from mount area.
Mount gasket beginning at a corner. Press gasket into place every inch around perimeter. Done! Water is no longer in bottom of refrigerator and it is running more efficiently (less time running) due ... Read more to the fact that it can maintain the temperature for longer periods of time.
Mount gasket beginning at a corner. Press gasket into place every inch around perimeter. Done! Water is no longer in bottom of refrigerator and it is running more efficiently (less time running) due ... Read more to the fact that it can maintain the temperature for longer periods of time.
Read less
Was this helpful?
Thank you for voting!
Old gasket did not seal
2 of 4 people
found this instruction helpful.
-
Mary from Hortense, GA
- Really Easy
- Less than 15 mins
Took old gasket off put new on.
Gasket came well packaged so only ran hot water over it briefly and put it on.
Gasket came well packaged so only ran hot water over it briefly and put it on.
Was this helpful?
Thank you for voting!
needed to replace broken drawer slide rail,
1 person
found this instruction helpful.
-
janette from huntingtown, MD
- Really Easy
- Less than 15 mins
-
Screw drivers
removed produce drawers, removed center piece front cover, removed glass shelf, removed broken drawer slide rail - unscrewing where attached in the rear of the refrigerator. Also removed screw from centerpiece where broken drawer slide rail was attached. reassembled all very quickly....saved myself having to buy another refrigerator by d
... Read more
oing this simple repair.
Read less
Was this helpful?
Thank you for voting!
Light would stay on when door closed
3 of 7 people
found this instruction helpful.
-
James from Glendale Heights, IL
- Really Easy
- Less than 15 mins
-
Nutdriver, Pliers
Extremely easy repair, the hardest part was getting the old switch out. I used a pair of needle nose pliers to squeeze the tabs in and it came right out.
Was this helpful?
Thank you for voting!
light switch freezer door
3 of 7 people
found this instruction helpful.
-
Sumlorq from Cleveland, OH
- Really Easy
- Less than 15 mins
put the gratefruit knife behind the old switch pooped it out pluged the new one in piece of cake 5min.even vacumed the dust off the coil
Was this helpful?
Thank you for voting!
sweating / leaking water
2 of 4 people
found this instruction helpful.
-
John from Bryan, TX
- Really Easy
- Less than 15 mins
it was so easy I need to put an ad online to replace gaskets got the right part on time get fit
Was this helpful?
Thank you for voting!
My wife forced the fruit drawer in and snapped the slide rail.
1 person
found this instruction helpful.
-
Mark from Keyport, NJ
- Really Easy
- Less than 15 mins
-
Screw drivers
I pulled out the shelf and removed the 2 screws holding the broken side rail to the shelf frame. I then screwed the new rail in and set the shelf back in.
Was this helpful?
Thank you for voting!
original parts broken (poor design)
1 person
found this instruction helpful.
-
WALTER from SPRING HILL, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
Unscrewed four screws, two on each part, and replaced broken parts, reinserting screws. This is a no-brainer repair.
Was this helpful?
Thank you for voting!
broken slide rails
1 person
found this instruction helpful.
-
Craig from Bothell, WA
- Really Easy
- Less than 15 mins
-
Screw drivers
Basically I removed 4 screws holding the rails together, did a little cleaning of the existing parts that I would re-use and screwed the 4 screws back in and put it back into the fridge. Piece of cake. If I hadn't cleaned up the old parts it would have taken me 5 minutes.
Was this helpful?
Thank you for voting!
family member melted fan with hair dryer
1 person
found this instruction helpful.
-
Lauraine from Rocky Hill, CT
- Really Easy
- Less than 15 mins
-
Screw drivers
Unplugged fridge.Removed 2 screws holding a panel. After panel removed took off old fan and inserted new. Quite simple.
Was this helpful?
Thank you for voting!
bulb out
1 person
found this instruction helpful.
-
Kenneth from Rowe, VA
- Really Easy
- Less than 15 mins
I ordered the part, within two days we had received it. My husband put the part in and I really don't know what he used doing so. All I know is that the light works now and we don't have to use the flashlight. Thanks a lot.
Was this helpful?
Thank you for voting!
Drawer Slide Rails broken
1 of 2 people
found this instruction helpful.
-
David from Wingate, NC
- Really Easy
- Less than 15 mins
-
Screw drivers
The bottom shelf of my Mom's fridge broke. I found the part I needed and went to repair it. Realized both sides were broken. Ordered other side as well. Two screws in front, two screws in back. Front side had a metal strip covering screws. Had to pull that off to get to screws. Snapped back on after repair.
Mother was very ple ... Read more ased.
Told her to be careful. Those little pieces of plastic can be expensive.
Mother was very ple ... Read more ased.
Told her to be careful. Those little pieces of plastic can be expensive.
Read less
Was this helpful?
Thank you for voting!