EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3186 - Instructions

All Instructions for the 3186
121 - 135 of 197

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
the side rail broke because I kicked it
0 of 1 people found this instruction helpful.
  • Peter from Prospect, CT
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I took out all the stuff on the shelf, and the drawers.
then I took out the shelf, pulled off the cover so I could get at the screws.
I unscrewed 2 screws, threw out the old part, and screwed the new one into the shelf.
then I put the whole thing back together, in total the hardest part was cleaning off the shelves and then putting everything back in.
As a note, there was a gasket on the old rail that was not on this one. I had some silicone tabs that I used instead, but I really think the gasket should have been part of the order.
Was this helpful?
Thank you for voting!
Seal was worn and torn and in need of repair...
0 of 1 people found this instruction helpful.
  • Janice from Sammamish, WA
  • Really Easy
  • Less than 15 mins
Wasn't sure what I would find underneath the old gasket, so I went slowly at first, but once the first side was off, the rest of the gasket came off quickly....and the metal track under it was clean and in good condition. After cleaning the areas where the gasket would seal, my daughter and I each started at a corner and placed the gaske t into the track. Entire thing done in less than 10 mins. Piece of cake...only issue was a crease in the outer cushion area....I couldn't seem to smooth it with the warm water bath....it may uncrinkle with time...right now it is leaving a very small space when the door shuts. Saved me the expense of a new unit right now...hoping this takes care of the cooling issue I have with the unit keeping fresh veggies fresh.
Was this helpful?
Thank you for voting!
The slide rail for the vegetable drawer broke in a refrigerator that is at least 15 years old.
0 of 1 people found this instruction helpful.
  • ade from oceanside, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed the broken rail (2 screws), replaced the new rail (2 screws), reassembled all in about 8 minutes. It was AWESOME!!! I had spent hours trying to repair it and, fortunately, gave up and decided to look online for the part. Didn't even think that the part would still be available. Not only was it available but it arrived in 2 days ! Anything that is broken in the future: I am going to your website first! Thank you!!!
Was this helpful?
Thank you for voting!
broken vegie bin slide rails
0 of 1 people found this instruction helpful.
  • Jacki from Iola, KS
  • Really Easy
  • Less than 15 mins
  • Screw drivers
This was very easy. Just unscrew the broken side pieces and attach the new ones. If the rubber gaskets are still in good shape, gently pull them off and attach them to the new rails. I was very impressed with the service from Partselect.com. I gave them my appliance model number and they helped me find the right part. I ordered on Su nday evening and had the parts in hand by Tuesday. Great service! I will definitely use this company if I need more parts.
Was this helpful?
Thank you for voting!
Moisture Build Up Inside Refridgerator
0 of 1 people found this instruction helpful.
  • Reginald from Bowie, MD
  • Really Easy
  • Less than 15 mins
I removed the gasket starting in one of the corners, until the gasket was completely removed.
I then replaced the gasket with a new one by starting in one of the corners and pressing it on to the track around the door.
Was this helpful?
Thank you for voting!
Broken door shelf retainer
0 of 1 people found this instruction helpful.
  • Bill from Prescott, AZ
  • Really Easy
  • Less than 15 mins
Just replace end cap and install. The beauty of this was the door was broken in the evening before July 4 when all retail had closed down early for the 4th weekend. I hit Part Select on the computer, scrolled down the partslist,looked at pictures and figured out from that the necessary piece I needed, hit the buy button and in less than 1 0 minutes had an order placed. July 7 UPS was at the door with the parts and my reefer was back in business. NO service call and no extra charges!!! Thank You, PartSelect!!!!
Was this helpful?
Thank you for voting!
This part broke for whatever reason, I do not know.
0 of 1 people found this instruction helpful.
  • John D from Chevy Chase, MD
  • Really Easy
  • Less than 15 mins
  • Pliers
I needed a pliers to extract the shelf reatainer from its place in the door of the fridge.

I found the part in the partSelect catalog, ordered it, opened the box, and snapped the replacement part into place. I then popped the Shelf retainer back into place where it belonged.

Piece of cake.
Was this helpful?
Thank you for voting!
Light socket missing in refrigerator
1 of 4 people found this instruction helpful.
  • Wayne from Issaquah, WA
  • Really Easy
  • Less than 15 mins
Frig parts had been scavenged in an apartment complex. Restoring socket was only a matter of plugging in two spade contacts and clipping in socket.
Was this helpful?
Thank you for voting!
door shelf cap was broken and shelf fell off the door
0 of 1 people found this instruction helpful.
  • Lynn from Montvale, NJ
  • Really Easy
  • Less than 15 mins
  • Pliers
Removed the broken part with a pliers.
Inserted end cap into shelf, then into door.
PERFECT!!!
Thank you
Was this helpful?
Thank you for voting!
Door gasket torn & needed replacement
0 of 1 people found this instruction helpful.
  • Ray from Hamilton, MT
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Wrench set
I took all of the creases out of the new gasket with hot water as described on the delivery box. I laid the gasket on the floor and let it cool while I took the refrigerator door off, laid it on a table, and removed the old gasket. I started the new gasket into the groove at one corner and pressed it into place by sliding my thumb along the gasket and seating it as I went. It was an extremely simple task which took about 2 minutes. The most time is consumed in removing and replacing the door
Was this helpful?
Thank you for voting!
The support for the vegetable drawer cracked
0 of 1 people found this instruction helpful.
  • Linda from Davis, CA
  • Really Easy
  • 15 - 30 mins
The repair was very simple. The longest part was taking everything off the shelf in the refrigerator so that the slide rail could be removed. Then when things were out, it was clear that the bottom of the refrigerator needed cleaning. The repair itself was done quickly. The cleaning (yuck) took longer! this is a great site because th e part came quickly and it was very easy to select just what was needed.
Was this helpful?
Thank you for voting!
The Slide Rail was broken
0 of 1 people found this instruction helpful.
  • Max from Corvallis, OR
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
First i removed the vegetable drawers and slide rails. Removed two screws from the old rail then replaced it with the new one. Then replaced the vegetable drawers. It was that simple. The replaceement part was delivered to my home in threre days after i ordered it on line. It was better than going to a dealer and having them order one for me then having to make another trip to pick it up.
Was this helpful?
Thank you for voting!
drawer slide broken
0 of 1 people found this instruction helpful.
  • Linda from Bloomingdale, GA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Remove bottom glass shelf, lift up -then remove entire drawer slide assembly.Remove plastic decorative front cover(it just snaps off) and unscrew left side drawer slide screws.replace with new part and screw in screws. Replace in bottom of fridge and replace glass shelf.So Easy that an average house wife like myself was able to do it alon e.Almost as easy as finding the part needed on partselect.com! Thanks, it was much easier than apple pie.
Was this helpful?
Thank you for voting!
slider cracked, so drawers wouldn't stay in
0 of 1 people found this instruction helpful.
  • shelli from gaithersburg, MD
  • Easy
  • 15 - 30 mins
  • Screw drivers
The entire frame that holds the two crisper drawers pulls right out. After that, it's just a matter of unscrewing the broken part, snapping in and screwing the new part and sliding the whole thing back in.
Was this helpful?
Thank you for voting!
Bad switch for door prevented interior light from coming on
0 of 1 people found this instruction helpful.
  • Patricia from Sylva, NC
  • A Bit Difficult
  • 15 - 30 mins
  • Pliers, Screw drivers
Just as your video described, although due to the age of the fridge, it took a bit longer to remove the defective switch. Your video made this so simple, I can't imagine why we lived with a dark fridge for so long! I was ready to buy a whole new fridge, as repairmen are often nonexistent for small repairs. I am the biggest fan of yo ur company & it's repair video. THANK YOU SO MUCH
Was this helpful?
Thank you for voting!
All Instructions for the 3186
121 - 135 of 197