31-397 Tappan Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Old switch killed by a short between wires
9 of 12 people
found this instruction helpful.
-
Darren from San Diego, CA
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers
Turn off the electricity
Remove knob
Unscrew old switch
Lift stovetop & prop
Remove wires from switch
Remove switch
Plug wires onto new switch
Put new switch in place
Shut stovetop
Screw new switch in place
Trim knob post
Put adapter on post
Put knob back on
Turn electricity ... Read more back on
Cook dinner :)
Remove knob
Unscrew old switch
Lift stovetop & prop
Remove wires from switch
Remove switch
Plug wires onto new switch
Put new switch in place
Shut stovetop
Screw new switch in place
Trim knob post
Put adapter on post
Put knob back on
Turn electricity ... Read more back on
Cook dinner :)
Read less
Was this helpful?
Thank you for voting!
Large burner wouldn't heat
15 of 31 people
found this instruction helpful.
-
Phyllis from Elberon, IA
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
Removed back off of stove. Removed two screws that held in the switch, removed the wires that were connected to the switch and replaced the part.
Was this helpful?
Thank you for voting!
terminal block kit needed for two burners
7 of 7 people
found this instruction helpful.
-
Geraldine from MT HOOD PRKDL, OR
- Very Easy
- 15 - 30 mins
-
Screw drivers
It was either fix the terminal blocks or buy a new stove. Our appliance man told us how we could do this ourselves and sent us a link. In the meantime I'd found yours, which was quite a bit cheaper and it too, came with a How To Video. Very easy!! All the parts fit and work beautifully and all for under a hundred dollars! We replaced two
... Read more
terminal block, one element and all 4 drip bowls! Nice friendly service!
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
My element had a hole in it
8 of 10 people
found this instruction helpful.
-
Kathy from Gentry, AR
- Really Easy
- 30 - 60 mins
-
Pliers, Screw drivers
Removed old elements I stalled new ones
Other Parts Used:
Was this helpful?
Thank you for voting!
Oven would not heat, broiler still worked.
7 of 8 people
found this instruction helpful.
-
Eric from Lafayette, IN
- Really Easy
- Less than 15 mins
-
Nutdriver
I unplugged the stove for precautionary reasons.
I then removed the two screws holding element in place with the correct nutdriver.
I then carefully pulled out the element and pulled the two female spade connectors off.
I then compared to new element and plugged the new element in.
Finally I screwed in the new elem ... Read more ent and tested the oven.
It worked again!! I would recommend running the oven for a bit before placing anything in to bake. this allows burn off of stuff on the new element.
I then removed the two screws holding element in place with the correct nutdriver.
I then carefully pulled out the element and pulled the two female spade connectors off.
I then compared to new element and plugged the new element in.
Finally I screwed in the new elem ... Read more ent and tested the oven.
It worked again!! I would recommend running the oven for a bit before placing anything in to bake. this allows burn off of stuff on the new element.
Read less
Was this helpful?
Thank you for voting!
Oven light bulb went dark; it needed replacing
10 of 17 people
found this instruction helpful.
-
Lise from CEDAR GROVE, NJ
- Very Easy
- Less than 15 mins
Twisted replacement bulb into place easily. Let there be light!
Was this helpful?
Thank you for voting!
Oven heat element broke in 1/2.
8 of 11 people
found this instruction helpful.
-
Keith from LAKEVILLE, OH
- Very Easy
- Less than 15 mins
-
Screw drivers
Took screws out back of oven to get to connectors . Pulled old conectors off Installed new element took about 5 min. Very easy job. Also good time to clean oven .
Was this helpful?
Thank you for voting!
error sensor on display when oven was used
8 of 11 people
found this instruction helpful.
-
James from Clarence, NY
- Really Easy
- 15 - 30 mins
-
Screw drivers
I looked up the error code on line and found it was likely a faulty oven temp sensor. I was able to find the part and diagram at partselect.com and placed an order. The probe was in stock and arrived within a couple days. The repair took only about 20 minutes and works fine now. Thanks for your help partselect.com!
Jim
Jim
Was this helpful?
Thank you for voting!
Needed new drip bowls.
7 of 9 people
found this instruction helpful.
-
Robert from Oradell, NJ
- Really Easy
- Less than 15 mins
Pulled out heating elements. Removed old drip bowls. Inserted new drip bowls and re-installed heating elements.
I was extremely pleased with the very quick delivery of needed parts.
I was extremely pleased with the very quick delivery of needed parts.
Other Parts Used:
Was this helpful?
Thank you for voting!
Broken Drawer Glide
6 of 6 people
found this instruction helpful.
-
Sharon from Hamlin, NY
- Really Easy
- Less than 15 mins
It snapped right into the drawer, was very easy
Was this helpful?
Thank you for voting!
Oven racks rusted
11 of 21 people
found this instruction helpful.
-
Wendell from Ocala, FL
- Really Easy
- Less than 15 mins
Ordered new racks and replaced them.
Was this helpful?
Thank you for voting!
The latch for locking the oven during the self-cleaning cycle was broke and would not lock
6 of 6 people
found this instruction helpful.
-
carlton from crescent city, FL
- Really Easy
- 15 - 30 mins
-
Screw drivers
I first lifted the top of the stove up where the burners are then removed 7 philips head screws plus the 2 screws that hold the latch in place, which is just above the oven door. I pulled the old latch off the rod that goes to the lock motor.I hen put the new latch in and replced all the screws. Turned the self-cleaning cycle on and it w
... Read more
orked perfectly.Thanks to the help of repair guy at Parts Select and the pictures made the repair simple and fast. Thank You Patrs Select
Read less
Was this helpful?
Thank you for voting!
switch not always turn off
7 of 9 people
found this instruction helpful.
-
Jerrold from San Marcos, TX
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Took upper back off ( 6 screws), chech to be sure was right switch, pulled spade clip wires of, put on new switch, checked to see that it worked, replace cover.
Was this helpful?
Thank you for voting!
the bottom oven element shorted and melted
6 of 6 people
found this instruction helpful.
-
angela from lake placid, NY
- Easy
- 15 - 30 mins
-
Screw drivers
pulled oven out, unplugged, unscrewed element attachment to the back of the oven (from the inside). element did not work. we tested the upper element and that did not work either. the burst of sparks, heat and flame from the shorting of the original element caused damage to the computer board. we called a local repair man to change the
... Read more
computer board, and then the unit worked, with our new element that we replaced!
Read less
Was this helpful?
Thank you for voting!
broken lens over oven light
11 of 22 people
found this instruction helpful.
-
Leslie from Warsaw, VA
- Really Easy
- Less than 15 mins
Your service was OUTSTANDING...Ordered one afternoon, and before lunch time the next day, the delivery man rang my door bell...Thanks a bunch for you excellent service.....
Was this helpful?
Thank you for voting!