Inglis Range Switches
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Inglis Range Switches
Your Price
$95.44
In Stock
Inglis Range Surface Burner Element Switch, Large Burner
PartSelect Number PS11740783
Manufacturer Part Number WP3149400
This surface burner element switch is for an 8-inch surface burner on an oven, stove, or range. The element switch controls the heat of the surface burner. Disconnect power to your range before completing this repair because you will be working closely with electrical circuits. Remove the screws from back panel and the console, and remove the console to expose the switch. It is recommended to check for overheating or arcing on the wiring harness in case they need to be replaced as well. The harness that connects to the switch features a slip-on terminal for easy installation.
Fixes these symptoms
- Element will not heat
- Oven is too hot
- Oven not heating evenly
- See more...
Installation Instructions
chaz from fairplay, CO
the element did not turn compleatly off, the on light stayed on.
removed the screws holding the back metal panel, this exposed the wires to the switch. tested the wires to find that they were live when the switch was in the off position. ordered a new switch. UNPLUGED THE STOVE. removed the knob on the front of the stove. this exposed 2 screws, removed screws and the switch came away from the stove. removed each wire from the old switch and replaced them in the same position on the new switch. inserted new switch into the stove and attached the 2 screws. replaced back panel and pluged in stove. all tested well
Read more...
Your Price
$108.63
In Stock
Inglis Range Dual Element Control Switch
PartSelect Number PS11754687
Manufacturer Part Number WPW10434452
This switch controls the stove top surface burner.
Fixes these symptoms
- Element will not heat
- Oven is too hot
- See more...
Installation Instructions
Dale from POUND, WI
Switch worked off and on but you could not set heat to a specified temperature.
Remove back panel 10 screws. Disconnect plug in fixture from switch. Front of range remove knob (it just pulls out) remove 2 screws, remove switch. To install reverse procedure.
Read more...
Your Price
$58.00
In Stock
Inglis Range Infinite Control Switch, 6"
PartSelect Number PS11740785
Manufacturer Part Number WP3149404
This switch controls the stove top 6" surface burner.
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
Bruce from Pasadena, MD
The old switch broke off.
Removed two screws that held the unit in then pulled out a few inches so I could see where the 5 wires were. Then I replaced one at a time till done. then replaced the retaining screws.
Read more...
Your Price
$66.84
In Stock
Inglis Range Infinite Switch - 8 Inch
It was fairly easy to take the "Control Deck" off the top of the range by removing about 8 screws. I leaned the deck forward without removing any wires except a green ground that was held on by one of the screws.
There are two small screws under the switch knob holding the Infinite Switch to the panel. I removed these and let the switch hang on the wires. To avoid missplacing or crossing the wires... I moved one wire at a time to the new switch, then attached the switch to the panel and put it all back together.
Whole job was done in about 15 minutes Read more...
PartSelect Number PS11740775
Manufacturer Part Number WP3148953
This switch controls the stovetop surface burner.
This surface element control switch is for ranges.
Surface element control switch turns the surface element on and off and controls how much heat the element produces.
Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
RON from KAUFMAN, TX
The burner would keep heating after turning off the switch
Start by turning off the power to the range. It was fairly easy to take the "Control Deck" off the top of the range by removing about 8 screws. I leaned the deck forward without removing any wires except a green ground that was held on by one of the screws.
There are two small screws under the switch knob holding the Infinite Switch to the panel. I removed these and let the switch hang on the wires. To avoid missplacing or crossing the wires... I moved one wire at a time to the new switch, then attached the switch to the panel and put it all back together.
Whole job was done in about 15 minutes Read more...
Your Price
$93.72
In Stock
Inglis Range Infinite Switch - 6 Inch
2. Removed several screws that held the control block
3. Removed two screws that held the switch itself disconnected wires and removed switch
4. Reconnected all wires to new switch (no soldiering gun required)
5. Put control block back
Overall - very easy Read more...
PartSelect Number PS11740774
Manufacturer Part Number WP3148952
This part carries 5.2-6.6 amps.
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
Mikhail from Iowa City, IA
One of the heat elements in my oven would not heat
1. Disconnected power from my oven.2. Removed several screws that held the control block
3. Removed two screws that held the switch itself disconnected wires and removed switch
4. Reconnected all wires to new switch (no soldiering gun required)
5. Put control block back
Overall - very easy Read more...
Your Price
$102.66
In Stock
Inglis Range Dual Infinite Switch
PartSelect Number PS11747156
Manufacturer Part Number WP9755173
This switch allows you to choose which size burner you require according to the size of the pots and pans you're using.
Fixes these symptoms
- Element will not heat
- See more...
Your Price
$110.94
In Stock
Inglis Range Switch, Infinite (Left Front)
Then I repaced the part.
Worked like a charm Read more...
PartSelect Number PS11747308
Manufacturer Part Number WP9761048
This switch controls the stove top surface burner.
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
Joshua from Orlando, FL
The control swithc for a burner blew
I ordered the part, which only took a very short time.Then I repaced the part.
Worked like a charm Read more...
Your Price
$136.62
In Stock
Inglis Range Infinite Dual Switch
PartSelect Number PS11749068
Manufacturer Part Number WPW10149355
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
Anthony from VIRGINIA BCH, VA
Dual infinity switch inoperable
Repair was very easy and fast. Followed video and had zero issues.
Read more...
Your Price
$93.05
On Order
Inglis Range Surface Element Infinite Switch Kit
PartSelect Number PS972604
Manufacturer Part Number 8203538
This switch controls the stove top surface burner.
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
Steven from Eau Claire, WI
Broken bunner control and knob.
1. Slide out stove & unplug. 2. Remove stove top light top plate (a snap fit - do with care - a little awkward). 3. Remove bulb. 4. Remove two silver head Phillips screws that were under bulb. 5. Control panel swings face down towards stove top. 6. Pull off switch knob (spring pressure clip holds knob on switch shaft) and remove two silver head Phillips screws to release the old switch. 7. Follow instruction sheet that comes with the infinite switch to transfer wire connections to new switch. 8. Reassemble everything in reverse order. 9. Clean up before pushing stove back in.
Read more...
Your Price
$88.87
In Stock
Inglis Range Oven Selector Switch
PartSelect Number PS11740883
Manufacturer Part Number WP3188987
This part allows you to select the bake or broil function for your oven.
Installation Instructions
Richard from Mariposa, CA
Broken Switch
Made sure was off, Removed rear panel, removed 2 screws, removed wire clips from old switch, installed wires on new switch, installed switch with 2 screws, re-installed back panel, reconnected power and checked switch function. OK!
Read more...
