Inglis Dryer Switches

Find your part

Enter your model number or a part number and click "Search"
Need help finding your model number?
Inglis Appliance Parts
Shop By Part Type

Popular Inglis Dryer Switches

Your Price
$31.87
  In Stock
Dryer Door Switch
★★★★★
★★★★★
429 Reviews
PartSelect Number PS11741701
Manufacturer Part Number WP3406107
This dryer door switch is a simple on/off switch mechanism that prohibits the dryer from operating when the door is open, and operates the drum light. White in color and 6.5 inches long, this OEM switch is comprised of plastic and metal, and features the switch and three wires that comprise the part. Sold individually, this part attaches to the inside of the top end of the front panel. One end attaches to the wiring harness, the other goes through the panel to make contact with the door when the door is closed. Over time, this part can be subject to material fatigue or breakage due to frequent use or rough handling. If it breaks or is defective, you won't be able to start or stop your drying cycle, depending on the position your switch broke in. The easiest way to test this part for functionality is to test it by hand. Push on the black tab that sticks out of the front panel to make contact with your dryer door; if there is no resistance in the tab and it doesn't make a click sound, you may need to replace it.
Fixes these symptoms
  • Door won’t close
  • No heat or not enough heat
  • Shuts off too soon
  • See more...
Installation Instructions
pat from lisbon,, OH
door switch was bad
i was able to go on line with your company , find my dryer, order the part and had it the next day. fast , great , service Read more...
Your Price
$35.15
  In Stock
Push-To-Start Switch
★★★★★
★★★★★
17 Reviews
PartSelect Number PS11742178
Manufacturer Part Number WP3977456
This push-to-start switch activates the dryer when the button is pressed and released. If your switch is not turning on or off, will not start, or the contacts inside the switch are shorted out, it is best to replace this part as a possible solution. Remember to unplug your appliance before beginning the installation process, as safety precaution. For installation instructions and accurate guidance, refer to the diagram provided by the manufacturer.
Fixes these symptoms
Installation Instructions
Dennis from Port Orchard, WA
Broke start switch while moving
Turned off the power.Pulled the dryer out, removed the screws from the control cover panel, unplugged the switch, pressed the release clip the did the opposite to install new switch. Replaced the back panel, put the nob on and it looks as good as new.Turned on the power. Read more...
Your Price
$32.88
  In Stock
Door Switch Assembly
★★★★★
★★★★★
38 Reviews
PartSelect Number PS11741700
Manufacturer Part Number WP3406105
A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.
Fixes these symptoms
Installation Instructions
John from Bethesda, MD
Dryer would stay on after opening the Door. The switch that turns off the dryer when you open the door was not broken.
You open up the lint filter access door and remove the two small screws that hold it to the top of the dryer. Once they are removed, you insert a flat blade screwdriver under front-top of the unit and the top will pop off. Exerting a little pressure towards you will help lift to top off the mounts. There are no other screws to remove.
The new switch comes attached to a clip. You just pull off the old clip and replace it with the new one and discard the old switch. Read more...
Your Price
$50.38
  In Stock
Door Switch
★★★★★
★★★★★
9 Reviews
PartSelect Number PS11750824
Manufacturer Part Number WPW10237959
Fixes these symptoms
Installation Instructions
Ronald from LANCASTER, CA
A piece of cloting snagged and broke the door switch.
Repair job took less than 10 minutes: 1) Unplug Dryer 2) Remove Lint screen and 2 Phillip screws 3) use flat putty knife to depress lid latches while lifting (latches located approx 2 - 3 inches from each side. 4) unplug defective door switch 5) remove 2 Phillip screws that secure the door switch. Reinstall switch repeating the above steps in reverse order and your done. Read more...
Your Price
$44.87
  In Stock
Door Switch
★★★★★
★★★★★
8 Reviews
PartSelect Number PS11756443
Manufacturer Part Number WPW10569603
Fixes these symptoms
Installation Instructions
Colleen from CAPE CORAL, FL
Dryer continued to run with door open
The video provided by this site on YouTube on this topic was perfect. Saved us a couple of hundred dollars DIY rather than repair man. Read more...
Your Price
$68.97
  In Stock
Push-to-Start Switch
★★★★★
★★★★★
11 Reviews
PartSelect Number PS11741493
Manufacturer Part Number WP3398095
This part is used to start the dryer once you have selected a setting on the timer.
Fixes these symptoms
Installation Instructions
Vincent from Pipersville, PA
defective switch
unplug dryer
pull off switch knob
remove two screws at corners of control unit
pull unit toward you to remove
flip over and remove panel
unscrew switch then twist switch to remove from face on control unit
holding new switch next to old, remove wires from old switch and insert onto new switch
place new switch on control unit face and twist into position
Install screws
replace panel, flip back over
position control unit and slide back to lock in place
screw in corners
replace switch knob
plug in dryer
test switch Read more...
Your Price
$30.23
  In Stock
SWITCH-PTS
★★★★★
★★★★★
2 Reviews
PartSelect Number PS11754549
Manufacturer Part Number WPW10420741
Fixes these symptoms
Installation Instructions
Diane from HGHTN LK HTS, MI
Thought it wad the start switch $23.00
Paid an extra over night fee Friday $24.00 didn't get it until Tuesday afternoon all in all it cost $51.00 then that wasn't the problem. Read more...
Your Price
$55.13
  In Stock
Start Switch
★★★★★
★★★★★
3 Reviews
PartSelect Number PS11754857
Manufacturer Part Number WPW10446920
Fixes these symptoms
Installation Instructions
Thomas from LOWELL, MI
Replace start switch
Take back off top of dryer and replace switch Read more...
Your Price
$59.45
  In Stock
Push-to-Start Switch
★★★★★
★★★★★
8 Reviews
PartSelect Number PS11741680
Manufacturer Part Number WP3404233
This part is used to start the dryer once you have selected a setting on the timer.
Fixes these symptoms
Your Price
$68.04
  On Order
Push-to-Start Switch
★★★★★
★★★★★
3 Reviews
PartSelect Number PS11741477
Manufacturer Part Number WP3395385
This is a 4-terminal switch.
Fixes these symptoms
Installation Instructions
Greg from Sykesville, MD
Kenmore 70 series dryer wouldn't stop running
The start switch on my Kenmore dryer was bad, causing the dryer to go into another timed cycle once it completed one cycle, and it would keep going until we unplugged it or left the door open. I repaired the switch at first, but after a couple of months the contacts bent again, so I just decided to replace it.

The new switch from PartSelect.com was only $8 or so plus shipping. Once I got the switch, I removed the rear access panel, disconnected the bad switch, and replaced it with the new switch. I closed the dryer up and it worked beautifully.

You can find detailed instructions on replacing the push-to-start switch on a Kenmore 70 series dryer on Fixya.com: Read more...

Related Parts

Back to Top