EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

Gibson Refrigerator Hardware

Popular Gibson Refrigerator Hardware

To secure a refrigerator or freezer door handle to the door, this OEM kit includes four #10-16 screws. Each is 0.500 in. long and has a Phillips or square drive. Confirm compatibility with your appliance before buying.
To secure a refrigerator or freezer door handle to the door, this OEM kit includes four #10-16 screws. Each is 0.500 in. long and has a Phillips or square drive. Confirm compatibility with your appliance before buying.
Installation Instructions
Roy F from Oakdale, CA
Broken Handle on Main Door
Unscrewed the old screws and removed broken piece of handle. Put new screws in for handle to latch in. Swung handle in place and put the 2 special screws in top of handle. Job done. With the correct parts from Parts Select The replacement was a breeze. Thanks for your speedy delivery and support. I will definitely continue to get all my various appliance parts from you

Respectfully

Roy
A refrigerator or freezer door handle is held in place by this screw. The OEM part has a #10-16 thread, a 1/2-inch length, and a Phillips/Square drive. Confirm it matches your appliance before ordering.
A refrigerator or freezer door handle is held in place by this screw. The OEM part has a #10-16 thread, a 1/2-inch length, and a Phillips/Square drive. Confirm it matches your appliance before ordering.
Installation Instructions
Roy F from Oakdale, CA
Broken Handle on Main Door
Unscrewed the old screws and removed broken piece of handle. Put new screws in for handle to latch in. Swung handle in place and put the 2 special screws in top of handle. Job done. With the correct parts from Parts Select The replacement was a breeze. Thanks for your speedy delivery and support. I will definitely continue to get all my various appliance parts from you

Respectfully

Roy
This gasket retainer clip kit is for freezers. There are 24 pieces in this kit. The clips are what secure the gasket and liner to the freezer lid. The clips are white in color and made of plastic. If you notice frost build up in your freezer or that is it is not maintaining its temperature, this might be because the retainer clips have broken, and this has caused the gasket to become loose. This is a genuine OEM part that is obtained right from the manufacturer, ensuring a quality repair.
This gasket retainer clip kit is for freezers. There are 24 pieces in this kit. The clips are what secure the gasket and liner to the freezer lid. The clips are white in color and made of plastic. If you notice frost build up in your freezer or that is it is not maintaining its temperature, this might be because the retainer clips have broken, and this has caused the gasket to become loose. This is a genuine OEM part that is obtained right from the manufacturer, ensuring a quality repair.
What this part fixes:
  • Frost buildup
Installation Instructions
Michael from Milan, TN
Old panel lid broken and brittle
Removed lid and placed upside down on floor. Pulled plastic retainer clips and removed gasket. Removed old panel. Repositioned new panel and reversed assembly.

Ordered only one spare plastic clip. Too expensive to invest in more. Luckly only broke one of the old clips.

Carefully pulled clips with small claw hammer.
$7.47
In Stock
Sold individually.
Sold individually.
This nylon door hinge washer supports the refrigerator door as it pivots on the hinge pin and helps reduce friction between adjoining parts. A worn, damaged, or missing washer may affect door alignment or contribute to squeaking and uneven movement. Inspect the washer and surrounding hinge components if the door sags, rubs, or no longer closes smoothly, since other faults can cause similar symptoms. Match the washer to its position in the appliance parts diagram and follow the door support instructions before removing hinge hardware. This is an OEM part sourced directly from the manufacturer.
This nylon door hinge washer supports the refrigerator door as it pivots on the hinge pin and helps reduce friction between adjoining parts. A worn, damaged, or missing washer may affect door alignment or contribute to squeaking and uneven movement. Inspect the washer and surrounding hinge components if the door sags, rubs, or no longer closes smoothly, since other faults can cause similar symptoms. Match the washer to its position in the appliance parts diagram and follow the door support instructions before removing hinge hardware. This is an OEM part sourced directly from the manufacturer.
What this part fixes:
  • Door Sweating
  • Door won’t open or close
Installation Instructions
Patrick from Hollis, ME
refrig. door fell off lower hinge
took door off to see damage / what caused it . put door back on with temporary fix. /
looked up parts online / ordered parts online.
received parts very quickly. removed doors again, put on repair parts , tested - ok now.
Original Equipment Manufacturer

MAKE THIS REPAIR A GUARANTEED WIN

OVER 2 MILLION PARTS TO ENSURE VICTORY

Cross Recessed Pan Head Screw Size: 10-16 X 0.500
Cross Recessed Pan Head Screw Size: 10-16 X 0.500
Installation Instructions
Roy F from Oakdale, CA
Broken Handle on Main Door
Unscrewed the old screws and removed broken piece of handle. Put new screws in for handle to latch in. Swung handle in place and put the 2 special screws in top of handle. Job done. With the correct parts from Parts Select The replacement was a breeze. Thanks for your speedy delivery and support. I will definitely continue to get all my various appliance parts from you

Respectfully

Roy
$25.25
In Stock
Sold individually.
Sold individually.
This screw is sold individually.
This screw is sold individually.
Installation Instructions
Pamela from Severna Park, MD
broken deli drawer and gasket distended and out of place at corner
My husband and I were online pricing new refrigerators ($1100 and up plus an otherwise okay frig to add to the landfill). I had a moment of clarity and tried a parts search and found this site. I decided we were NOT going to replace it, we would fix it.

I pulled out the entire shelf and unscrewed the rail. I manuevered in the new rail and screwed it down. I returned the shelf and now I no longer have the deli drawer drop out of the tracks.

To replace the gasket, the worse part was having to empty the contents of the door and removed all of the 30+ screws that hold it in place. I positioned the gasket over the edge of the door inset, pressed it back up against the door with the gasket in place, lined up the screw holes and started turning the screwdriver. I screwed in the top 2 corners first so they would hold the door inset in place from that point.

The instructions stated that silicon sealant should be applied between the gasket and the door, particularly at the corners, and I did this, particularly since the corner pulling out was why I was replacing the gasket in the first place.

However after I returned all the screws to the proper place and turn the refrigerator back on, I noticed condensation around the seal. I realized after a few days that I had silicon on the gasket itself and this was causing an imperfect seal. I cleaned all the little wisps of silicon off the gasket and the frig has been fine ever since.
$25.25
In Stock
Sold individually.
Sold individually.
$19.68
In Stock
Sold Individually.
Sold Individually.
Installation Instructions
Terrence from WESLACO, TX
missing door handle
installed new handle