Craftsman Engine Bearings

Your Price

$14.76

Craftsman Engine Snow Blower Greased Bearing

PartSelect Number PS9270711

Manufacturer Part Number 2108202SM

This Ball Bearing is an individually sold, silver/black, metal part. It reduces friction in the spindle assembly between the spindle shaft and the spindle housing. If broken due to wear/fatigue, you will hear a grinding, growling, rumbling or screeching sound, and should replace the part. Refer to your make, model and diagrams to ensure this is the right part for you.

Your Price

$6.40

Craftsman Engine Lawn Mower Flange Bearing

PartSelect Number PS9122043

Manufacturer Part Number 741-0660A

This OEM-manufactured flange bearing supports and enables the smooth rotation of parts in your lawn equipment, such as the blade assembly, axle assembly, or steering components. This bearing has an inner diameter of .76 inches, an outer diameter of .941 inches, and a width of 1 inch. It is made of plastic. A similar similar style flange bearing can be used at the bottom of the crank, but it would be made of metal. When the bearing is broken, you may notice signs of wear and abnormal squealing noises coming from your machine. If neglected, the parts the bearing is supporting can overheat and potentially seize up. To switch out a flange bearing, you need to take off any bolts, screws, or clips that are holding it in place. Using a hammer or a bearing puller tool, gently push the bearing out of its housing. Since this part is sold individually, remember to refer to your user manual to understand how many bearings your machine will need. It is strongly recommended that you replace all the bearings in one go, as they wear out at the same rate.

Your Price

$8.66

Craftsman Engine Bearing:flange

PartSelect Number PS9112939

Manufacturer Part Number 741-0516B

This is a genuine replacement part produced by original manufacturer. It is used in various tractors from MTD, Yard Machines, Bolens, and Yard Man. Flange bearings facilitate spinning axles/shafts and reduce friction. They are a very high wear item that may require replacement often. Sold individually.

Your Price

$32.57

Craftsman Engine Ball Bearing

PartSelect Number PS9167899

Manufacturer Part Number 941-0600

This is a genuine OEM sourced replacement part that is intended to be used with lawnmowers, snowthrowers, and tillers from Bolens, Ryobi, Yard Machines, MTD, Troy-Bilt, and Yard-Man. The sealed bearing is used to limit friction between a rotating shaft and a fixed part assembly. It is recommended to review your models illustrated part diagram to confirm the bearing\\\'s compatibility. This item is sold as an individual replacement part.

Your Price

$7.25

Craftsman Engine Bushing-0.765idx

PartSelect Number PS8921376

Manufacturer Part Number 2176440SM

This is a genuine replacement part for tractors made by Snapper, Murray, and Simplicity. The bushing fits between the washer and the mounting steering plate. It is made out of plastic and will need to be replaced if it becomes broken. A screwdriver, a set of pliers, and a wrench set may all be needed to help replace this part. This item is sold individually.

Your Price

$10.77

Craftsman Engine Bearing-cup

PartSelect Number PS9169358

Manufacturer Part Number 941-04299

This is a genuine Troy-Bilt replacement part sourced directly from the manufacturer. The cup bearing is commonly found in Troy-Bilt tillers. This part is made of metal, and is used with the cone bearing to join the drive shaft with the transmission housing. You may require pliers when replacing this part. It is advisable when removing multiple parts to keep careful track of their order so they can be reassembled correctly. This item is sold individually.

Your Price

$11.29

Craftsman Engine Bushing, 3/8 X 9/16 5/8, Rub

PartSelect Number PS8874177

Manufacturer Part Number 1654930SM

This genuine manufacturer-sourced item is specially made for use with Murray, Snapper and Simplicity lawn and garden equipment. It is a special hardware that helps to provide a tight fit between connected parts. This is an identical replacement for a missing or a damaged component that was installed on a new unit. Make sure to refer to the appropriate diagrams for your model to ensure the proper repair procedure. A wrench set might be needed to replace this part. One durable bushing is included.

Your Price

$10.05

Craftsman Engine Bearing-flange

PartSelect Number PS9311574

Manufacturer Part Number 941-0225

The Hex Flange bearing, .630 inches I.D. is an OEM part. Black in color and made of metal, it is sold individually. It is installed using a wrench or socket and its installation has been rated as Easy by consumers. This part attaches on the worm gear shaft in the cute, and is used to secure the worm gear on the shaft. If broken, you will no longer to be able to control the chute (or you may only have partial control). This breakage can occur due to fatigue over time, and means the part must be replaced. Refer to your owners manual or model number to ensure you are purchasing the correct part.