Craftsman Engine Seals and Gaskets

Your Price

$10.83

PartSelect Number PS17016670

Manufacturer Part Number 951-11589A

This high-quality fuel bowl O-ring is a genuine replacement part supplied by the original equipment manufacturer for use with lawn and garden equipment. It is designed to create an airtight seal for the fuel bowl, helping to prevent leaks and maintain proper engine performance. Over time, the O-ring may shrink, crack, or degrade, requiring replacement to ensure continued reliability. Made from durable rubber, this part is sold individually and includes one O-ring per order.

Your Price

$8.09

Craftsman Engine Oil Seal

★★★★★

1 Review

PartSelect Number PS9277860

Manufacturer Part Number 391086S

The Oil Seal is a manufacturer-approved rubber part which provides a seal between the crankcase and crankshaft by attaching around the axle shaft on the crankhouse housing. Installation is rated as "Medium" difficulty and requires a screw driver, wrench set and seal puller. A broken seal will cause a leak, and the part must be replaced. Refer to your make, model and diagram to ensure you're choosing the right part. This part comes in black and gray.

Your Price

$8.66

Craftsman Engine Carburetor Gasket

PartSelect Number PS9171925

Manufacturer Part Number 951-11571

This is an authentic replacement part manufactured for use with outdoor power equipment. The carburetor gasket is used to form a seal between the carburetor and the air intake box. It is recommended to replace gaskets when servicing the carburetor to ensure good seals when the parts are reassembled. This gasket is sold as an individual replacement part.

Your Price

$8.76

Craftsman Engine Carburetor Gasket

PartSelect Number PS18474465

Manufacturer Part Number 751P12005B

This carburetor gasket is an authentic OEM sourced item that is specially designed to provide an air tight seal between the carburetor and the insulator plate. It is commonly utilized on small engines installed on lawn and garden equipment. Over time gaskets tend to get compressed and crack eventually requiring replacement. To replace this carburetor gasket you will need a set of screwdrivers.

Your Price

$9.09

Craftsman Engine Fuel Bowl Gasket

PartSelect Number PS17605340

Manufacturer Part Number 951-11348A

An authentic item that is supplied directly from the original equipment manufacturer for use with lawn and garden equipment. This replacement gasket is generally utilized to provide an air-tight seal for the fuel bowl, over time the material may begin to wear out and crack eventually requiring a replacement. It is a high-quality component which is made of durable rubber and is sold individually.

Your Price

$6.40

Craftsman Engine Carburetor Gasket Plate

PartSelect Number PS17016727

Manufacturer Part Number 751P11897B

This genuine carburetor gasket plate is an original replacement part sourced directly from the manufacturer for use in snowblowers by MTD, Yard Machines, Troy-Bilt, Yard Man, and Cub Cadet. Positioned between the carburetor and the choke control bracket, this component is essential for creating a secure, airtight seal that ensures proper engine performance. Made from a thin, durable material, the gasket plate may require replacement if it becomes damaged or worn. This item is sold individually and may require a socket set and pliers for installation. For best results, consult your equipment’s service manual and perform the repair with the engine off and cool.

Installation Instructions

Jason from PEABODY, MA

Carburetor rebuild

I can’t complete this easy repair because partselect sent the wrong part and has not responded to customer service requests. Please contact me- jtandree@gmail.com Read more...

Your Price

$6.40

Craftsman Engine Gasket-intake

PartSelect Number PS9063862

Manufacturer Part Number 692555

This is an authentic replacement part manufactured for use with Briggs and Stratton small engines. The special intake gasket seals the connection between the breather tube and carburetor. It is recommended to replace the gasket when servicing the carburetor, or air cleaner to assure a good seal when reinstalling the parts. The intake gasket is sold individually.

Your Price

$6.40

Craftsman Engine Seal-o Ring

★★★★★

1 Review

PartSelect Number PS9294749

Manufacturer Part Number 691917

The Seal-O Ring, also known as the gasket, is red in color, made of rubber, and is an OEM part that requires some skill to replace. This part is designed to create a seal between the carburator and manifold, to prevent air from entering. If your engine loses power, creates a hissing noise, or if the gasket appears damaged or your engine running improperly it may be time to replace the part. If you run the engine and spray the outside of the carburator with soapy water, you can test whether or not the gasket is leaking by listening to the sounds produced. If the sound smooths out then you've found your leaky gasket. Damage may occur over time, especially if the part dries out, and make the part appear stretched or worn out. When making this medium-difficulty repair, make sure the new gasket is fitted properly between the carburetor and intake manifold.

Installation Instructions

FRANK from EASTANOLLEE, GA

Screw can out of the carburator throttle baffel and stuck in the exhaust valve

No compression. Removed the cylinder head. freed the screw, checked the valve to see if it still sealed. Turned the head over with the valves in it, install a spark plug, fill the head dome with gas and see if any leeks out over a 2 hr period. If not you are good to go. Reinstalled every thing with new gaskets and a new carburetor screw. Set the valves to spec. Complete the rebuild and there you have it. Rebuild the carburetor while you have it apart. This motor runs great !!! Read more...

Your Price

$5.28

Craftsman Engine Gasket

PartSelect Number PS8938792

Manufacturer Part Number 26756

This item is available as an individual replacement part. The gasket attaches to the intake pipe and is made out of a thin material. During replacement, it may require a screwdriver to help install this part correctly. It will require replacing if it breaks. This genuine item is supplied by the original equipment manufacturer for use with lawn mowers, lawn tractors, and snowblowers made by Tecumseh, Toro, and Lawn Boy.

Your Price

$6.40

Craftsman Engine Gasket-intake

PartSelect Number PS8941262

Manufacturer Part Number 273113S

This is the intake gasket designed for various models of small engine equipment, including blower vacuums. The intake gasket plays a crucial role in internal combustion engines, creating an airtight seal between the cylinder head and the intake manifold. This seal prevents the leakage of air, coolant, or fuel. Our intake gasket is an official OEM (Original Equipment Manufacturer) part, crafted from high-quality composite material. If you notice issues such as engine misfiring, overheating, coolant or oil leaks, or overall poor performance, it is essential to inspect and replace your intake gasket promptly. Regular maintenance of your engine and equipment can help prevent damage to other components and reduce the frequency of repairs. To replace this gasket, begin by disconnecting the spark plug and opening the air intake cover to access the air filter. Use a wrench to remove the air filter housing, exposing the internal components. Replace the old intake gasket, reassemble the housing, and put your engine back together. Turn on your equipment and monitor its performance to ensure it runs smoothly.

Shop by Department

Top Appliance Brands

Top Lawn Equipment Brands

Popular Craftsman Engine Seals and Gaskets

Related Craftsman Engine Parts

Shop by Department

Top Appliance Brands

Top Lawn Equipment Brands

Sample Model Number Tags

EasyApplianceParts is Now PartSelect!

Craftsman Engine Seals and Gaskets

Find Your Part

Popular Craftsman Engine Seals and Gaskets

Related Craftsman Engine Parts