My Orders
Craftsman Engine Engines
GET YOUR OFFICIAL Craftsman PARTS TO ENSURE VICTORY
Shop By Part Type
View MorePopular Craftsman Engine Engines
This is a genuine Toro replacement part. The camshaft is designed by the manufacturer for use in lawn tractors and engines. This part is made of metal, and is placed in the crankcase assembly to interact with the crankshaft. It comes with two metal tappet valves. You may require a wrench when replacing this item. This part is sold individually.
This is a genuine Toro replacement part. The camshaft is designed by the manufacturer for use in lawn tractors and engines. This part is made of metal, and is placed in the crankcase assembly to interact with the crankshaft. It comes with two metal tappet valves. You may require a wrench when replacing this item. This part is sold individually.
This is an Genuine OEM replacement part used on a variety of Lawn and Garden Engines. This part is made out of Metal and it is sold individually. The Push Rod rides on the camshaft to push the exhaust valve open during the exhaust stroke. A bent pushrod can not only affect your engine's performance, it can seriously damage other parts if the problem is not taken care of immediately.
This is an Genuine OEM replacement part used on a variety of Lawn and Garden Engines. This part is made out of Metal and it is sold individually. The Push Rod rides on the camshaft to push the exhaust valve open during the exhaust stroke. A bent pushrod can not only affect your engine's performance, it can seriously damage other parts if the problem is not taken care of immediately.
This spark plug boot is a genuine OEM Briggs & Stratton replacement designed to fit securely over the spark plug, protecting the connection from moisture, dirt, and debris. Its durable, elbow-style design helps ensure reliable ignition and easy installation, making it an ideal replacement when a cracked, loose, or worn boot causes hard starting, misfires, or inconsistent engine performance.
This spark plug boot is a genuine OEM Briggs & Stratton replacement designed to fit securely over the spark plug, protecting the connection from moisture, dirt, and debris. Its durable, elbow-style design helps ensure reliable ignition and easy installation, making it an ideal replacement when a cracked, loose, or worn boot causes hard starting, misfires, or inconsistent engine performance.
This is a genuine manufacturer-approved replacement part which is specially designed for use on Briggs and Stratton engines commonly installed on lawn and garden equipment. The push rod rides on the camshaft to push the exhaust valve open during the exhaust stroke. A bent rod can not only affect your engine's performance, it can seriously damage other parts if the problem is not taken care of immediately. Keep in mind this high-quality part is made of durable metal and is sold individually.
This is a genuine manufacturer-approved replacement part which is specially designed for use on Briggs and Stratton engines commonly installed on lawn and garden equipment. The push rod rides on the camshaft to push the exhaust valve open during the exhaust stroke. A bent rod can not only affect your engine's performance, it can seriously damage other parts if the problem is not taken care of immediately. Keep in mind this high-quality part is made of durable metal and is sold individually.
Installation Instructions
rodney from MUSCATINE, IA
governor not working
Had to pull the engine off the rider mower. Drained the oil took shield off the flywheel. Set it upside down on a 5 gal bucket. Took a 7/16 hand wrench to remove governor lever from bottom of engine. Left it in its location. Pulled 10 1/2 " bolts. Split engine case. Found the old governor had broke into pieces. Had to use a magnet t
... Read more
o remove all the pieces. Removed the small clip and removed gear. Lubed shaft slid new on put new clip on. Lined governor weights with center piece tapped it in place very lightly. Cleaned gasket flanges pulled the shaft seal. Used the old seal as a seal driver. When putting the cover back on make sure the seal dont roll out. Take a mini screwdriver and tuck it in around shaft. Put bolts back in and tighten like instructions
Read less
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This rocker arm adjuster, or valve lash adjuster, is a genuine OEM replacement part used in lawn tractors. It is approximately one inch long and made of steel. It is responsible for adjusting the clearance between the rocker arm and valve stem, which allows the valves to open and close as needed. The adjuster will need to be replaced if the threads are stripped, or if it is cracked, or worn down. Remove the spark plug wire to prevent accidental starting and remove the valve cover from the engine to access the rocker arm. Detach the rocker arm and unthread the faulty adjuster. Screw the new adjuster into the rocker arm and use a feeler gauge to set the correct intake clearance. Reinstall the arm into the engine and return the valve cover to complete the repair.
This rocker arm adjuster, or valve lash adjuster, is a genuine OEM replacement part used in lawn tractors. It is approximately one inch long and made of steel. It is responsible for adjusting the clearance between the rocker arm and valve stem, which allows the valves to open and close as needed. The adjuster will need to be replaced if the threads are stripped, or if it is cracked, or worn down. Remove the spark plug wire to prevent accidental starting and remove the valve cover from the engine to access the rocker arm. Detach the rocker arm and unthread the faulty adjuster. Screw the new adjuster into the rocker arm and use a feeler gauge to set the correct intake clearance. Reinstall the arm into the engine and return the valve cover to complete the repair.
This is a manufacturer approved replacement part used on lawn and garden equipment. The push rod rides on the camshaft to push the exhaust valve open during the exhaust stroke. A bent push rod can not only affect your engine's performance, it can seriously damage other parts if the problem is not taken care of immediately. This part is made out of metal and it is sold individually.
This is a manufacturer approved replacement part used on lawn and garden equipment. The push rod rides on the camshaft to push the exhaust valve open during the exhaust stroke. A bent push rod can not only affect your engine's performance, it can seriously damage other parts if the problem is not taken care of immediately. This part is made out of metal and it is sold individually.
This replacement 115V line cord is sourced directly from the original equipment manufacturer for use with Ridgid drain cleaning machines. It is hardwired to the tool in order to supply electricity from a standard U.S. outlet, if the cord is damaged it is important to replace it before continuing to use the equipment. This high-quality rubber insulated power cord is sold individually.
This replacement 115V line cord is sourced directly from the original equipment manufacturer for use with Ridgid drain cleaning machines. It is hardwired to the tool in order to supply electricity from a standard U.S. outlet, if the cord is damaged it is important to replace it before continuing to use the equipment. This high-quality rubber insulated power cord is sold individually.
This is available as a set of four rings. They are authentic OEM sourced items which are specifically produced for use with Briggs & Stratton engines. The rings are part of the piston assembly and are made out of durable materials. If these parts become broken they will need to be replaced and may require a set of pliers during the installation.
This is available as a set of four rings. They are authentic OEM sourced items which are specifically produced for use with Briggs & Stratton engines. The rings are part of the piston assembly and are made out of durable materials. If these parts become broken they will need to be replaced and may require a set of pliers during the installation.
Installation Instructions
Morris from HOPE MILLS, NC
Mower was submerged in Hurricane Matthew
Total disassemble, clean out water and any rust. hone cylinder, wire brush where needed,reassemble with new rings,gaskets and seals and lucas oil product. Started on second pull. Mowed lawn. If you have never done this sort of work before, probably should not attempt.
This is sold as a set that contains three rings. The rings attach to the piston and help to create a seal. When replacing these parts a screwdriver, a set of pliers, and a socket set might all be required during the installation process. These parts are made out of metal and will need to be replaced if they break or bend. They are authentic Briggs & Stratton and Toro replacement parts that are sourced from the original manufacturer for use with engines, generators, tillers, and blower-vacuums.
This is sold as a set that contains three rings. The rings attach to the piston and help to create a seal. When replacing these parts a screwdriver, a set of pliers, and a socket set might all be required during the installation process. These parts are made out of metal and will need to be replaced if they break or bend. They are authentic Briggs & Stratton and Toro replacement parts that are sourced from the original manufacturer for use with engines, generators, tillers, and blower-vacuums.