Briggs and Stratton Engine Carburetors

Briggs and Stratton Engine Carburetor Overhaul Kit

★★★★★

★★★★★

4 Reviews

This is a replacement carburetor overhaul kit for your small engine. The carburetor is essential to the overall performance of your engine, and the carb can get clogged up over time for a variety of reasons. When your carb becomes clogged, it is often a good idea to take it apart and replace the various parts inside by purchasing a carburetor kit. This is a 15-piece set and contains everything that you will need to do a total overhaul of your carburetor. You may want to purchase some carb cleaner as well, to ensure that the new pieces in the carb kit fit and adhere properly.

Briggs and Stratton Engine Primer-Carburetor (7/8"Dia. Fits BS Quantum s 5, 5.5 &6 HP

★★★★★

★★★★★

2 Reviews

Briggs and Stratton Engine Diaphragm-Carburetor

★★★★★

★★★★★

3 Reviews

This is a carburetor diaphragm, which is an OEM part that pumps fuel from the tank to the engine. It is roughly 1x2 inches and black in color. Sold individually, this part can fail due to fatigue and wear, and if it is broken you may notice your engine is running rough or not starting. If your engine exhibits these signs of being starved of fuel, your diaphragm is damaged and needs to be replaced. Our customers found this repair to be of medium difficulty. It requires a wrench, screwdriver, and pliers to complete. You will be able to locate your diaphragm inside the carburetor itself to swap it out with your new one.

Briggs and Stratton Engine Kit-Needle/Seat

★★★★★

★★★★★

1 Review

This needle and seat kit, also known as a float valve, is found in many types of liquid-fueled lawn equipment, such as carburetors. The valve regulates the flow of fuel into the float bowl. The needle and seat work together to make sure that the valve opens and closes properly, so that it does not leak or overflow. If it is broken, you may notice a strong odor of fuel coming from your machine. Your engine may also run poorly or not start at all. A damaged or corroded float valve can cause fuel leaks, which can be dangerous as they are flammable. To remove the float valve, first disconnect the spark plug wire on your machine. You then need to consult your user manual to locate the float bowl of your machine and remove the bolts or screws securing their cover in place. When you lift off the cover, you will find the needle attached to the float. Using a pair of needle-nose pliers, grasp onto the needle and pull it out of the float. Keep in mind when you are purchasing this OEM-manufactured kit that it comes with the needle and seat together, but the float itself is not included.

Briggs and Stratton Engine Diaphragm-Carburetor

★★★★★

★★★★★

1 Review

Briggs and Stratton Engine Primer-Carburetor

Briggs and Stratton Engine Diaphragm-Carburetor

★★★★★

★★★★★

2 Reviews

Briggs and Stratton Engine Carburetor

★★★★★

★★★★★

1 Review

This is an Authentic OEM replacement part used on Lawn and Garden Engines. The purpose of this part is to mix air and gas before the fuel mix goes to the engine. If the engine won\'t start and the tank is full of fresh fuel, test the carburetor by removing the air filter and pouring about a teaspoon of fuel into the carburetor. Pull the starter rope. If the engine starts and then quickly dies, the carburetor is likely the problem. This Assembly includes a Metal Body Carburetor, Rubber O-Ring and a Gasket. When replacing Carburetor it is advised that you also replace Carburetor Gaskets to ensure proper Air Tight Seal for optimum performance. You will need a Screwdriver to perform this repair.

Briggs and Stratton Engine Bowl-Float

★★★★★

★★★★★

1 Review

Briggs and Stratton Engine Carburetor Rebuild Kit

★★★★★

★★★★★

1 Review

This is the replacement carburetor kit for your small engine, used for outdoor power equipment. The carburetor rebuild kit includes the float, needle, gaskets, and seals that you need to refurbish your carburetor. The carburetor is essential to proper engine performance so if it is dirty or damaged, it is recommended that you repair it using one of these carb kits. If basic adjustments to your carburetor will not fix your engine issues, it is an indication that you should repair the carburetor with this kit. The parts included in this kit are OEM parts sourced directly from the manufacturer.