My Orders
Briggs and Stratton Engine Exhausts
GET YOUR OFFICIAL Briggs and Stratton PARTS TO ENSURE VICTORY
Popular Briggs and Stratton Engine Exhausts
The purpose of a muffler is to soften the noise coming from the engine. It is an authentic replacement part that is sourced directly from original manufacturer for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. Please note this high quality item is sold individually.
The purpose of a muffler is to soften the noise coming from the engine. It is an authentic replacement part that is sourced directly from original manufacturer for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. Please note this high quality item is sold individually.
Installation Instructions
Philip from LINEVILLE, AL
Needed to replace muffler
Using a socket wrench with extension and a T20 star socket (you can use the appropriate hex head socket also) i removed to two bolts holding the muffler on. They are right on top of the engine and very accessible. Your model may have a heat shield that needs to be removed. Once the muffler is off remove the old gasket. It may be stuck to
... Read more
the muffler or exhaust opening on the engine. It should just pry of with a little effort. I did make sure there were no gasket pieces left behind. I placed the bolts through the flange of the new muffler and then slid the new gasket over the bolts. You can use a exhaust gasket sealant just hold it place while you place the flange in place and not have to worry about gasket dropping off. I just held it until I got the flange in place. I started the bolts by hand using the socket and extension. I alternated from each bolt until I had tighted it down. You can look up torque specs. I just used my grunt meter. It is good as new. Parts were OEM replacement. Not knock off almost right parts. I got very lucky when I found this company and will use them again.
Read less
This is an authentic exhaust muffler specially designed for Briggs and Stratton engines commonly used on Toro lawn and garden equipment. It is supplied directly from original equipment manufacturer and it is sold individually. Muffler softens the noise coming from the engine and provides an additional layer of filtration of exhaust. This metal muffler is manufactured to meet EPA exhaust regulations.
This is an authentic exhaust muffler specially designed for Briggs and Stratton engines commonly used on Toro lawn and garden equipment. It is supplied directly from original equipment manufacturer and it is sold individually. Muffler softens the noise coming from the engine and provides an additional layer of filtration of exhaust. This metal muffler is manufactured to meet EPA exhaust regulations.
Installation Instructions
Snoopy from TYRONE, GA
Muffler rusted out
hand tightened with threads into threaded insert
It is a genuine OEM sourced replacement muffler that is specially designed for Briggs and Stratton engines that are commonly installed on Toro lawn and garden equipment. Its purpose is to soften the noise coming from the engine and provide an additional layer of filtration of exhaust. This durable metal muffler is sold individually, it is manufactured to meet EPA exhaust regulations. Hardware to secure the muffler and the gasket are all included.
It is a genuine OEM sourced replacement muffler that is specially designed for Briggs and Stratton engines that are commonly installed on Toro lawn and garden equipment. Its purpose is to soften the noise coming from the engine and provide an additional layer of filtration of exhaust. This durable metal muffler is sold individually, it is manufactured to meet EPA exhaust regulations. Hardware to secure the muffler and the gasket are all included.
This is an authentic Briggs & Stratton replacement part that is sourced from the original manufacturer for use with engines. When replacing this part a wrench might be required during the installation process. It may become broken and will need to be replaced. The muffler is made of durable materials and includes all the necessary screws and gaskets.
This is an authentic Briggs & Stratton replacement part that is sourced from the original manufacturer for use with engines. When replacing this part a wrench might be required during the installation process. It may become broken and will need to be replaced. The muffler is made of durable materials and includes all the necessary screws and gaskets.
This is a genuine Briggs & Stratton and Toro replacement part for use in engines, lawn mowers, and lawn tractors. The muffler deflector is made out of metal. A wrench may be needed during the replacement of this item. It will need to be replaced if it breaks. This item is sold individually.
This is a genuine Briggs & Stratton and Toro replacement part for use in engines, lawn mowers, and lawn tractors. The muffler deflector is made out of metal. A wrench may be needed during the replacement of this item. It will need to be replaced if it breaks. This item is sold individually.
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
It is a genuine item that is supplied directly from the original equipment manufacturer for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. The purpose of this muffler is to reduce noise from a working engine, over time it may wear out and begin to fail eventually requiring a replacement. Keep in mind this high-quality component has a durable metal body and is sold individually.
It is a genuine item that is supplied directly from the original equipment manufacturer for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. The purpose of this muffler is to reduce noise from a working engine, over time it may wear out and begin to fail eventually requiring a replacement. Keep in mind this high-quality component has a durable metal body and is sold individually.
This item is available as an individual replacement part but also includes the screws. The muffler deflector attaches to the lo-tone muffler and is made of metal. A nutdriver might be required during the replacement of this item. It may become broken and will need to be replaced. This is an authentic Briggs & Stratton and Toro replacement part that is sourced from the original manufacturer for use with engines, snowthrowers, tillers, lawn mowers, and lawn tractors.
This item is available as an individual replacement part but also includes the screws. The muffler deflector attaches to the lo-tone muffler and is made of metal. A nutdriver might be required during the replacement of this item. It may become broken and will need to be replaced. This is an authentic Briggs & Stratton and Toro replacement part that is sourced from the original manufacturer for use with engines, snowthrowers, tillers, lawn mowers, and lawn tractors.
This is a genuine replacement part sourced from the original manufacturer for use with lawn tractor engines. The special muffler is commonly used to reduce emissions produced by the engine. Over time the muffler can wear out or become damaged and replacing the muffler is a relatively easy repair. A socket wrench and pliers may be required to complete the repair. This muffler assembly includes the exhaust elbow, gaskets, and hardware. These muffler kits are sold individually.
This is a genuine replacement part sourced from the original manufacturer for use with lawn tractor engines. The special muffler is commonly used to reduce emissions produced by the engine. Over time the muffler can wear out or become damaged and replacing the muffler is a relatively easy repair. A socket wrench and pliers may be required to complete the repair. This muffler assembly includes the exhaust elbow, gaskets, and hardware. These muffler kits are sold individually.
This is a genuine replacement part manufactured for use with small engines. The muffler assembly is complete including the adapters, the gasket, and mounting hardware. The exhaust muffler is sold individually.
This is a genuine replacement part manufactured for use with small engines. The muffler assembly is complete including the adapters, the gasket, and mounting hardware. The exhaust muffler is sold individually.
This muffler reduces exhaust noise while directing emissions safely away from the engine. Designed for durability, it supports efficient operation and consistent performance.
This muffler reduces exhaust noise while directing emissions safely away from the engine. Designed for durability, it supports efficient operation and consistent performance.