Briggs and Stratton Engine Tanks and Containers
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Briggs and Stratton Engine Tanks and Containers
Your Price
$78.26
In Stock
Briggs and Stratton Engine Fuel Tank
PartSelect Number PS9078285
Manufacturer Part Number 699374
This fuel tank is for lawn and garden equipment engines.
Fuel tank holds the gas that's needed by the engine.
Work in a well-ventilated area when installing this part. Drain the existing fuel from the tank and disconnect the spark plug wire before beginning the repair.
Your Price
$106.41
In Stock
Briggs and Stratton Engine Fuel Tank
PartSelect Number PS9141053
Manufacturer Part Number 799863
This genuine fuel tank assembly is sourced directly from the original equipment manufacturer and is specifically designed for use with Briggs & Stratton engines on lawn and garden equipment. It serves as the primary reservoir for storing fuel required by the engine.
Constructed from durable plastic, this assembly includes both the fuel tank and cap.
Note: Mounting hardware and fuel lines are sold separately. This tank features four mounting holes for secure installation.
For proper fit and installation, refer to your equipment’s model diagram.
Your Price
$76.22
In Stock
Briggs and Stratton Engine Tank, Fuel
PartSelect Number PS16444388
Manufacturer Part Number 84004115
This fuel tank safely stores fuel and supplies it to the system during operation. Built for durability, it supports consistent fuel delivery and reliable performance.
Your Price
$130.75
In Stock
Briggs and Stratton Engine Tank-fuel
PartSelect Number PS9290247
Manufacturer Part Number 591025
This fuel tank assembly is a genuine Briggs & Stratton OEM part designed for small engines. Built from fuel-resistant materials, it provides secure and reliable fuel storage to maintain optimal engine performance and comply with emission standards. Its durable construction ensures long-term use in demanding outdoor conditions. Installation is straightforward—remove the old tank and attach this replacement using the existing mounting points.
Your Price
$178.90
In Stock
Briggs and Stratton Engine Tank-fuel
PartSelect Number PS12631110
Manufacturer Part Number 595650
This fuel tank safely stores fuel and supplies it to the engine during operation. Built for durability and secure containment, it supports consistent fuel delivery and reliable engine performance.
Your Price
$144.00
In Stock
Your Price
$137.23
On Order
Your Price
$86.78
Special Order
Your Price
$191.24
In Stock
Briggs and Stratton Engine Tank-fuel
To replace the pull starter/recoil assy. Remove low oil warning light, and air filter housing then remove the 4 bolts holding the front cover. Once the front cover is free remove kill switch wire
Drill out the rivets holding the recoil housing w/ 3/16 bit. Screws w/ nuts are included to use in place of rivets, I used red Locktite on the screws which hold the started recoil to the front cover. Make sure the pull rope is correctly oriented in the 11:00 position. Replace front cover, four bolts. Air filter housing, kill switch wire and low oil warning light Read more...
PartSelect Number PS9294765
Manufacturer Part Number 691993
This fuel tank is a genuine OEM replacement part supplied by the original equipment manufacturer. It is commonly used in engines, shredders, and snowthrowers. This black fuel tank is made of plastic. It should be replaced if it is cracked, broken, or damaged. To replace this part, simply remove the brackets with a screwdriver. Please note the cap is included with the purchase of this part.
Installation Instructions
Dennis from EUFAULA, OK
Gas tank leaking, pull starter rivets worn, rope and rope bushing worn
The gas tank was a simple job, close the fuel shut off, remove fuel hose then back out 2 bolts on the mounting bracket. Reverse procedure to mount.To replace the pull starter/recoil assy. Remove low oil warning light, and air filter housing then remove the 4 bolts holding the front cover. Once the front cover is free remove kill switch wire
Drill out the rivets holding the recoil housing w/ 3/16 bit. Screws w/ nuts are included to use in place of rivets, I used red Locktite on the screws which hold the started recoil to the front cover. Make sure the pull rope is correctly oriented in the 11:00 position. Replace front cover, four bolts. Air filter housing, kill switch wire and low oil warning light Read more...
Your Price
$64.05
In Stock
Briggs and Stratton Engine Valve-fuel Shut Off(m
PartSelect Number PS9983826
Manufacturer Part Number 592840
The fuel shut off valve attaches to the handle shutoff valve. This item is made of metal and is available as an individual replacement part. It might require a screwdriver and an adjustable wrench to replace this item if it becomes broken. This is an original Briggs & Stratton and Toro part for use in engines, snowthrowers, tillers, lawn mowers, and lawn tractors.
Related Briggs and Stratton Engine Parts
- All Briggs and Stratton Engine parts
- Briggs and Stratton Engine Bearings
- Briggs and Stratton Engine Brackets and Flanges
- Briggs and Stratton Engine Caps and Lids
- Briggs and Stratton Engine Carburetors
- Briggs and Stratton Engine Circuit Boards and Touch Pads
- Briggs and Stratton Engine Control Cables
- Briggs and Stratton Engine Dipsticks
- Briggs and Stratton Engine Engines
- Briggs and Stratton Engine Exhausts
- Briggs and Stratton Engine Fans and Blowers
- Briggs and Stratton Engine Filters
- Briggs and Stratton Engine Handles
- Briggs and Stratton Engine Hardware
- Briggs and Stratton Engine Hoses and Tubes
- Briggs and Stratton Engine Ignitions
- Briggs and Stratton Engine Insulations
- Briggs and Stratton Engine Insulations
- Briggs and Stratton Engine Knobs
- Briggs and Stratton Engine Latches
- Briggs and Stratton Engine Manuals and Literatures
- Briggs and Stratton Engine Manuals and Literatures
- Briggs and Stratton Engine Motors
- Briggs and Stratton Engine Panels
- Briggs and Stratton Engine Pulleys
- Briggs and Stratton Engine Pumps
- Briggs and Stratton Engine Seals and Gaskets
- Briggs and Stratton Engine Sensors
- Briggs and Stratton Engine Springs and Shock Absorbers
- Briggs and Stratton Engine Starters
- Briggs and Stratton Engine Switches
- Briggs and Stratton Engine Transmissions and Clutches
- Briggs and Stratton Engine Trims
- Briggs and Stratton Engine Trims
- Briggs and Stratton Engine Valves
- Briggs and Stratton Engine Wheels and Rollers
- Briggs and Stratton Engine Wire Plugs and Connectors