Admiral Cooktop Parts

Admiral Appliance Parts
Shop By Appliance Type

Popular Admiral Cooktop Parts

Your Price
$8.00
  In Stock
Chrome Drip Bowl - 8 inch
★★★★★
★★★★★
(39)
PartSelect Number PS11750107
Manufacturer Part Number WPW10196405
This manufacturer-certified drip bowl is also known as a drip pan, and it is designed for use with cooktops and ranges. It sits below 8-inch burner elements and catches drips and spills from the cookware on the burner. The diameter of the drip bowl is approximately 10 inches. This replacement might appear slightly different, but it will fit your appliance. You will need no tools to complete this repair. Simply remove the burner element, remove the old bowl, line up the hole on the new bowl with the terminal block and drop it into place. Make sure the bowl is flat before reinstalling the element. While you have the element out you should inspect the terminals for corrosion, damage, or discolouration. If you notice any of those things you should also replace the element and terminal block. You will need to replace your drip bowl if it is lost, damaged, or can no longer be cleaned. This replacement part is sold individually. To extend the life of your new drip bowl we recommend you clean it regularly with soap and water. We recommend only using the recommended drip bowl for your appliance; generic versions will not fit properly which could affect the performance of your elements and cause long-term damage.
Fixes these symptoms
Installation Instructions
Joe from Greeley, CO
oven wouldn't heat
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, then removed element and replaced with new
.
Read more...
Your Price
$15.84
  In Stock
Drip Bowl - 6 Inch
★★★★★
★★★★★
(25)
PartSelect Number PS2366565
Manufacturer Part Number W10196406RW
If your element will not heat, there could be an issue with your drip bowl. This chrome drip bowl is 8 inches in diameter, and fits most electric ranges. Before you replace the drip bowl, make sure the element is turned off and cool to the touch. Installation is easy, just remove the element, replace the current drip bowl, and replace the element. Make sure the small hole on the bowl lines up with the element socket. The manufacturer has substituted this part, it now has a hole in the center, and no longer has a solid bottom. For a step by step guide, click the video below.
Fixes these symptoms
Installation Instructions
Michael from Kings Park, NY
Drip bowls were rusty and rotting through
I simply removed the elements and replaced the drip bowls with new ones. Put the elements back in and my stove looks %1000 better! Read more...
Your Price
$5.44
  In Stock
Drip Bowl - 6 Inch
★★★★★
★★★★★
(76)
PartSelect Number PS11750108
Manufacturer Part Number WPW10196406
This drip bowl is used for electric cooktops and ranges, it is designed to sit under a 6-inch surface burner. It catches the drips and spills coming from the cookware on the surface burner. This drip bowl is chrome, and it has a diameter of 8 inches. You need to remove the burner element to replace this part. Line the hole up with the element terminal blocks, and ensure the new bowl is flush with the surface of the cooktop before replacing the burner element. Drip bowls need to be replaced when they are lost, damaged, or you are no longer able to clean them adequately. This replacement part is sold individually.
Fixes these symptoms
Installation Instructions
Joe from Greeley, CO
oven wouldn't heat
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, then removed element and replaced with new
.
Read more...
Your Price
$15.48
  In Stock
Surface Burner Receptacle Kit
★★★★★
★★★★★
(18)
PartSelect Number PS1570190
Manufacturer Part Number 12001676
The tools you will need to replace the surface burner receptacle kit on your range include a Phillips screw driver, and a pair of wire strippers. Before doing this repair, make sure to disconnect your appliance from the power supply and wear work gloves to protect your hands. The surface burner receptacle kit comes with a plastic block, high temperature wire nuts, a metal bracket, and wires. This part functions as the connection between the wire harness and the surface element in your range.
Fixes these symptoms
Installation Instructions
Richard from Carthage, NC
Stove top element not working due to bad receptacle.
Turned off the power at the breaker box, cut the wires approximately 5 inches from the bad receptacle and removed it after removing one screw. Stripped back the wires about 1/2 inch and attached the new wires with the ceramic wire nuts provided and secured the receptacle back in place with the new screw provided in the kit.
My sister's husband wanted to scrap the whole range but I repaired it with $14.00 worth of parts.
The element is working great now.
Whenever I need appliance parts again I'll use partselect.com.
Read more...
Your Price
$64.03
  In Stock
Spark Module - Surface Burners
★★★★★
★★★★★
(9)
PartSelect Number PS2003170
Manufacturer Part Number 12001596
This part may differ in appearance, but functions same as original part. : This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
Fixes these symptoms
  • Element will not heat
  • Gas igniter glows, but will not light
  • Will Not Start
  • See more...
Installation Instructions
scott from centreville, VA
top burners on stove won't ignite ,no clicking noise
remove small panel on right side of stove,then un clip moduke and put wires from old module to new one.
Exact fit nomproblems.
Read more...
Your Price
$13.00
  In Stock
Surface Burner Plug-In Block Kit
★★★★★
★★★★★
(14)
PartSelect Number PS340571
Manufacturer Part Number 330031
The surface burner plug-in block kit features a newer-style terminal block. This kit is designed for use with ranges and cooktops. This terminal block is how the coil element on your stove connects to the inner wiring of your appliance. Without this connection your burner element would not get the electrical current it needs to heat up. When your element will not heat at all, or if it is not heating properly it is likely an issue with the terminal block. You need to remove the element to replace this part. While you have the element out, inspect the element and the terminal for any corrosion, arcing, or discoloration. If you notice any damage to the element or the terminals we recommend you replace this part as well. This kit includes two metal brackets, two pre-crimped high-temperature wire leads, two ceramic wire nuts, two heat-shrinking insulators, and a mounting screw. Before you begin this repair, make sure you have unplugged your appliance.
Fixes these symptoms
Installation Instructions
Jon from Oakley, CA
Surface elements quit working
Drilled out old and broken hold down clips, installed new ones(4). Cut old wires attached to surface plug in block, striped wires, and attached new plugin kit(4), warmed up heat shrink with a hair dryer, put in new drip bowels, the stove is like new.
I ordered the parts on line early one morning, the next day they were at my door and installed that day, everything that I ordered was there, and fit properly.

Way to go Part Select.com

Jon
Read more...
Your Price
$37.48
  In Stock
Standard Y-Frame Range Surface Burner
★★★★★
★★★★★
(10)
PartSelect Number PS11743366
Manufacturer Part Number WP660532
The standard y-frame surface burner provides heat to your range. If you notice that your element will not heat, you may need to replace your surface burner. This product is 6 inches in diameter, and 1500W. The manufacturer suggests replacing the receptacle at the same time that you replace the surface burner. Many of our customers have rated this repair as very easy, and you will not need any tools. To complete the repair, simply lift out the old burner and replace it with the new one. Check that the burners are turned off before you begin this repair.
Fixes these symptoms
Installation Instructions
Laurie from Tequesta, FL
Burner element broke and drip bowls needed to be replaced.
I went to the local discount mart and bought drip bowls. The ones available at that store did not fit, so I decided to buy directly from the stove's manufacturer distributor.

The drip pans were simple to replace, as was the new burner element. My old one had broke and was still working, but I decided to replace it when I ordered the drip pans.

Everything was easy to install and it looks like a brand new new stove top! I saved a lot of money doing it myself.
Read more...
Your Price
$79.39
  In Stock
Surface Burner Element - 8 Inch
★★★★★
★★★★★
(2)
PartSelect Number PS11740903
Manufacturer Part Number WP3191454
This large surface burner is 2100W.
Fixes these symptoms
Installation Instructions
Edward from Malvern, AR
Burner would not heat
First i shut off the power since this is an electric cook top/range. I then removed the knob and the two screws that hold the burner switch in place. I removed the wires one at a time and connected each to the new switch. I then reattached the screws to the switch. The most difficult part to me was breaking off the switch stem at the right level. I got that done and finally selected the appropriate adapter for the stem/knob fit. Read more...
Your Price
$52.13
  In Stock
Surface Element Switch
★★★★★
★★★★★
(3)
PartSelect Number PS12070192
Manufacturer Part Number W10900107
Fixes these symptoms
Installation Instructions
Paula Collins from Needham, MA
Old coil broke.
After I removed the piece of metal separating the two wires, I inserted the unit with no problem. Read more...
Your Price
$51.36
  In Stock
Burner Head Cap with Spark Electrode
★★★★★
★★★★★
(14)
PartSelect Number PS11741732
Manufacturer Part Number WP3412D024-09
The burner head cap with spark electrode directs the gas to the front and back burner heads and will equally distribute the gas across cooking areas. This part can help the following symptoms: if your oven will not start, element will not heat, the gas ignitor does not light, and/or gas spreads a smell. Make sure to rotate the burner assembly clockwise to release the burner from the top. Please note: this part has been updated and the gasket seal is no longer required. Make sure to unplug the oven before installing this part and wear work gloves to protect your hands.
Fixes these symptoms
  • Element will not heat
  • Gas igniter glows, but will not light
  • Gas smell
  • See more...
Installation Instructions
JEREMY from ARLINGTON, TN
Oven not working
There were no flames when I turned the oven on, so the first thing I did was narrow down the problem through the process of elimination. It was really a fairly simple system to work on. I verified that it was getting power to the hot surface igniter (which it was). You can check this visibly by seeing if it heats up and glows, but that is not enough. You also have to make sure the igniter is drawing enough amps to open the oven safety valve ( about 3-3.5 amps). You do this by leaving everything connected and turning the oven on as normal. You clamp the Amp Meter (a clamp style Amp Meter works best)to the wires going into the Hot Surface Igniter and checking amperage. If the amperage is to low then the igniter is not pulling enough to open the valve and you should replace it. If the amperage is as it should be then the valve is not opening. The next thing is to turn off the gas to the appliance and unplug the electricity before starting any other work. I removed the oven racks and bottom decking out of the way so I would have room to work. I removed the oven burner to get to the oven safety valve, which is held in by two screws. I disconnected the gas line coming in to the valve using an adjustable wrench, removed the two wires (noting their position) and removed the two screws with a phillips head screwdriver. I replaced the valve with a new one and hooked everything back up in reverse order. That was all there was to it. I also replaced a couple of burners on the top of the stove while I was at it, only because they were difficult to light sometimes. They simply twist out counterclockwise and have two wires that you can't get confused because they have different size connectors and will only go on one way. This 10 year old stove now works like a new one. Read more...

Appliance Type

Popular Admiral Cooktop Models

Below are the most popular Admiral Cooktop models we have. Enter your model number in the search box to find your model.