Chrome Drip Bowl - 8 inch WPW10196405 | Official Whirlpool Part | Fast Shipping | PartSelect
Quick Question!

Have you ever purchased from PartSelect.com before?

Chrome Drip Bowl - 8 inch – Part Number: WPW10196405
Chrome Drip Bowl - 8 inch – Part Number: WPW10196405 https://partselectcom.azureedge.net/Schematics/Maytag/45160.gif

Chrome Drip Bowl - 8 inch

31 Reviews
Your Price
$5.14

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11750107

Manufacturer Part Number WPW10196405

Manufactured by Whirlpool

This drip bowl is also known as a drip pan, and it is designed for use with cooktops and ranges. It sits below 8-inch burner elements, and catches drips and spills from the cookware on the burner. The diameter of the drip bowl is approximately 10 inches. This replacement might appear slightly different, but it will fit your appliance. You will need no tools to complete this repair. Simply remove the burner element, remove the old bowl, line up the hole on the new bowl with the terminal block and drop it into place. Make sure the bowl is flat before reinstalling the element. While you have the element out you should inspect the terminals for corrosion, damage, or discoloration. If you notice any of those things you should also replace the element and terminal block. You will need to replace your drip bowl if it is lost, damaged, or can no longer be cleaned. This replacement part is sold individually. To extend the life of your new drip bowl we recommend you clean it regularly with soap and water.

This part works with the following brands: Amana, Whirlpool, Magic Chef, Maytag, Roper, Caloric, Crosley, Admiral, Hardwick, Norge, Litton, Kenmore, KitchenAid, Hoover, Jenn-Air, Inglis, Estate, Glenwood

This part works with the following products: Range, Cooktop, Microwave Oven Combo

This part fixes the following symptoms: Element will not heat

Videos For installing this part.

Questions & Answers

Most Helpful

Question:

Hi trying to order the right drip bowls but mine doesn’t measure to be six inches it measures to be about seven and a half inches is this still the part I need?

Tom
July 20, 2017
Answer:

Hello Tom, what you are looking to measure should be the diameter of the outer edge where the drip bowl will be placed. The 6-inch drip bowl is found here W10196406RW, and the 8-inch can be found here WPW10196405. Best of luck with this repair!

9 people found this helpful.
Was this helpful?
Show Answer
Hide Answer
Question:

Why do your drip bowls have holes in the middle but mine doesn’t? am I looking in the wrong place or something

Sonya
July 20, 2017
Answer:

Hi Sonya, this drip bowl may look different than the original, but that is because it is a replacement part and is used for different models of ranges. The manufacturer does list this W10196406RW as the 6-inch drip bowl for your unit, and WPW10196405 as the 8-inch. It should work just as well as the one you are replacing. I hope this helps!

5 people found this helpful.
Was this helpful?
Show Answer
Hide Answer
Question:

How do I measure for a drip bowl. Inside or outside?

Chris
July 20, 2017
Answer:

Hello Chris, you need to measure the inner diameter of the drip pan, or measure across the “hole” so to speak. You could also measure the size of the element to see whether you need an 8-inch or a 6-inch drip bowl. Please let us know if you have any further questions.

3 people found this helpful.
Was this helpful?
Show Answer
Hide Answer

Most Recent

Question:

The drip pan that came with stove does not have an opening in the center but has opening for the element plug. The opening in the center of the drip pan looks like it would ruin the sheet metal. It is very thin there. I prefer that it doesn't have this opening. Where could I find them?

Maureen for model number WCC31430AW00
April 9, 2018
Answer:

Hi Maureen, Thank you for the question. Very sorry but the manufacture only makes these drip pans with the opening in the middle. The drip pans with the closed bottom are no longer made but these will fit and work fine for the model number provided. Hope this helps!

Was this helpful?
Show Answer
Hide Answer
Question:

I understand that the drip pans for this model are "universal" but I want/need drip pans that do not have vent holes in them. Are these not available anywhere or from anyone? I used to be able to get them from my local Maytag dealer but he has retired. I really want the solid ones not the vented ones!

Colleen for model number PER5510AAW
February 26, 2018
Answer:

Hello Colleen, Thanks for your question. There are no alternatives to this part for your model, unfortunately. I hope this helps.

Was this helpful?
Show Answer
Hide Answer
Question:

I am worried about ordering this replacement. I bought a set of drip pans for my stove a while ago and they were also somewhat universal. The 6" ones fit okay, but the 8" ones just wouldn't set flat not a good fit. Do you promise these will fit my Maytag stove?

Suzanne for model number PER5510BAQ
December 6, 2017
Answer:

Hi Suzanne, Thank you for your question. According to your manufacturer this bowl will fit your appliance and currently is the only option available. I hope that helps. Good luck with your repair.

1 person found this helpful.
Was this helpful?
Show Answer
Hide Answer

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 47 reviews What's this?
1-15 of 47
572 of 592 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Customer:
Joe from Greeley, CO
Oven wouldn't heat
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, then removed element and replaced with new
.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

466 of 468 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Customer:
susan from Owasso, OK
Temperature setting no longer readable
The new thermostat knob dial was installed in about a minute, good as brand new! I was concerned, as our range is about 25 years old, and my model number was not listed. But Partselect listed several similar models, and a quick spot check of these showed that the dial appears to be fairly universal for Whirlpool products. The new knob dial fit perfectly! The drip bowls also worked great.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

461 of 464 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Customer:
Donna from Dallas, TX
Drip bowls were burned and tacky
First I removed the old bowls and replaced them with the new.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

447 of 531 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Customer:
John from Chester, VT
Drip bowls needed to be replaced
took old bowls out, put new bowls in, took a coffee break

Help other customers find the most helpful instructions.

Were these instructions helpful?   

229 of 313 people found these instructions helpful
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench set
Customer:
Jon from Oakley, CA
Surface elements quit working
Drilled out old and broken hold down clips, installed new ones(4). Cut old wires attached to surface plug in block, striped wires, and attached new plugin kit(4), warmed up heat shrink with a hair dryer, put in new drip bowels, the stove is like new.
I ordered the parts on line early one morning, the next day they were at my door and installed that day, everything that I ordered was there, and fit properly.

Way to go Part Select.com

Jon

Help other customers find the most helpful instructions.

Were these instructions helpful?   

222 of 424 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Customer:
Jody from Moweaqua, IL
Heating element for oven broke in two.
Removed the two screws holding the heating element to the back of the oven. Pulled the wires away from the connections of the old element and connected the new element. Reinstalled the screws holding the element to the back of the oven. Easiest repair I've ever done! Replaced the drip pans on the cook top and installed the new clock knobs. Good as new!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

210 of 409 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench (Adjustable)
Customer:
Donna from Petaluma, CA
Needed to replace chrome drip bowls and replace one of the hold down clip since previous owner used incorrect drip bowls and put pressure on the hold down clip.
Pulled out the electric element from the range, replaced the new drip bowl on three of the burners and then replaced the electric element pushing it into the hold down clip. On the fourth burner, I removed the electric outlet, the previous incorrect drip bowl and had to drill out the broke off hold down clip that was no longer there. Next I placed the new hold down clip in position, alligned and fed the little screw through the hold down clip. I used a vice grip to hold the nut in place and with a screw driver tighened the nut. I placed the drip bowl in place, attached the electric element and slipped it into the new hold down clip. Everything went smoothly and I experienced an excellent repair job. We received prompt service and had no problems. I just hope the used appliance that we bought works now. It looks great. It is for a rental unit.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

210 of 412 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Customer:
Linda from Atlanta, GA
Old drip pans stained
Replaced old drip pans with new ones - very easy - even a 68 yr old lady can do it!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

83 of 92 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
More than 2 hours
Tools:
Customer:
Michael from Eden, VT
Regular parts replacement/maintenance.
We love our Jenn-Air electric range that we have owned since 1983 and couldn't get parts from where we bought it recently. We called around to Sears and other appliance dealers and they couldn't help us. We found your company searching on the internet and we are very much pleased with your parts listing and your great service. We will be back. Jody and Mike Hayden, Eden, Vt.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

134 of 255 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Customer:
cindy from Sebeka, MN
One of my burners would only work half the time, and you had to wobble it to make it work
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, connected the new element using the wire caps, and finished bye rescrewing the element backinto place.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

65 of 67 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Customer:
sylvia from ventnor city, NJ
We needed new drip pans and no one carried the model we needed
we removed the old pans after first removing the electric heating element and simply inserted tne new pans

Help other customers find the most helpful instructions.

Were these instructions helpful?   

66 of 127 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Customer:
Liza from College Point, NY
Replaced drip bowls in stove
Took out the old drip bowls and replaced with new bowls.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

65 of 129 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Customer:
Grace Mary from Canton, OH
Rented appartment in which none of the drain pans were the proper size making it very difficult to cook
I removed the element and then the drain pan and replaced with the new correct pans. I replaced the element and all was well.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

15 of 22 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Customer:
Robert from Santa Fe, NM
Installed new switches and elements
just move one wire at a time. Each switch has 5 wires and I am sure mixing them would not be good.

Ordered parts, they shipped same day. Arrived exactly as predicted. Totally non-stress. Can't find a thing to complain about.

Thanks PartSelect

Help other customers find the most helpful instructions.

Were these instructions helpful?   

7 of 8 people found these instructions helpful
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Customer:
CHARLES from SOMERSWORTH, NH
Cooktop elements worked intermittantly.
Turn the power off to the unit. Remove the cold element by lifting up and pulling out. Remove the drip pan. Remove the element plug screw and pull the plug up and out of the socket. Cut the leads to the plug as close to the plug end as possible to allow enough wire to splice the new plug in. Strip the insullation back 3/8" to allow for splicing. Install the shrink tube collar on the wire and place one new lead (prestripped at the factory)next to the old wire and place the wire nut provided over the bare wire ends and twist it on until it is tight. Bend the wire nut splice back over one of the leads and slide the shrink tape over it. Heat up the shrink tape with a hair dryer to make it tight over the wire nut connection. Repeat the process for the next lead. Slide the leads into the new socket. Install the socket and secure the the new screw provided. Reinstall the drip pan and plug in the heat element. Follow the same procedure for each element socket replaced. Turn the power back on.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-15 of 47
Customer Reviews
Average Rating:
31 Reviews
4.8
out of 5
Filter By Rating:
  • 5 Stars
    28
  • 4 Stars
    2
  • 3 Stars
    0
  • 2 Stars
    1
  • 1 Stars
    0
Sort by:
Sort by:

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11750107
Manufacturer Part Number: WPW10196405
Brand
Model Number
Description
Admiral
1058AF-CW
Range - Electric
Admiral
1058AF-CZ
Range - Electric
Admiral
1058AH-W
Range - Electric
Admiral
1058AH-Z
Range - Electric
Admiral
1058WF-CW
Range - Electric
Admiral
1058WF-CZ
Range - Electric
Admiral
1058WH-W
Range - Electric
Admiral
1068F-CZ
Range - Slide-in, Electric
Hoover
1151AA-36
Cooktop
Hoover
1151AA-36G
Cooktop
Hoover
1151AD-30
Cooktop
Hoover
1151AD-36
Cooktop
Hoover
1151AH-30
Cooktop
Hoover
1151AH-36G
Cooktop
Hoover
1151AJ-30
Cooktop
Admiral
1151AL-30
Cooktop
Hoover
1151AL-36G
Cooktop
Hoover
1151WA-36
Cooktop
Hoover
1151WA-36G
Cooktop
Hoover
1151WD-30
Cooktop
Hoover
1151WD-36
Cooktop
Hoover
1151WH-30
Cooktop
Hoover
1151WH-36G
Cooktop
Hoover
1151WJ-30
Cooktop
Admiral
1151WL-30
Cooktop
Hoover
1151WL-36G
Cooktop
Magic Chef
1500PAA
Range
Magic Chef
1500PAW
Range
Magic Chef
1500PRA
Range
Magic Chef
1500PRW
Range