Whirlpool Dryer Doors

Videos!

Your Price

$5.04

Whirlpool Dryer Door Catch Kit

★★★★★

125 Reviews

PartSelect Number PS334230

Manufacturer Part Number 279570

This part replaces your appliances latch (Door Latch Kit, Door Catch, Dryer Door Latch Kit). On your appliance you will find both a strike and a catch. The strike is mounted on the body of the dryer, while the catch is mounted on the dryer door. These two parts work together to keep your dryer door closed. The catch holds the door strike to keep the door closed during the drying cycle. If the door does not latch closed, you won’t be able to start a drying cycle. If this part is malfunctioning, you may not be able to open or close your door. In some instances, it may seem like your door is closing, but if it is not latching properly you won’t be able to start your drying cycle. You should replace this part as soon as it’s malfunctioning. Your dryer may run even though the latch is malfunctioning, but it is unsafe if the dryer continues to run while the door is open. This replacement part features 1 door latch kit which includes 2 strikes, 3 catches, and a set of instructions. This model is constructed of plastic and metal, and comes in white/silver.

Fixes these symptoms

Door Pops Open
Door won’t close
Lid or door won’t close
See more...

Installation Instructions

Terri from Saint Augustine, FL

Door Catch part had fallen out,/ was missing

Received your parts, Popped them both right into place, Even though only one side needed to be replaced, I wanted them to match up. It was amazing how easy this was. My husband was quite impressed I had ordered these rather then look for either a new or used dryer from some other source. Read more...

Your Price

$173.57

Whirlpool Dryer Door

PartSelect Number PS11751974

Manufacturer Part Number WPW10284127

Your Price

$28.96

Whirlpool Dryer Door Reversal Kit - Pewter

PartSelect Number PS973433

Manufacturer Part Number 8530072

Installation Instructions

Steven from BONNER, MT

needed the door to swing left instead of swinging right

Remove five screws holding the door hinge to the dryer frame. Remove the plastic cover over the screw holes on the opposite side. Remove the hinge from the door by removing two phillips head screws from the door edge and two phillips head screws from inside the door. Mount the hinge on the opposite side of the door. Attach to door to the opposite side with the five screws you removed previously. Remove and replace the the hinge cover and handle cover by popping out the plastic trim piece on the bottom and loosening the top trim pieces. Hook the replacement covers to the top trim pieces and pop the bottom piece back in. Replace the handle by removing two screws and put the new piece in. Tighten two screws and you're done Read more...