Tappan Range Hardware

Your Price

$11.59

Igniter/Orifice Mounting Screw

★★★★★

1 Review

PartSelect Number PS440022

Manufacturer Part Number 316240600

This part is the igniter/orifice mounting screw for your cooktop or range. It is approximately ½ an inch in length and is made of metal. The mounting screw connects the orifice to the cooktop. If the orifice is loose, or the screw is missing, this is the part that will replace it. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

Your Price

$9.41

Steel Washer

PartSelect Number PS436497

Manufacturer Part Number 316008401

This steel washer is also known as the range washer and is used on your oven door. The measurements for the steel washer are a three quarter inch outer diameter, and a one quarter inch inner diameter. This washer is an OEM part, made of steel, which is sourced directly from the manufacturer. This specific steel washer is used with your range, to secure the inner and outer door together and to secure the oven door handle back in place. Users have ranked this repair as a simple installation that should take you less than fifteen minutes to complete.

Installation Instructions

KELLY from LAKELAND, FL

Handle on oven door broke

called around and way to much money for repair man as well as parts from local appliance repair store. They wanted 10.00 for a screw that we got from you for $3.00 same as all the other parts saved over 70.00 dollars.

quick delivery and easy repair ... like new again .

would use you again Read more...

Your Price

$1.36

Top Burner Mounting Screw with Washer

PartSelect Number PS437925

Manufacturer Part Number 316069301

This is now a new zinc and black-coated screw that will resist rust and seizing.

Installation Instructions

robert from san diego, CA

i had 2 bad igniters

Since the burner was rusted I decided to replace the entire burner not just the igniter. Ifound that it was more cost effective to put in all new instead of a cheap quick fix. I took a socket wrench to the screws and a cresent wrench for the gas lines. Shut off gas first. Disconnect gas lines first then unscrew the three screws remove then replace with new burner attach screws connect gas lines. Turn on gas check for leaks close cover all finished. Read more...