Tappan Range Circuit Boards and Touch Pads

Videos!

Your Price

$139.63

Tappan Range Oven Electronic Control Board

★★★★★

13 Reviews

PartSelect Number PS12114577

Manufacturer Part Number 5304509493

Fixes these symptoms

Element will not heat
Little to no heat when baking
Oven is too hot
See more...

Installation Instructions

Robert from Slidell, LA

Bake element blew out

Removed and replaced bake element. Discovered that oven control module had also blown out. Ordered and replaced new control unit. Stove placed back in service. Read more...

Videos!

Your Price

$116.35

Tappan Range Electronic Clock Assembly

★★★★★

26 Reviews

PartSelect Number PS12728848

Manufacturer Part Number 5304518660

This is the electronic clock timer mechanism only. The overlay or touch pad is NOT included. To get the overlay, please use the model# of your appliance to search.

Fixes these symptoms

Element will not heat
Little to no heat when baking
Little to no heat when broiling
See more...

Installation Instructions

earl from seattle, WA

Oven elements would not heat

Initially, I tested the temperature sensor and it was OK. I pulled out the range and shut off the circuit breaker to it. I removed the upper back sheet metal panel to expose the clock timer. I removed the 4 screws to it, unplugged the wires to it and plugged them into the new clock timer. I carefully removed the plastic facing stuck to the face of the old clock timer and stuck it on the new clock timer. No new adhesive was necessary. I placed the newly connected clock timer in position and secured it with the 4 screws that secured the old clock timer. I pushed the range back into position and reset the circuit breaker. I turned the oven on and the problem was resolved. Read more...

Your Price

$106.65

Tappan Range Control

★★★★★

17 Reviews

PartSelect Number PS12717913

Manufacturer Part Number 5304518661

This part is a replacement electronic clock/timer for your oven. The clock timer will display the time, and can be used to set a timer. If the clock will not start, will not allow you to program the time or timer, or if the touchpad does not respond at all, you may need to replace the clock. As you will be working around electricity for this repair, be sure to disconnect power from the oven before you begin. This part is sold individually.

Fixes these symptoms

Element will not heat
Little to no heat when baking
Touchpad does not respond
See more...

Installation Instructions

Alberto from Houston, TX

We had a transformer go out in our block and made a surge which blew out the electronic oven control

The repair of the oven was really easy . I removed a total of 7 screws with a 1/4 inch nut driver to remove the back cover of the instrument panel. I then unplugged the wires from the from the oven control and with a phillups screw driver I removed 4 screws that hold the oven control,the face plate with the words on it has to be taken off the old control and put on the new one . I then installed the new oven control by putting the 4 screws back on and plugging back the wires. I then replaced the back cover with the 7 screws and plugged the power back in the outlet, The clock has to be adjusted and your done. Read more...

Videos!

Your Price

$42.95

Tappan Range Overlay

★★★★★

1 Review

PartSelect Number PS12114508

Manufacturer Part Number 316220728

White in color. Overlay only.

Fixes these symptoms

Touchpad does not respond
See more...

Installation Instructions

John from Montesano, WA

broiler element would not shut off

I had already switched off the breaker for the range, so I unplugged the unit and moved it out from the wall. I removed the screws on the rear cover and exposed the clock/timer. I then removed the four screws holding the clock/timer,used my pocket knife to gently pry the wires off of the old unit one at a time, as these were very tight. Holding the new clock/timer in my other hand I installed the wires one at a time to match the original clock timer wiring.I installed the clock/timer, the range back cover, slid the range back into place, plugged it in and turned on the breaker. My wife is happy, I am too.
A repair shop wanted $100.00 just to go to our home and look at our range. We spent $104.00 plus $20.00 for the new overlay, fifteen minutes of my time, a real bargin!
Thank you PartSelect, I'll be ordering from you again! Read more...

Your Price

$32.95

Tappan Range Overlay

★★★★★

6 Reviews

PartSelect Number PS12114509

Manufacturer Part Number 316220729

This part is a replacement clock overlay for your range. It is black in color and approximately 7 inches by 3 inches. The clock overlay is found on the control panel, and it covers and labels the selection buttons of the oven control board. If the touchpad will not respond, or the oven will not start, you may need to replace the clock overlay. Be sure to disconnect the range from the power source before you begin this repair. This part is sold individually and is an authentic OEM part.

Fixes these symptoms

Little to no heat when baking
Touchpad does not respond
Will not program
See more...

Installation Instructions

Thomas from St. Petersburg, FL

unit lost digital display, wouldn't control oven

First I weighted out weather it was better to repair the unit or relpace it with a used one. The stove was in good condition so a small investment of $140.00 was a no brainer, repair went off smothly once I found your web site and could see the parts I needed for the repair, also realy enjoyed the timely manor in which I received the parts, Thanks. Tom Read more...

40% OFF

Your Price

$84.99

$141.61

Tappan Range Electronic Control Board

★★★★★

4 Reviews

PartSelect Number PS12364897

Manufacturer Part Number 5304511908

This oven control board is for ranges. Oven control board monitors the temperature and controls the oven heat. Unplug the range or shut off the house circuit breaker for the range before servicing the unit. Wear work gloves to protect your hands.

Fixes these symptoms

Element will not heat
Little to no heat when baking
Touchpad does not respond
See more...

Installation Instructions

Glenn from MONETT, MO

Oven would not work

Took 5 screws off back of stove, removed 2 screws from control board, replaced board, put back together, make sure you un plug stove before removing back. Read more...

Your Price

$51.43

Tappan Range Overlay (black)

★★★★★

2 Reviews

PartSelect Number PS2581771

Manufacturer Part Number 316419141

This is the overly only. Control board is NOT included. Black in color. Genuine OEM part.

Fixes these symptoms

Touchpad does not respond
See more...

Installation Instructions

Robert from Slidell, LA

Bake element blew out

Removed and replaced bake element. Discovered that oven control module had also blown out. Ordered and replaced new control unit. Stove placed back in service. Read more...

Your Price

$127.99

Tappan Range Electronic Control Board

★★★★★

5 Reviews

PartSelect Number PS12114578

Manufacturer Part Number 5304509983

Fixes these symptoms

Touchpad does not respond
Will not program
Will Not Start
See more...

Installation Instructions

Floyd from ROCKVILLE CTR, NY

Circuit breaker tripping due to short circuit in the appliance.

After turning the power off and once I removed the back panel to access the wiring, the soot at the contact point of the short circuit was easily visible. It was the oven bulb socket that had come loose and caused the problem. I insulated the wire at the terminal point and reattached the fixture. All in less than 15 minutes.I turned the power back on and now it's good as new. Read more...

Your Price

$43.95

Tappan Range Overlay (black)

PartSelect Number PS438714

Manufacturer Part Number 316101514

This part goes in front of the clock/timer to allow visual indication of where the buttons are on the oven. Example bake, broil & clean. Only available in white. Black version is no longer available.

Installation Instructions

Michael from Anchorage, AK

Overlay was cracked, drawer glide missing

Overlay replacement is easy; 1st remove two screws that hold panel to top of stove (philips screwdriver) and lift up off of lip at very top, 2nd remove two screws that hold control to panel (nutdriver or square drive screwdriver), 3rd peel old overlay from control panel face (make sure you get any & all little bits so new overlay sits flush), 4th peel backing from overlay and position over control panel (peel protective film from face of overlay as well), 5th reposition control panel and reinstall two screws removed in step two above, lastly reposition top panel on stove and reinstall the two screws removed in step one above.
Drawer glide just snaps into place on the lower rear corners of drawer, then you slide drawer back into place. Read more...