Samsung Refrigerator Hinges
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Samsung Refrigerator Hinges
Your Price
$12.85
In Stock
Samsung Refrigerator Hinge
PartSelect Number PS4145262
Manufacturer Part Number DA61-08305A
This French door hinge is an authentic OEM part used in refrigerators. It is used to provide support and stability to the door allowing it to open and close smoothly. The hinge is vulnerable to wear and tear, and mechanical damage over time. A faulty door hinge will result in difficulty opening/closing the door, door misalignment, inadequate sealing, and increased energy consumption. To begin this repair, locate the screws that hold the hinge to the refrigerator frame and remove them. Carefully lift the door off the hinge and set it aside. Remove the faulty hinge and position the new one in its place. Reattach the door to the new hinge and secure the hinge to the refrigerator frame using the appropriate fasteners.
Fixes these symptoms
- Door won’t open or close
- See more...
Your Price
$7.47
In Stock
Samsung Refrigerator Hinge
PartSelect Number PS4143931
Manufacturer Part Number DA61-03230B
This is a French door hinge that is compatible with various models of refrigerators and is used to control the mullion (long plastic strips) on the inside portion of the French doors. If you notice that your doors open and the mullion either moves freely or is stuck, this hinge needs to be replaced immediately to prevent issues with frost buildup, energy efficiency and temperature fluctuations. Replacing this hinge is quite simple, and you will only need a flathead and Philips-head screwdriver to do it. First, remove the screw covers from the securing screws for the mullion. Unscrew and remove the securing screws with your Philips-head screwdriver, and then pull the mullion up and out carefully to dislodge it from the fridge door. Near the middle of the mullion, disconnect the wire harness to remove the mullion completely. Remove the hinge cover with a flathead screwdriver to expose the hinge, and then carefully remove and replace the old hinge onto its attaching spring. Then you can simply reassemble the rest of the door assembly, along with the hinge cover and wire harness.
Fixes these symptoms
- Door won’t open or close
- See more...
Your Price
$6.40
In Stock
Samsung Refrigerator Grommet Hinge
PartSelect Number PS4151521
Manufacturer Part Number DA63-06410A
This genuine OEM door hinge bushing or grommet is installed inside the door panel of your refrigerator. It creates a smooth surface for the door hinge pin to pivot in, preventing door misalignment and ensuring a tight seal to keep your food fresh and your energy bills low. You will find it within the hinge assembly, usually at the top or bottom of the refrigerator door where it connects to the main body of the fridge. If the bushing is broken, you might notice the fridge door is harder to open or close, makes unusual noises during operation, or appears misaligned. Since this replacement part is sold individually, make sure to confirm how many your model will need before making your purchase.
Your Price
$86.96
In Stock
Samsung Refrigerator Upper Hinge Assembly
PartSelect Number PS4176617
Manufacturer Part Number DA97-12573A
Upgrade your Samsung refrigerator with this upper door hinge, a premiere, high-quality product produced by Samsung itself! Suk your kitchen will remain a paradise of organization and efficiency with this hinge designed to keep your fridge door in secure closure. Taking into account its compatibility with a variety of Samsung refrigerator models, it offers immense flexibility in installation and adaptation. Not just that, its easy installation process makes it a favorite among customers. Armored with the boldness of an Upper Left Hinge Assembly, it allows your fridge door to pivot smoothly between the realms of open and closed. A smart way to ensure safety while handling, we suggest you wear work gloves during the installation.
Fixes these symptoms
- Door won’t open or close
- See more...
Your Price
$92.29
In Stock
Samsung Refrigerator Upper Door Hinge (right)
1. Top front of fridge: remove cover, about 4 Philips Head screws, lift up and slide back, being careful of small wires (door position sensing magnetic switches).
2. We are working on the upper right door hinge: this was way too simple, there is a toggle lever that locks the upper bearing plate in position; flip toggle up and remove, remove hinge.
3. lower right hinge: using the metric Allen Key, unscrew the fasteners on hinge plate (right tightly, lefty loosey) turn counter clockwise to remove screws.
4. There exists a small black thimble sized bushing on the old hinge that goes onto the new one. It didn't come with the lower right hinge but is a part the fits onto the pivot. If you need a new one, remember it doesn't come with the hinge. (check the door for it too, maybe it got stuck in there.
Place the black bushing onto the new hinge pivot point; there is a slight flat in this part so you may need to rotate it before it will push on.
5. Mount new lower right hinge; using the metric Allen key, evenly screw in all screws, then put a final tightness (about the same torque effort to open a twist cap beer).
6. Now the door: make sure you placed the new upper hinge with arms reach on top of the fridge. Lift door, balance and bring it to the position slightly above where it will be in, lower it onto the lower right hinge pivot, allow the hinge to take the weight but hold the upper.
7. You are holding the door and need to place the upper right hinge into the door and also the mounting plate, this is easy and the door is not heavy. Once the upper hinge finds its location, you can put that metal toggle back on and swing down. It is not a tight fit, there is some wiggle room, that is normal. The plastic cover we removed in the first step, also prevents that latching toggle from being opened accidentally.
8. Put the plastic cover back, watch those small wires, screw torque is lightly, just screw them all back in but don't overly tighten.
9. The door is now back on!
Are we finished yet? We'll I thought I was too but the door height wasn't quite right. I went online and learned that the lower right hinge, also has an adjustment.
Open up the lower freezer door several inches.
Using a philips head screwdriver, at the bottom facing up, there is a hole where you put the screwdriver, screw clockwise to raise door. This is basically pushing up on that black plastic bushing you put back on the new hinge. Read more...
PartSelect Number PS4176618
Manufacturer Part Number DA97-12574A
Fixes these symptoms
- Door won’t open or close
- See more...
Installation Instructions
JOSEPH from WILMINGTON, NC
Friend lost balance, grabbed refrigerator door and it broke the hinges.
Was incredibly easy.1. Top front of fridge: remove cover, about 4 Philips Head screws, lift up and slide back, being careful of small wires (door position sensing magnetic switches).
2. We are working on the upper right door hinge: this was way too simple, there is a toggle lever that locks the upper bearing plate in position; flip toggle up and remove, remove hinge.
3. lower right hinge: using the metric Allen Key, unscrew the fasteners on hinge plate (right tightly, lefty loosey) turn counter clockwise to remove screws.
4. There exists a small black thimble sized bushing on the old hinge that goes onto the new one. It didn't come with the lower right hinge but is a part the fits onto the pivot. If you need a new one, remember it doesn't come with the hinge. (check the door for it too, maybe it got stuck in there.
Place the black bushing onto the new hinge pivot point; there is a slight flat in this part so you may need to rotate it before it will push on.
5. Mount new lower right hinge; using the metric Allen key, evenly screw in all screws, then put a final tightness (about the same torque effort to open a twist cap beer).
6. Now the door: make sure you placed the new upper hinge with arms reach on top of the fridge. Lift door, balance and bring it to the position slightly above where it will be in, lower it onto the lower right hinge pivot, allow the hinge to take the weight but hold the upper.
7. You are holding the door and need to place the upper right hinge into the door and also the mounting plate, this is easy and the door is not heavy. Once the upper hinge finds its location, you can put that metal toggle back on and swing down. It is not a tight fit, there is some wiggle room, that is normal. The plastic cover we removed in the first step, also prevents that latching toggle from being opened accidentally.
8. Put the plastic cover back, watch those small wires, screw torque is lightly, just screw them all back in but don't overly tighten.
9. The door is now back on!
Are we finished yet? We'll I thought I was too but the door height wasn't quite right. I went online and learned that the lower right hinge, also has an adjustment.
Open up the lower freezer door several inches.
Using a philips head screwdriver, at the bottom facing up, there is a hole where you put the screwdriver, screw clockwise to raise door. This is basically pushing up on that black plastic bushing you put back on the new hinge. Read more...
Your Price
$7.47
In Stock
Samsung Refrigerator Upper Hinge Closing Cam - Left
PartSelect Number PS4156797
Manufacturer Part Number DA66-00558B
This door closer (part number DA66-00558B) is for refrigerators. Door closer DA66-00558B helps the door open and close smoothly. Wear work gloves to protect your hands when installing this part.
Fixes these symptoms
- Door won’t open or close
- See more...
Installation Instructions
Gregory from ONTARIO, CA
Cracked left bottom door hinge
Unplug refrigerator Turn off water supply to ice maker. Unscrew plastic top cover. Unplug all of the electronic connectors Ooen both doors and remove the base plate 3 screws Disconnect the 2 water lines. Have a container to catch the water. Instructions on how to disconnect are on a tag locates in in of the water lines Unscrew the 3 bolts holding the top door hinge and the ground wire Remove the door by lifting up . The water hoses will lift out of the broken base hinge. Remove the broken hinge by pulling straight up. It slides out. Slide the new hinge in. Remount the door by inserting the hoses through the hinge hole. 2 people is helpful. Attach the top door hinge, reconnect the water lines, base cover and Reconnect electronics wires and cover. Good to go
Read more...
Your Price
$25.75
In Stock
Samsung Refrigerator Accessory Assembly
PartSelect Number PS6448337
Manufacturer Part Number DA99-04158A
This door adjustment accessory assembly is a genuine OEM replacement kit for Samsung refrigerators. It includes four black, plastic hinge shims or door stops. The hinge shim is positioned between the door hinge and the mounting surface of the fridge, and it is used to adjust the alignment of the fridge door in order to reduce the swing of the door, and to allow the fridge to close smoothly and remain securely shut. The hinge is used to correct problems such as door instability, sagging, and misalignment. Over time the hinge shim(s) may wear down, lose tension, or break and the door may become unstable and damage the surrounding cabinets.
Your Price
$26.56
On Order
Your Price
$72.00
In Stock
Samsung Refrigerator Hinge (left)
PartSelect Number PS4145263
Manufacturer Part Number DA61-08309A
Restore smooth door operation with this genuine Samsung upper left hinge for select French door refrigerator models. This durable component supports the door, maintains proper alignment, and allows effortless opening and closing. Ideal for replacing a broken or worn hinge, it helps prevent sagging and ensures a secure fit. Built to Samsung’s original specifications, it offers long-lasting performance and reliability. Installation typically involves removing screws, disconnecting any wiring harnesses if applicable, and securing the new hinge in place using basic tools such as a Phillips screwdriver and work gloves.
Your Price
$74.08
In Stock
Samsung Refrigerator Assembly Hinge Low-l;guggenh
PartSelect Number PS4173973
Manufacturer Part Number DA97-06158A
Keep your Samsung refrigerator functioning optimally with our high-quality replacement door hinge. Made of durable materials, this lower hinge assembly is designed to provide sturdy support and allows seamless door pivot. It's a genuine OEM item, ensuring perfect compatibility with your appliance. Reliably engineered, this left side lower hinge assembly promises enduring performance. All necessary hardware is included, making it effortless to install. Don't settle for less; choose our reliable Samsung assembly hinge to ensure your refrigerator's peak performance.
Fixes these symptoms
- Door won’t open or close
- See more...
Installation Instructions
Gregory from ONTARIO, CA
Cracked left bottom door hinge
Unplug refrigerator Turn off water supply to ice maker. Unscrew plastic top cover. Unplug all of the electronic connectors Ooen both doors and remove the base plate 3 screws Disconnect the 2 water lines. Have a container to catch the water. Instructions on how to disconnect are on a tag locates in in of the water lines Unscrew the 3 bolts holding the top door hinge and the ground wire Remove the door by lifting up . The water hoses will lift out of the broken base hinge. Remove the broken hinge by pulling straight up. It slides out. Slide the new hinge in. Remount the door by inserting the hoses through the hinge hole. 2 people is helpful. Attach the top door hinge, reconnect the water lines, base cover and Reconnect electronics wires and cover. Good to go
Read more...
Related Samsung Refrigerator Parts
- All Samsung Refrigerator parts
- Samsung Refrigerator Blades
- Samsung Refrigerator Caps and Lids
- Samsung Refrigerator Circuit Boards and Touch Pads
- Samsung Refrigerator Compressors
- Samsung Refrigerator Door Shelves
- Samsung Refrigerator Doors
- Samsung Refrigerator Drawers and Glides
- Samsung Refrigerator Filters
- Samsung Refrigerator Handles
- Samsung Refrigerator Handles and Latches
- Samsung Refrigerator Hardware
- Samsung Refrigerator Hoses and Tubes
- Samsung Refrigerator Ice Makers
- Samsung Refrigerator Lights and Bulbs
- Samsung Refrigerator Motors
- Samsung Refrigerator Panels
- Samsung Refrigerator Seals and Gaskets
- Samsung Refrigerator Sensors
- Samsung Refrigerator Switches
- Samsung Refrigerator Thermostats
- Samsung Refrigerator Trays and Shelves
- Samsung Refrigerator Valves