My Orders
Samsung Refrigerator Handles
GET YOUR OFFICIAL Samsung PARTS TO ENSURE VICTORY
Popular Samsung Refrigerator Handles
This freezer handle support is a 2.5-inch by 1-inch white plastic bracket designed to provide support and stability to the right side of the freezer door handle. It is an authentic manufacturer replacement part that distributes the force placed on the handle during use to prevent excessive stress on one area of the handle. The handle support also secures the handle to the freezer door. You can find it on the inner right side of the freezer door handle. Over time the screw that secures the handle support may wear down or become stripped, or the plastic bracket may crack, causing the handle support to become unstable and unable to support the door handle. To access the faulty handle support bracket, first unthread the screws that secure it to the freezer door handle. Detach the handle and remove the screws that secure the handle support to the freezer door. Align the new handle support with the attachment points on the freezer door and secure it with the appropriate screws. Attach the handle to the new support and ensure it is securely fastened. Be careful not to not to overtighten the screws, to avoid stripping the mounting holes and damaging the handle support. Screws are sold separately. Please note that this support is for the right side of the handle. The left-side support is sold separately.
This freezer handle support is a 2.5-inch by 1-inch white plastic bracket designed to provide support and stability to the right side of the freezer door handle. It is an authentic manufacturer replacement part that distributes the force placed on the handle during use to prevent excessive stress on one area of the handle. The handle support also secures the handle to the freezer door. You can find it on the inner right side of the freezer door handle. Over time the screw that secures the handle support may wear down or become stripped, or the plastic bracket may crack, causing the handle support to become unstable and unable to support the door handle. To access the faulty handle support bracket, first unthread the screws that secure it to the freezer door handle. Detach the handle and remove the screws that secure the handle support to the freezer door. Align the new handle support with the attachment points on the freezer door and secure it with the appropriate screws. Attach the handle to the new support and ensure it is securely fastened. Be careful not to not to overtighten the screws, to avoid stripping the mounting holes and damaging the handle support. Screws are sold separately. Please note that this support is for the right side of the handle. The left-side support is sold separately.
This left handle end cap assembly is designed to secure the refrigerator door handle while concealing the mounting hardware for a clean, finished appearance. Installed on the left side of the handle assembly, it helps provide a stable and comfortable grip for everyday opening and closing of the refrigerator door. Replacing a cracked, broken, loose, or damaged end cap can restore both the appearance and structural integrity of the handle, helping to prevent further wear or handle instability. Installation is a straightforward repair that typically involves removing the handle, replacing the damaged end cap, and reattaching the handle to the door. For best results, inspect the handle, mounting brackets, and fasteners for wear or damage and replace any faulty components as needed to ensure a secure fit and reliable operation.
This left handle end cap assembly is designed to secure the refrigerator door handle while concealing the mounting hardware for a clean, finished appearance. Installed on the left side of the handle assembly, it helps provide a stable and comfortable grip for everyday opening and closing of the refrigerator door. Replacing a cracked, broken, loose, or damaged end cap can restore both the appearance and structural integrity of the handle, helping to prevent further wear or handle instability. Installation is a straightforward repair that typically involves removing the handle, replacing the damaged end cap, and reattaching the handle to the door. For best results, inspect the handle, mounting brackets, and fasteners for wear or damage and replace any faulty components as needed to ensure a secure fit and reliable operation.
This handle end cap, also known as a door handle mounting cap, is a genuine OEM replacement part for Samsung Freezers. It is a gray, stainless steel cap, with measurements of approximately 4 inches by 2 inches. It is designed to secure the door handle to the freezer door. If the handle end cap is faulty, the door handle will be unstable and may fall off. Replace this part promptly to avoid damaging the handle or front panel of your freezer. It is important to note that this part is intended for the right side of the door handle. You will need a different part for the left side. Each handle end cap is sold separately.
This handle end cap, also known as a door handle mounting cap, is a genuine OEM replacement part for Samsung Freezers. It is a gray, stainless steel cap, with measurements of approximately 4 inches by 2 inches. It is designed to secure the door handle to the freezer door. If the handle end cap is faulty, the door handle will be unstable and may fall off. Replace this part promptly to avoid damaging the handle or front panel of your freezer. It is important to note that this part is intended for the right side of the door handle. You will need a different part for the left side. Each handle end cap is sold separately.
Installation Instructions
Lee from Chapel Hill, NC
Right side of freezer door handle broke
This is the older model of the Samsung refrigerator, so there is **no Allen screw underneath the handle** to remove it. That was a change made on newer models.
To replace the broken freezer handle cap:
1. **Remove the gray top cover.** Slide the gray cover forward, then lift it up and off.
2. **Remove the ... Read more two Phillips screws** underneath the cover.
3. **Remove the front tabs.** Gently pry the front of the tabs forward. Using needle-nose pliers, carefully pull the tabs out.
4. **Remove the broken cap.** Once the tabs are removed, the broken cap can be taken off.
5. **Remove the handle from the old cap.** In my case, the handle had broken away from the old cap. There are two Phillips screws securing the handle to the cap. Remove those screws and separate the handle from the old cap.
6. **Reuse the silver hinge pin.** Before discarding the old cap, remove the silver rod/hinge pin by sliding it out. You will reuse this pin in the new cap. If necessary, apply a small amount of light lubricant to help it slide out and back in.
7. **Attach the handle to the new cap.** Use the two Phillips screws to attach your existing freezer handle to the new cap.
8. **Install the new cap and handle.** Position the new cap and handle assembly on the freezer door. This part is a little fiddly, so be patient and make sure everything is properly aligned before tightening anything.
9. **Reinstall the two tabs.** Put the tabs back into position and secure them with the two Phillips screws.
10. **Replace the gray cover.** Snap the gray cover back over the new cap.
That's it. The key difference with this older Samsung model is that **you do not remove the handle with an Allen screw**. The handle is secured to the cap with two Phillips screws, and the silver hinge pin from the original cap is reused in the replacement cap.
To replace the broken freezer handle cap:
1. **Remove the gray top cover.** Slide the gray cover forward, then lift it up and off.
2. **Remove the ... Read more two Phillips screws** underneath the cover.
3. **Remove the front tabs.** Gently pry the front of the tabs forward. Using needle-nose pliers, carefully pull the tabs out.
4. **Remove the broken cap.** Once the tabs are removed, the broken cap can be taken off.
5. **Remove the handle from the old cap.** In my case, the handle had broken away from the old cap. There are two Phillips screws securing the handle to the cap. Remove those screws and separate the handle from the old cap.
6. **Reuse the silver hinge pin.** Before discarding the old cap, remove the silver rod/hinge pin by sliding it out. You will reuse this pin in the new cap. If necessary, apply a small amount of light lubricant to help it slide out and back in.
7. **Attach the handle to the new cap.** Use the two Phillips screws to attach your existing freezer handle to the new cap.
8. **Install the new cap and handle.** Position the new cap and handle assembly on the freezer door. This part is a little fiddly, so be patient and make sure everything is properly aligned before tightening anything.
9. **Reinstall the two tabs.** Put the tabs back into position and secure them with the two Phillips screws.
10. **Replace the gray cover.** Snap the gray cover back over the new cap.
That's it. The key difference with this older Samsung model is that **you do not remove the handle with an Allen screw**. The handle is secured to the cap with two Phillips screws, and the silver hinge pin from the original cap is reused in the replacement cap.
Read less
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This handle end cap, also known as a handle mount cap, is compatible with various models of Samsung freezers. This stainless-steel cap has dimensions of approximately 4 inches in length and 2 inches in width. The cap is designed to secure the left side of the door handle and keep it firmly attached to the outer panel of the freezer. You will need to replace the handle end cap if it is damaged or worn down and the door handle has become unstable or wobbly. Each handle end cap is sold individually. Inspect the right-side cap in case it needs to be replaced as well, as they tend to wear out at the same time.
This handle end cap, also known as a handle mount cap, is compatible with various models of Samsung freezers. This stainless-steel cap has dimensions of approximately 4 inches in length and 2 inches in width. The cap is designed to secure the left side of the door handle and keep it firmly attached to the outer panel of the freezer. You will need to replace the handle end cap if it is damaged or worn down and the door handle has become unstable or wobbly. Each handle end cap is sold individually. Inspect the right-side cap in case it needs to be replaced as well, as they tend to wear out at the same time.
Installation Instructions
Gary from SAUTEE, GA
Installed caps on broken lower handle
Unscrewed broken caps and installed new ones
This is the end cap for the freezer door of various Samsung refrigerators. This end cap is made of plastic and features a brushed-metal finish, and simply snaps on or off the end of the freezer door handle. If your freezer door handle is missing its end caps, or if they are damaged, they should be replaced to give your door handle a more finished appearance. Most handles require two end caps, so be sure to consider how many end caps you require before ordering.
This is the end cap for the freezer door of various Samsung refrigerators. This end cap is made of plastic and features a brushed-metal finish, and simply snaps on or off the end of the freezer door handle. If your freezer door handle is missing its end caps, or if they are damaged, they should be replaced to give your door handle a more finished appearance. Most handles require two end caps, so be sure to consider how many end caps you require before ordering.
This handle support reinforces and stabilizes the appliance door handle, ensuring a secure grip during opening and closing. Designed to replace cracked or damaged supports, it helps restore proper handle alignment and dependable daily use.
This handle support reinforces and stabilizes the appliance door handle, ensuring a secure grip during opening and closing. Designed to replace cracked or damaged supports, it helps restore proper handle alignment and dependable daily use.
Installation Instructions
James from PALM DESERT, CA
Door handle pulled away from door due to broken plastic strip.
Received package, cut open. Removed broken handle. Unscrewed broken support. Support slid right out. Took off end piece. Added end pieces to each new support. Slid new support into place. Re-set screw. Re-attached handle. Couldn’t believe it was so easy!
