Roper Dryer Switches | Replacement Parts & Accessories | PartSelect
Quick Question!

Have you ever purchased from PartSelect.com before?

Popular Roper Dryer Switches

Your Price
$20.55
Door Switch - 3 Wire
PartSelect Number PS11741701
Manufacturer Part Number WP3406107
A door switch is a simple on/off switch mechanism that prohibits the dryer from operating when the door is open. This part may need to be replaced if you find that the dryer is not starting, will not shut off, or the door will not close properly. All you need for this repair is a putty knife and a Phillips screwdriver. Pry open the top of the dryer, remove the two screws underneath the lint collector without removing the entire thing, unplug the switch, remove the screws that hold the switch place, take out the old switch, and install the new one by screwing it back into place.
Fixes these symptoms
Door won’t close
No heat or not enough heat
Shuts off too soon

See more...
Installation Instructions
pat from lisbon,, OH says,

door switch was bad
i was able to go on line with your company , find my dryer, order the part and had it the next day. fast , great , service...read more

Your Price
$20.13
Door Switch Assembly
PartSelect Number PS11741700
Manufacturer Part Number WP3406105
A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.
Fixes these symptoms
Will not shut off
Will Not Start


Installation Instructions
John from Bethesda, MD says,

Dryer would stay on after opening the Door. The switch that turns off the dryer when you open the door was not broken.
You open up the lint filter access door and remove the two small screws that hold it to the top of the dryer. Once they are removed, you insert a flat blade screwdriver under front-top of the unit an...read more

Your Price
$19.29
Switch, Push-To-Start
PartSelect Number PS11742178
Manufacturer Part Number WP3977456
This push-to-start switch activates the dryer when the button is pressed and released. If your switch is not turning on or off, will not start, or the contacts inside the switch are shorted out, it is best to replace this part as a possible solution. Remember to unplug your appliance before beginning the installation process, as safety precaution. For installation instructions and accurate guidance, refer to the diagram provided by the manufacturer.
Fixes these symptoms
Will Not Start


Installation Instructions
Dennis from Port Orchard, WA says,

Broke start switch while moving
Turned off the power.Pulled the dryer out, removed the screws from the control cover panel, unplugged the switch, pressed the release clip the did the opposite to install new switch. Replaced the back...read more

Your Price
$27.16
Lid Switch
PartSelect Number PS11723153
Manufacturer Part Number W10820036
This 3 prong lid switch is used for washing machines that do not have a tub light.
Fixes these symptoms
Pumps but will not spin
Timer will not advance
Will not agitate

See more...
Installation Instructions
Peter from Westbury, NY says,

washer would not start
To see if the lid switch was the problem I first jumped it out and tried to start the washer. That was the problem. I removed the main controll so I could get to the lid switch. I made the mistake of ...read more

Your Price
$41.41
Switch, Push-To-Start
PartSelect Number PS11741493
Manufacturer Part Number WP3398095
This part is used to start the dryer once you have selected a setting on the timer.
Fixes these symptoms
Will Not Start


Installation Instructions
Vincent from Pipersville, PA says,

defective switch
unplug dryer
pull off switch knob
remove two screws at corners of control unit
pull unit toward you to remove
flip over and remove panel
unscrew switch then twist switch to r...read more

Your Price
$22.10
Push-To-Start Switch - 2 Terminal
PartSelect Number PS11741476
Manufacturer Part Number WP3395382
This part is used to start the dryer once you have selected a setting on the timer.
Fixes these symptoms
Will not shut off
Will Not Start


Installation Instructions
Donald from Kanona, NY says,

Dryer would run without pushing the Start Button
Turn off the circuit breaker ( Or remove the Fuse/s )to the dryer,

Removed 2 screws that hold the control cluster to the dryer top. Then I slid the control cluster forward and up to releas...read more

Your Price
$54.91
Push-to-Start Switch Kit
PartSelect Number PS334156
Manufacturer Part Number 279173
This includes the switch, brackets and hardware.
Fixes these symptoms
Will Not Start


Installation Instructions
Luis from VALDOSTA, GA says,

The dryer start but it did not stay on.
I replaced the push start buttom,but it still had the same problem,so I went to the motor and found the burnt wire and bingo,we are happy again thanks to your website....read more

Your Price
$18.13
SWITCH-PTS
PartSelect Number PS11754549
Manufacturer Part Number WPW10420741
Fixes these symptoms
Will Not Start


Your Price
$32.51
SWITCH-DOR
PartSelect Number PS11750824
Manufacturer Part Number WPW10237959
Fixes these symptoms
Will Not Start


Installation Instructions
Ronald from LANCASTER, CA says,

A piece of cloting snagged and broke the door switch.
Repair job took less than 10 minutes: 1) Unplug Dryer 2) Remove Lint screen and 2 Phillip screws 3) use flat putty knife to depress lid latches while lifting (latches located approx 2 - 3 inches from ...read more

Your Price
$41.41
Push-to-Start Switch
PartSelect Number PS11741492
Manufacturer Part Number WP3398094
Also called a Relay.
Fixes these symptoms
Will Not Start


Installation Instructions
Clarence from Davison, MI says,

Dryer would not start.
Hard part was to figure out which part was bad. Checked out all thermo OL and fuses. The start button was only thing left. To change, take off back cover. Pull off knob from front. Pull off wire ...read more