RCA Refrigerator Doors

RCA Appliance Parts
Shop By Part Type

Popular RCA Refrigerator Doors

Your Price
$25.29
  In Stock
Retainer Bar End Cap - Left or Right Side
★★★★★
★★★★★
(8)
PartSelect Number PS299562
Manufacturer Part Number WR2X9144
Sold individually.
Installation Instructions
rose from cleveland, OH
the little plastic thingy's were broken
I took the broken part off the bar, put the new part on the bar, snapped it into the fridge, threw the old part out, opened the fridge admired my work, while I was ther I grabbed a beer....couldnt have gone better. Read more...
Your Price
$20.00
  In Stock
Door Closing Cam
★★★★★
★★★★★
(15)
PartSelect Number PS297995
Manufacturer Part Number WR2X4901
This single door closure cam is mounted on the door, not the hinge.
Fixes these symptoms
  • Door Sweating
  • Door won’t open or close
  • Fridge runs too long
  • See more...
Installation Instructions
Gary from North eastham, AL
Door would not automatically close.
Symptom: Door did not close automatically. Also had found small chunks of black plastic on the floor. Refrigerator door was slightly lower than the freezer door.

One false start because I did not realize both of the door-closing cams had disintegrated and I had only ordered the cam without the hinge.

Purchased part 290199 Hinge Assembly. It came with matching door-closing cam. (Had not known so I also purchased the cam 297995 separately). Next time I will know to only purchase the Hinge Assembly.

Replacement procedure took about 20 minutes including removing and replacing door shelves and their contents. Two people involved.

1. Remove all door shelves with contents and other contents on door.

2. Remove the top Phillips head screw holding the decorative plastic on the top.

3. Remove the two top hinge screws on top of refrigerator using metric #8 socket wrench. Second person made sure door did not fall off.

4. Lift the door off the bottom hinge pin. Second person holds door on it’s side.

5. Take off the bottom refrigerator cover

6. Remove the bottom hinge assembly screws using metric #8 socket wrench.

7. Mount the replacement bottom hinge assembly and tighten the two screws.

8. On the door bottom, remove the outer screw and loosen the inner screw using metric #8 socket wrench.

9. Replace the door-closing cam (or what is left of it) with the cam in line with the door and cam bumps away from the door.

10. Place the door back on the hinge pin (one person holds while the other person maneuvers the door bottom).

11. Replace the top hinge and reinsert the screws on top of the refrigerator. Dress the door so that it does not press hard on the rubber door gaskets (or the door will fail to shut automatically). Tighten the screws.

12. Replace the decorative plastic over the top hinge.

13. Open the door and replace the bottom refrigerator cover.

14. Replace the door shelves and all contents.

15 Close the door.
Read more...
Your Price
$15.45
  In Stock
Door Shelf Retainer Bar End Cap
★★★★★
★★★★★
(4)
PartSelect Number PS299579
Manufacturer Part Number WR2X9162
This is a replacement shelf bar end cap. The end cap connects to the shelf bar on either side, and then snaps into position on the freezer door. This will allow you to store items in the freezer door. It is a little more than 2 inches long and is made of white plastic. To replace the end cap, you can simply depress the locking tab and remove the entire bar and end cap assembly. Then, use a flat blade screwdriver to depress the locking tab, and the endcap will detach. Finally, snap the new end cap locking tabs into place, and snap the bar assembly back onto the freezer door. This product is sold individually.
Installation Instructions
Bushnell from Gulf Shores, AL
Bar end cap broke
Easy fix - snapped together. Read more...
Your Price
$10.57
  In Stock
Door Shelf End Cap
★★★★★
★★★★★
(8)
PartSelect Number PS298590
Manufacturer Part Number WR2X7674
Sold individually.
Installation Instructions
Charles from St. Augustine, FL
end caps broke causing brace to come out
This was a very easy repair. It did not require any tools.

The thing I appreciate most about "PartSelect" is that they included pictures. Had it not been for the picture I would have chosen the wrong part. That is, there were two types of the part I wanted which looked very similar except on close inspection.
Read more...
Your Price
$26.79
  In Stock
Door Shelf Retainer Bar End Cap - Left or Right Side
★★★★★
★★★★★
(3)
PartSelect Number PS298758
Manufacturer Part Number WR2X7975
This end cap can be used for the right or left side of the refrigerator door shelf or the freezer door shelf.
Installation Instructions
Joyce from Flint, MI
freezer door guard broken off
I placed the new part on the end of the freezer door guard and firmly pushed it in until it 'clicked'. Easy as pie! The more difficult part was to remove the broken off part inside the opening of the freezer door hwere the new bar end was to be inserted. I finally used thin nose pliers to reach in and grab the broken off part. Read more...
Your Price
$121.77
  In Stock
Fresh Food Door Gasket
★★★★★
★★★★★
(2)
PartSelect Number PS296969
Manufacturer Part Number WR24X446
This white fresh food door gasket used to seal the refrigerator door when closed.
Fixes these symptoms
  • Door Sweating
  • Fridge runs too long
  • Fridge too warm
  • See more...
Installation Instructions
Michael from Bradenton, FL
ice maker not working properly and door seal worn
Two screws held the icemaker on. You do not even have to take them all the way out to remove the IM. Replacement of the water valve was just as easy except they (parts manufacturer) updated the flange nut with a compression fitting and it took me a minute looking at it before I realize what was going on. The door seal could not be easier, no tools just a few minutes of time Read more...
Your Price
$10.82
  In Stock
Door Hinge Shim
★★★★★
★★★★★
(1)
PartSelect Number PS298522
Manufacturer Part Number WR2X7491
This is the replacement door hinge shim, or riser cam shim for your refrigerator. It is made of metal and is approximately 2 inches in length, and 1 inch in width. Your refrigerator will have a door hinge shim on each door, and each shim is sold individually. The door hinge shim will have three holes in it; one larger hole, and two smaller ones. The door hinge shim is found on the bottom of your refrigerator door, and the main reason for replacing it is if it is torn or damaged. When you are completing this repair, the door will be briefly unsupported. As a result, it is recommended to remove everything from the door to make it as light as possible, and to ensure that the items in the door don’t fall out. This is an OEM part from the manufacturer.
Fixes these symptoms
Installation Instructions
Larry from Clinton, SC
The refrigerator door side of the side-by-side refrigerator/freezer, bottom cams that auto close the door were broken.
First, I removed all items on the door shelves and the shelves themselves to reduce the weight of the door. Second, I removed the cover on the top hinge assembly and removed the two screws that secured that hinge. Third I lifted the door from the bottom hinge assembly and placed the door horizontal on the kitchen table to all easier access to the bottom of the door. I then removed two screws holding the door closing cam and shim and replaced them with the new parts. Next was to removed the old hinge assembly on the refrigerator itself and replace it with a new hinge assembly. All down hill from this point. Time to reinstall the door, aligning the bottom of the door cam over the hinge assembly and setting the door down on it making sure the door sets on the hinge assembly cams. To the top of the refrigerator. reinstalled the top door hinge assembly and cover, job complete. Total time from start to finish including cleaning the inside of the door and shelves about 30 minutes.

As for the replacing of the light lens in the freezer section. This was almost to easy. I removed the ice drawer from the freezer which exposed the one phillips screw that holds the lens in place. Removed the screw and what was left of the old lens, inserted the new lens from the underneath the ice drawer compartment and screw, replaced the ice drawer and, the task was complete. Total time about 5 minutes.
Read more...
Your Price
$41.64
  In Stock
Ice Storage Door
★★★★★
★★★★★
(5)
PartSelect Number PS291480
Manufacturer Part Number WR17X10275
This is a decorative front cover that is made of plastic that covers the opening to where the icemaker is located and disables contact by the user while the icemaker is engaged.
Installation Instructions
Ralph from Pagosa Springs, CO
Door wouldn't stay closed; fridge alarm went off constantly
I removed the door from the fridge by taking off the screws that held the top plate on. I then removed the old broken cam from the door and the old hinge pin on the fridge and replaced them with new parts. I then put the door back on, screwed the top plate of the door into the top of the fridge, and with a few minor alignment adjustments with the freezer door, I was done. Read more...
Your Price
$5.25
  In Stock
Door Shim Cam
PartSelect Number PS297890
Manufacturer Part Number WR2X4540
Sold individually.
Fixes these symptoms
Installation Instructions
George from Harrisburg, PA
door hinge shims worn out
The PartSelect web site was able to direct me right to my GE double door frig using the model number. I called in to order the parts that were worn out with some operator assistance finding out all parts were available to my surprise. I received the parts in just a few days. I blocked the door up with some scrap lumber allowing me to take the old hinge off being careful to watch where the old parts were located. I reassembled the new hinge. It all took about 30 minutes and about $40. If I would have called a service repairman it would have easily cost me $100 and with a lot less satisfaction. This is the second time I have used PartSelect with similar results. Read more...
Your Price
$34.29
  In Stock
Ice Storage Door
★★★★★
★★★★★
(1)
PartSelect Number PS291478
Manufacturer Part Number WR17X10273

Related Parts