Powermate Parts

This forward control cable, compatible with various tiller models, enables forward movement when pulled by the user, engaging the forward gear. Measuring 1440mm (approximately 57 inches) in length, this control cable is equipped with a protective sheath to guard against external damage. It is an OEM part and is sold independently, without any additional securing hardware or parts. If your tiller control cable displays extensive wear, fraying, corrosion, or fails to engage the tiller correctly, it is essential to replace it promptly for optimal tiller functionality. To replace the control cable, you will need a wrench and/or screwdriver. Begin by turning off the tiller and locating the control cable near the handle. Disengage it by unscrewing and disconnecting it from the handle. Follow the cable to the engine transmission, typically held on a clip, and disconnect it. Install the new cable to the tiller handle and the engine transmission, ensuring it engages the transmission when pulled from the handle, and then test for functionality.

This extension control cable is designed to restore reverse functionality in outdoor power equipment such as tillers and mowers. Measuring 1430mm in length, it serves as a direct replacement for malfunctioning or worn cables, ensuring reliable performance and smooth operation. Manufactured to OEM specifications, it offers compatibility with select Powermate and Southland models. The cable is engineered for durability and ease of installation, helping maintain the equipment’s operational integrity and responsiveness during use.

This recoil starter assembly is supplied by the original manufacturer for use in tillers. It includes a plastic starter housing, metal mounting plate, starter pulley with recoil springs, grip handle, pull rope, and fasteners. When the starter rope/cord is pulled, the crankshaft rotates, and this begins the combustion process that allows the engine to run. If the starter assembly is not engaging or you have difficulties with pulling and retracting the rope rope, the most likely causes are a worn-down rope, damaged housing, or broken recoil spring. Loosen and remove the fasteners that hold the assembly to the engine. Pull off the assembly and position the new one in its place. Secure the assembly to the engine and test your equipment by pulling the rope to check that it can engage and start the equipment.

Kit, Internal Filter, Pre-Filter

Genuine Manufacturer Sourced replacement part designed to fit some Craftsman Air Compressors. This part is made out of Plastic and it is Sold Individually. This part connects to the Crank Case Cover securing the oil inside.

This forward drive belt is a genuine replacement component designed to restore smooth and reliable operation to compatible tillers. Known as a 7PK597 multi-rib poly V belt, it connects the engine to the drive system, enabling forward motion and traction. Made from durable rubber, it resists wear and slippage, ensuring consistent performance in demanding outdoor conditions. If your tiller is experiencing reduced traction, slipping, or a non-functioning drive system, replacing the belt may resolve these issues. Installation involves accessing the drive assembly and securing the new belt in place. This part is compatible with select Powermate and Southland tiller models—verify fit before installation.

This is a genuine OEM sourced replacement valve kit designed for use with Powermate equipment. The purpose of the valve plate is to allow air into the cylinder. Once the piston starts traveling up the reeds on the valve plate open and the air is sent into the tank. Over time valves and gaskets will become worn and would need to be replaced to keep your equipment running well. To complete this repair you would need a wrench set and a screwdriver to take off the housing and the cylinder head. Keep in mind this high-quality valve plate assembly is made of durable metal and is sold as an individual component.

This air filter element is designed for small outdoor power equipment to keep dust and debris out of the engine for smooth, reliable operation. By maintaining clean airflow to the carburetor, it helps support consistent performance and protect internal engine components. It’s a simple, effective replacement for routine maintenance in tough operating conditions.

This is a genuine Powermate replacement part, it is sold individually. It is used on the Generators shown below. The purpose of the 0047774 Rubber Foot, is it to keep the unit stabilized when it is running. And also to keep the frame off of the ground and damaging it.