PEA4381 Powermate Edger - Overview

This fuel tank is designed for use within various models of augers, where it supplies the engine with the fuel it needs to operate. This fuel tank is a part directly from the original equipment manufacturer and is sold individually without any extra hardware or parts, such as the fuel cap, fuel lines, or fuel grommet. Fuel tanks can break...Read more down over time and through exposure to fuel, heat, and general wear and tear, and will need replacing when they become damaged, clogged, or contaminated. This fuel tank attaches to the side of the auger and requires a mounting bracket and screws to secure it in place. To replace this fuel tank, you will need to disconnect the fuel lines, securing screws, and brackets from the tank before you can replace it and secure the new tank.

This OEM spring attaches the auger bit of your machine to the drive system. It not only provides tension and flexibility but also absorbs shocks, ensuring your safety and protecting the equipment when encountering obstructions. Replace the spring if you notice signs like a lack of resistance or excessive vibration. Otherwise, your auger m...Read moreay struggle to dig through the material and may experience increased wear and stress. To remove the spring, you need a wrench. Turn off the machine, remove the spark plug boot, and unthread the bolt connecting the auger bit adapter to the output shaft. Then, unthread the top bolt of the spring and remove the hairpin securing the bottom before pulling it out. Note that this replacement part does not include hardware.

This blade is an OEM part sourced directly from the manufacturer for use in earth augers. It is a cutting attachment made of metal, measuring approximately 3.7 inches by 2 inches. It is found at the end of the auger assembly where it is responsible for cutting into the ground. It is normal for the blade to wear down and become dull. A dul...Read morel blade will not be able to cut through the soil effectively, leading to slower performance and decreased precision. The blade may also bend or break if it accidentally impacts hard objects. This presents a safety risk as the blade may dislodge while in use. Remove the fasteners which hold the old blade in place and pull off the blade. You may need to detach the auger bit to access the blade. Align the new blade with the auger shaft and secure it in position.

This is a genuine manufacturer-approved part that is specially made for use with Southland and Airstream handheld lawn and garden equipment. It is designed to keep the fuel in the tank, unfortunately, over time it may wear out and begin to fail eventually requiring a replacement. It includes a retainer that remains in the tank to keep the...Read more fuel cap from being lost or falling on the ground. Keep in mind it is made of high-quality plastic and is sold individually. Please make sure to check the appropriate diagrams of your model for the correct location and application of this part.

A genuine item which is supplied by the original equipment manufacturer for use with Southland lawn and garden equipment. It is a high-quality gasket that helps to provide an air-tight seal for the carburetor, please refer to the appropriate diagram of your model for the correct location and application of this item. Over time the materia...Read morel may wear out and begin to crack eventually requiring a replacement. Keep in mind this high-quality component is made of durable composite material and is sold individually.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Southland earth augers. The purpose of a carburetor is to mix the air and gas before the combustible mix goes to the engine, over time components may wear out and begin to fail eventually requiring a replacement. Keep in mind this high-quality metal body carburetor is sold individually.

This genuine manufacturer-sourced part is specially designed for Southland earth augers. It is an important component which provides a tight seal for the carburetor. Unfortunately, over time it will wear out or it may get lost eventually requiring a replacement. To ensure the correct repair procedure, refer to the appropriate diagrams for...Read more your model. Note, this high-quality isolator is made of durable material and is sold as an individual item. A wrench set will be needed to perform this repair.

This is an authentic OEM sourced replacement recoil starter which is specially designed for use with Southland earth augers. It is the mechanism which allows a user to pull-start the engine. It os a complete set which is sold individually, it includes the durable plastic housing, the starter pulley, the starter spring, and the pull rope with the grip, please note the hardware to secure it is sold separately.

This is a genuine Southland replacement part. The air filter assembly is designed by the manufacturer for use in earth augers. This part is made of high-quality plastic, and is used to remove dust and debris from the air as it passes into the carburetor. You may require a screwdriver or Allen wrench when replacing this item. This part is sold individually.

It is a genuine manufacturer-supplied item that is made for use with Southland earth augers. Gaskets are commonly utilized to provide a tight seal between connected components. This is the special item that connects to the carburetor isolator. Unfortunately, over time the material will wear out and it may begin to crack eventually requiri...Read moreng a replacement. Check the diagrams for your model to ensure the correct repair procedure.