EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖
Sign In | Create Account
| Your Account

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos
Keep typing for more specific results...

Parts Departments

Top Model Types View All

Expert Repair Videos

Symptoms

Troubleshoot like a pro using your model's symptoms

View symptoms

Model Number Locator

Find your model number to unlock guaranteed fit

Find my model number

Articles & Guides

How to Fix a Samsung Dryer 3C Error Code - PartSelect

If a Samsung dryer is displaying a 3C error code, there is a communication issue with the motor and control board. In this article we’ll cover how to fix this issue.

How to Reset Your Bosch Dishwasher - PartSelect.com

A step-by-step guide to resetting a Bosch dishwasher. Learn what errors and issues a reset can fix, how to do a soft reset, and how to do a hard reset.

How to Fix an F11 Code on a Frigidaire Oven - PartSelect.com

Learn how to clear the F11 error code on your Frigidaire oven and replace the keypad overlay and electronic control board with our easy DIY how-to guide.

 See more articles & guides

Terminal Block Kit 134101400

Official part for Frigidaire, Kenmore, Gibson, Kelvinator

★★★★★
★★★★★
(2)

Easy 

30 - 60 mins 

419369-1-M-Frigidaire-134101400 -Terminal Block Kit
419369-1-S-Frigidaire-134101400 -Terminal Block Kit 360 view
( Grid squares measure 1x1 inch )
419369-1-S-Frigidaire-134101400 -Terminal Block Kit
419369-2-S-Frigidaire-134101400 -Terminal Block Kit
419369-3-S-Frigidaire-134101400 -Terminal Block Kit
419369-1-S-Frigidaire-134101400 -Terminal Block Kit 360 view
Part Location Diagram of 134101400 Frigidaire Terminal Block Kit
✖
✖
Part Location Diagram of 134101400 Frigidaire Terminal Block Kit
Price Match
OEM badge Official OEM Part
$59.35
In Stock
Order now and your part arrives by Aug 20

Part Fit Check - Make Sure it's a Match.

Where to find your model number

About This Part

What it does. Why it matters. Everything you need to know for an easy fix.

Terminal Block Kit Specifications

This kit includes 3 screws and 3 terminals.
Part #134101400
Manufactured by Frigidaire for Frigidaire, Kenmore, Gibson, Kelvinator

You May Also Need

Because heroes deserve fewer surprise re-installs.

$20.36
Special Order
$22.52
In Stock
$28.42
In Stock
$18.22
On Order
$27.36
In Stock
$31.58
In Stock

Genuine OEM: Original Parts. Lasting Repairs.

Because quality isn't optional.

OEM stands for Original Equipment Manufacturer. This means that the company who made your appliance is also supplying the replacement part.

How Buying OEM Parts Can Save You Time and Money
Features OEM Generic
Genuine brand name
Guaranteed to fit
Superior Quality
Long term value

About this fix

Common problems and models this part fixes.

Easy 

30 - 60 mins 

Rated by verified customers

Works with the following products:
  • Dryer
  • Washer Dryer Combo
Part# 134101400 replaces these:
AP2108156, 916788, 08027445, 3281025, 5303208585, 5303272121, 5303937016, 8027445, Q000633751, WQ633751

Customer Reviews

Real ratings from other people who bought this part.

Average Rating:

★★★★★
★★★★★
2 Reviews
4.5

Out of 5

  • 5 Stars
    1
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0

Search reviews left by others. DIY doesn't mean you have to do it alone. Use simple keywords like "fit", "broken", "easy", or "quality" to find reviews that match!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Deanna B - January 14, 2019
  Verified Purchase
Part for clothes dryer was exactly what was needed
Excellent condition and I'm definitely satisfied and will order any future parts we need. Happy to be able to dry my laundry again after searching and searching for what I needed. Thanks again
★★★★★
★★★★★
Douglas C - December 23, 2019
  Verified Purchase
The part was just what i needed.
The part came in very quickly. I was able to install it fairly easy dryer is back in good operating condition.
  • 1

Repair Tips

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!

Easy 

30 - 60 mins 

Average repair rating from 4 real customers like you

Sort by:
  • 1

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sorry, we couldn't find any existing installation instruction that matched.
Missing power cable cover/damaged terminal block
9 of 14 people found this instruction helpful.
  • Glenn from Universal City, TX
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Screw drivers
While changing power cable from 3 prong to 4 prong connection on a recently purchased used dryer I found the terminal block partially melted due to improper connectors which overheated. The bracket and cover were also missing which presented a shock hazard for anyone touching the exposed connections and there was no way to connect the strain relief. I disconnected the old 3 prong cable, removed the old terminal block, installed the new terminal block (required opening the dryer top for access), threaded power cable through bracket and fastened with strain relief leaving loose, attached the neutral/ground wires to middle terminal connection point, red to red wire in terminal block and black to black wire also in terminal block and tightened bracket and added cover.
Read less
Was this helpful?
Thank you for voting!
Terminal block, and wires were dammaged/melted
7 of 9 people found this instruction helpful.
  • Edwin from Eagar, AZ
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
Used nut driver to remove screw and cover from dryer cord terminal block, used screw driver to remove two screws securing old terminal block, cut dammaged wire and stripped wire back and crimped on new terminal connecter, replaced old terminal block with new one, replaced two screws, installed new cord, and replaced cover plate and screw.
Was this helpful?
Thank you for voting!
Burning odor, melted terminal block
12 of 13 people found this instruction helpful.
  • DAVID from DURHAM, NC
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
0) Turned off breaker at panel and disconnected power cord from 240v wall outlet
1) Removed screws that hold electrical cover plate on back of dryer.
2) Lifted the top of dryer using putty knife on 2 top edges of lid. This lifts up like a cars hood.
3) Removed the screws that attach the power cord to the terminal block and disconnected power cord
4) Removed screws that attach terminal block to dryer
5) Removed melted terminals by prying out of terminal block. Note metal lip on terminal has to be lifted in order to slide connector out. Also unscrewed ground wire from terminal block to dryer.
6) Drew diagram of what color wires go to what terminals
7) Cut terminals off of wires and connected new terminals. Crimped closed and used butane solder torch to solder connection between terminal and wire
8) Reconnected terminals to terminal block by sliding in. **Note, had to file down the edges of the terminals using moto-tool to make it fit as they are connected together using break-away tabs that leave a large piece of metal connected not allowing to fit in terminal block
9) Reconnected terminal block to dryer and reconnected ground wire.
10) Reconnected power cord to terminal block with screws
11) Replaced cover over wiring terminal block
12) Reconnected power cored to 240ac wall outlet
13) Turned breaker back on
Read less
Was this helpful?
Thank you for voting!
Terminal Block Melts when power cord connector is left loose by install crew.
47 of 67 people found this instruction helpful.
  • Arthur from Grand Prairie, TX
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers, Socket set
1) Removed Top Dryer Cover (pushed 2 compression clips on front side 1" from top and 2" in from each side) to gain access to terminal block in rear.
2) Removed 2 screws over terminal block cover and 2 screws holding bad terminal block in place. Removed 3 screws holding bad power cord,
3) Removed good terminal connectors from bad terminal block and reinstalled them in the new terminal block.
4) Cut dryer wire from bad terminal block connector and soldered (optional) them to the new terminal block connector. Installed this connector into the new terminal block.
5) Installed new terminal block in dryer with 2 screws.
6) Installed new power cord on new terminal block ensuring contacts were tight and cord had pull guard properly installed. Reinstalled terminal block cover with 2 screws.
7) Reinstalled Dryer Top Cover.
Read less
Was this helpful?
Thank you for voting!
  • 1

DIY Questions and Expert Answers

Be the first to ask our experts a question about this part!

This Part Also Fits These Models

Don't see your model? Use our Fit Checker to confirm!

Check Part Fit
Part #134101400
Brand
Model Number
Description
Frigidaire
41749022890
Dryer - Residential, Electric
Kenmore
41761712510
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41761712511
Washer Dryer Combo - Kenmore 41761712511 Laundry Center
Kenmore
41761722510
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41761722511
Washer Dryer Combo - Laundry Center
Kenmore
41761723510
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41761723511
Washer Dryer Combo - Laundry Center
Kenmore
41764182300
Dryer
Kenmore
41769042990
Dryer
Kenmore
41769042991
Dryer
Kenmore
41769052990
Dryer
Kenmore
41769052991
Dryer
Kenmore
41780032990
Dryer
Kenmore
41780042990
Dryer
Kenmore
41780042991
Dryer
Kenmore
4178005291
Dryer - Kenmore Dryer Model 417.8005291 (4178005291, 417 8005291) Parts
Kenmore
41780052990
Dryer
Kenmore
41780052991
Dryer
Kenmore
41780142000
Dryer
Kenmore
41780412700
Dryer
Kenmore
41781042000
Dryer
Kenmore
41781042001
Dryer
Kenmore
41781052000
Dryer
Kenmore
41781052001
Dryer
Kenmore
41781142000
Dryer
Kenmore
41781142001
Dryer
Kenmore
41782042100
Dryer
Kenmore
41782042101
Dryer
Kenmore
41782042102
Dryer
Kenmore
41782052100
Dryer
Terminal Block Kit
$59.35
In Stock
✖
Stock Status

In Stock

Item is in stock and is estimated to be delivered in 2-3 business days via Standard Shipping.

On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.