What it does. Why it matters. Everything you need to know for an easy fix.
Direct Drive Motor Coupling Specifications
This direct drive motor coupling (Direct Drive Washer Motor Coupling, Motor Coupling, Washer Motor Coupling, Coupling Kit) provides a cushioned connection between the transmission and the motor shaft. It attaches to the direct-drive transmission and the motor shaft. If this part is defective it will affect the agitator in your washer because of its direct connection with the motor. Your washer may not agitate, spin slowly, or not spin at all. The coupling must be replaced when there is no longer a consistent connection between the transmission and the motor shaft. The coupling can wear over time because of its location between two major parts of the dryer. It is subject to material fatigue over time from normal use, or breakage caused by frequent overloading. The part measures approximately 2 inches in diameter, and is constructed of plastic and metal. This model comes in black/white.
Part #285753A
Manufactured by
Whirlpool
for Whirlpool, Kenmore, KitchenAid, Roper
Real ratings from other people who bought this part.
Average Rating:
★★★★★
★★★★★
169 Reviews
4.7
Out of 5
5 Stars
135
4 Stars
26
3 Stars
5
2 Stars
1
1 Star
2
Search reviews left by others. DIY doesn't mean you have to do it alone. Use simple keywords like "fit", "broken", "easy", or "quality" to find reviews that match!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
3
Next
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Thomas T - June 5, 2018
Verified Purchase
Easy Repair
The repair went well. The video from this site was very accurate. It was a little difficult to get it the new coupling onto the transmission shaft because of extreme corrosion on the old shaft. After a little work with a file I was able to get it to go on. The machine now sounds like new.
★★★★★
★★★★★
AMY B - June 22, 2018
Verified Purchase
Super fast and easy
The parts were exactly what was needed and the repair was quick and simple.
★★★★★
★★★★★
Debra P - June 12, 2018
Verified Purchase
I ordered the right part
The part was in good condition, and waher is back to working
★★★★★
★★★★★
Scott M - August 22, 2019
Verified Purchase
Repair was e breeze
Part was what I need thank you
★★★★★
★★★★★
Debra B - August 22, 2019
Verified Purchase
Just what we needed!!
We ordered 2 of these just in case it breaks again but the parts worked perfectly, the install instructions were easily followed and we were back in washing business within an hour!!! Thanks you saved us lots of $$$$!!!
★★★★★
★★★★★
Harmon E - December 24, 2019
Verified Purchase
Easy repair.
Part came fast and washer works like new.
★★★★★
★★★★★
George A - September 21, 2021
Verified Purchase
Great part. Fit as described.
Washing machine back working like new.
★★★★★
★★★★★
Jose S - September 10, 2020
Verified Purchase
Easy repair
The part was in great condition, my applianceis now in working condition. Thank you parts select.
★★★★★
★★★★★
Don H - April 16, 2021
Verified Purchase
Easy repair
The part was in good condition and washer is up and running.
★★★★★
★★★★★
Carolyn P - March 19, 2020
Verified Purchase
Washer machine repair
The replacement part was better than the original part. The original part had a plastic piece in the center. I was able to track my package and it arrived on time. I was also sent a link as to how to replace the motor coupling. Good company, would order from them again
Prev
1
2
3
Next
Repair Tips
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
Easy
30 - 60 mins
Average repair rating from 254 real customers like you
Sort by:
Prev
1
2
3
Next
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sorry, we couldn't find any existing installation instruction that matched.
My cloths were very wet after the spin cycle, I needed a new clutch and while I was ordering parts I ordered extra parts that an old machine might need.
1 personfound this instruction helpful.
David from Breckenridge, CO
A Bit Difficult
More than 2 hours
Pliers, Screw drivers, Socket set
this website offers many youtube videos to aid in your repairs. I would personally say that you should take a picture of every part you disassemble and therefore know what you have to do in reverse to complete your job correctly the first time. I kept on having to go back to every step many times because the machine was clicking and I tho
... Read moreught I may have put a part in the wrong way or not seated correctly. I did open a chat on the site platform and communicated with one of their customer service representatives. They printed out many potential problems that would cause this problem. I went through everyone of them again and finally realized that I disconnected a green ground wire on the back of my machine. I reconnected the wire and it worked, like it should. When ordering parts, it may be a good idea to call customer service to ask if multiple parts are needed, so you do not have to order more parts and pay extra for shipping. I needed 3 suspension springs but I only ordered 1. Also to replace other parts, watch the videos as you may need other specialized tools. Once I receive the other tools and parts, I will be able to finish the job. 5 Stars! Thanks for your support! I definitely recommend this Company for your DIY repairs, they make it much easier. Once again take pictures of everything before and after you disassemble every part.
So i replaced the above parts pulled gearbox put new oil in all looked good but when i tryed it filled started spinning for a few sec.then quit again?was makeing a clicking sound so i layed on the floor and the drive coupling was spinning so i took the water pump off and it started agitating and spinning. found about a 6 in.thin piece of
... Read morewire in it, dont know where it came from but installed a new pump and it works like a new one !!!
The washer did not spin fast enough during the rinse cycle to adequately dry the load of clothes
17 of 19 peoplefound this instruction helpful.
Richard from EL SEGUNDO, CA
A Bit Difficult
More than 2 hours
Socket set
I repaired my Kenmore washing machine replacing the clutch, Motor coupling and cogs. All of the parts came quickly and with good instructions. Best of all there were links to youtube repair walkthroughs. With out these step by step instructions this project would have taken much longer. Now the washer is like new! WATCH THE YOUTUBE PAUSE
... Read moreDO THE STEP AND REPEAT
Kenmore 80 Series Washer - Agitator Stopped Working
3 of 3 peoplefound this instruction helpful.
Peter from WRENTHAM, MA
Easy
15 - 30 mins
Socket set
First I screamed at the ceiling, because I have a three year old and an infant, and the washing machine was dead. Then I went to youtube. It seemed like the "agitator dogs" were the issue.
In this spirit of any repair, I replaced them, and it was not the issue. I don't know what I expected.
Ceiling. YouTube. Pacing
... Read more.
Then I figured it was this part - the motor coupling. I unplugged the machine and took out the drain tube. I leaned the machine back and propped it up with an empty detergent bottle, because those were abundant. Ratchet off a few bolts and the motor comes out. The coupling was indeed broken. The new one slips right in - I tapped it a few times with a mallet for good measure / vengeance. Ratcheted the bolts back on and tipped it back up.
Pros: Washer works now. Cons: Everest-esque laundry pile to address.
But hey, it worked! I am no handyman and it wasn't too bad at all. Half hour tops.
will not go over step by step here as there are already a multitude of stories on site with exact situation as mine who have already done so.. What I will say is that PartSelect is easily the absolutely best site on the net for a complete problem diagnosis to finished repair experience. Just input your model # and describe the problem and
... Read more you get instant diagnosis probabilities along with access to a long list of customer Q & A and reviews, along with step by step videos on diagnosing, dis- assembling, and re-assembling along with links to all parts needed and also some secondary tips along the way. The prices are fabulous (example: I got a clutch assembly kit with several parts and 2 additional parts as a just in case for $55 shpg incl, while my local appliance parts place wanted $59 plus tax for just the main part in my assembly kit with a no return policy and no part guarantee, plus it was only 1 day more to have PartSelect pkg arrive than I would have gotten part from local store). This site is FABULOUS !!!
Washer would not Agitate or spin out. Also noticed an oil leak.
14 of 16 peoplefound this instruction helpful.
Jonathan from BRANDON, VT
Really Easy
More than 2 hours
Nutdriver, Pliers, Screw drivers, Socket set
I followed instructions provided from Parts Select for removing and replacing the coupler assembly, and also instructions for changing the clutch assembly. I also took it's transmission apart (socket set and flat screwdriver required), drained the old oil, cleaned it, added new 90W gear oil. The instructions covered the swapping of parts
... Read morevery well. Cleaning up the oil spill took as long as changing the parts.
washer wouldn't spin with load, then not at all with rapid clicking sound
6 of 6 peoplefound this instruction helpful.
Lou from ATLANTIC HLDS, NJ
Easy
1- 2 hours
Pliers, Screw drivers, Socket set
Clutch was noticibly worn compared to new part. Direct drive flange had broken, this part should be steel. found a you tube video that was simple to follow. no problems
Ask our experts a question about this part and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
3
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Maddie
July 20, 2017
When I’m using my washer it is no longer spinning but it is making sounds like it is, and it is still draining normally, what should I do?
Hello Maddie, we recommend that you inspect the motor coupling first. If the motor coupling is faulty, the tub will not spin properly. Please let us know if you have any further questions.
128 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
April - For model number RAB5232EW1
August 28, 2017
My washer fills up normal but will not agitate and makes a sound like a drill also will not drain.
Hello April, thank you for contacting us. It does sound like the direct drive coupling has given out. This direct drive motor coupling, also known as a coupling kit, is a newer version of the part and is used in your washer. The piece includes new metal sleeves that have been added in order to strengthen the part. Hope this helps!
44 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Cleve
July 20, 2017
The basket and the agitator were not working and I diagnosed that I needed to replace the motor coupling. That was a while ago. Now it stopped spinning and the motor coupling seems to still be in good condition, what else should I be looking for?
Hi Cleve, it sounds like you may have a problem with your lid switch. Try closing the lid of your washer, if you hear a clicking sound that is a good indicator that it is working. If you do not hear a clicking sound you most likely need to replace the lid switch. We also recommend checking the lid switch wiring harness connection, as it might have come loose during your motor coupling repair. I hope this helps.
21 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Ronnie
July 20, 2017
My washing machine is acting up and i think it could be the motor coupling or the agitator but would like to confirm. It is spinning during the wash cycle but during the spin cycle it isnt. The basket is spinning good but I think the agitator stopped spinning. Also not sure if it is relevant but the washer seems to be draining normally.
Hi Ronnie, unfortunately it sounds like the transmission is bad and needs replacing. This is the transmission you would need for your model 3360629, best of luck with this repair.
18 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Jason - For model number GSX9885JQ0
August 10, 2017
After wash cycle it starts to spin but not drain the water out. I already replaced the direct drive pump.
Hi Jason,
There is one other part that might be causing your appliance not to drain. The Lid Switch Assembly. If that part fails your appliance will not drain. However you should also check all of your hoses to make sure that nothing is blocking them. That will also not allow your appliance to start to drain. Good luck with your repair!
12 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Stefan - For model number WTW57ESVW1
August 27, 2017
Washer makes a loud banging noise at end of spin cycle until the tub stops spinning
Hi Stefan,
Thank you for the question. Sounds like you need to replace the Center post Bearing and Seal Assembly. This can cause a banging or rubbing noise. I also recommend replacing the Direct Drive Motor Coupling. Both parts are knob to make noise when they wear out and when replacing one of the parts it is recommends to replace both.
Hope this helps!
I changed the the agitator dogs and whole kit but washer still barely agitates and agitator turns easily both ways. Do i need the replace the motor couplings or get a new washer? Repairman wants to charge me $200 to come look at it. There is no belt that i can see. Please help i am a single woman on a tight budget , but very handy your videos have helped me repair dryer already.
Hi Alana,
Thank you for your inquiry. Some other parts that may fix the issue are the agitator, the agitator coupler and cap and bolt, the direct drive motor coupling, the drive belt, the transmission, the drive motor, the timer, the lid switch, the selector switch and the water level switch. To verify if the electrical parts are causing the issue you need to use a multimeter to check the continuity of each part. I hope this helps. Thank you and have a great day!
9 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Shannon - For model number LSR7233BW0
August 25, 2017
Washer makes a high pitch noise while draining water. It spins and dries clothes just fine. The noise is sporadic. Some times it will do it when spinning. Not sure if it's the mortor coupler or the clutch assembly.
Hi Shannon,
Thank you for your question. For a problem like that it sounds as though one of those two parts has either debris causing the noise or they have worn down a bit. I think you should check your clutch assembly first, and then also do a physical check on your coupler as well. Without looking at your appliance myself, I could not say which one it would be exactly because it could be either. Good luck with your repair.
9 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
David - For model number WTW5200VQ2
December 9, 2017
Hi, my washing machine does not agitate. It spins fine and everything seems to work fine. I replaced the agitator repair kit and checked the direct drive motor coupling, but there is no visible damage. Could it be that is just worn out or what other parts might be faulty?
Hello David,
Thanks for your question. We would advise checking the drive block as well for any signs of damage and replacing it if it is not intact.
I hope this helps.
Will this part fix....start a wash cycle, it fills up and agitates for a decent time but then starts spinning but not draining, it's pumping the water back up top into the washer and will continue to do so until you stop the machine
Hello Jason,
Thank you for the question. Sounds like you need to replace the Direct Drive Water Pump. This direct drive water pump, also known as washing machine drain pump. If this part is defective it will not pump the water out of the appliance.
Good luck with this repair!
My Orders
