Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Deborah
January 15, 2018
Will this part fit my washer and do i need a special tool to install ?
For model number LSL9244EQO
Hello Deborah, Thank you for your inquiry. We do show that this part will fit the model number you provided. According to the repair videos we have for similar parts-the centerpost gasket and tub bearing, you should not need any special tools. I have included the links to the videos. Hope this helps!
https://www.youtube.com/watch?v=mVcPR10VLcc
https://www.youtube.com/watch?v=HFXdFMaY_B4
4 people found this helpful.
Was this helpful?
Thank you for voting!
Rick
January 29, 2018
Do you have a video of replacing the tub bearing in a Kenmore top loader?
For model number 11020712990
Hi Rick,
Thank you for your question. There is a video on our website that you can reference on how to install the tub bearing. The washer in the video may not show exactly like the one you have, but it will give you a general idea on how to install the part. You will find the video under part number PS271510. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Roosevelt
January 7, 2018
Will this kit stop water from going into the gearcase.
For model number KAWS777EZ0
Hi Roosevelt, Thank you for the question. Yes the Centerpost Bearing and Seal Assembly should prevent water from leaking into the Gearcase. Good luck with the repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Linda
February 11, 2019
My washer makes loud banging noise when it’s stopping the spin cycle. Everything else works as it should. What needs to be fixed?
For model number 11024872300
Hello Linda, Thank you for contacting us. I suggest inspecting the following parts: PS1485646 Direct Drive Motor Coupling, PS388034 Agitator Directional Cogs, PS334641 Clutch Assembly, and PS11741977 Drive Block - 2 5/16" High. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joan
September 4, 2019
My washer is very noisy during the final spin. What repair do I need?
For model number 11025862400
Hello Joan, Thank you for the question. Noise during the spin cycle can be caused by a defective Gearcase PartSelect Number PS341974 or the Direct Drive Basket Drive Kit with Clutch PartSelect Number PS11723156, but should check for wear on the Centerpost Bearing and Seal Assembly, Centerpost Gasket PartSelect Number PS11723081 and Spin Pinion Seal PartSelect Number PS11741857 as well. Hope this helps!
Hello Charles,
Thank you for contacting us.
This kit is not listed under your model. The bearing and seal for your model are part numbers PS6012095 and PS3407958 respectively.
I hope this helps.
My washer is making a high pitched squeal during the rinse when the tub is spinning. Once you open the lid it goes away immediately but the drum continues to spin noise free for a few seconds. My best guess is to replace the tub bearings would this be a good place to start and would this be the correct part?
For model number 11091250100
Hi Josh, Thank you for the question. Sounds like the noise can be coming from the Drain Pump, PartSelect Number PS11741239. I suggest removing the pump and cleaning it out to see if maybe something has become lodged or damaged and causing the noise. Hope this helps!
Was this helpful?
Thank you for voting!
Michael
July 30, 2018
Will this fit my model and do i need a special tool to replace it?
For model number 92573210
Hi Michael,
Thank you for your question. Yes, this part is listed under your model number and it will work on your appliance. There is a video on our website that you can reference on how to install the tub bearing. The washer in the video may not show exactly like the one you have, but it will give you a general idea on how to install the part. You will find the video under part number PS271510. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Kate
September 13, 2019
Will this kit work with my washer? It is making a very loud noise (freight train) during entire spin cycle.
For model number WTW4816FW
Hello Kate,
Thank you for your question. The correct kit you need is the agitator cam kit for your model under part PS334648. Hope this helps!
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Lowell A K - January 20, 2021
Verified Purchase
Fine parts
The parts were a perfect match and all went well. I had to watch a video on a competitor's website to make sure I was installing the seals correctly. The illustration of the parts plainly shows instructions included. My parts sure didn't have them. I wish I would have ordered spin pinion seal and the upper transmission seal. I still had a small water leak and enough water got into the clutch to cause it to slip and wear prematurely, it was brand new. Now I have to install another one.
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
