EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

TES355VB0 Estate Range - Instructions

All Instructions for the TES355VB0
106 - 120 of 195

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven temperature was 50 degrees off
1 of 2 people found this instruction helpful.
  • Gregory from BRIDGEBORO, GA
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
Unplugged stove.
Pulled stove out.
Unscrewed screws and removed cover.
Removed & replaced sensor.
Reinstalled cover & screws.
Plugged in stove and pushed back in.
Only problem was when I pulled stove out, lid opened and disconnected the gas line to a burner.
Was this helpful?
Thank you for voting!
burned oven bulb
3 of 9 people found this instruction helpful.
  • Ivanka from Atlantra, GA
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
The hardest part was taking out original light bulb because screws on shield where hard to unscrew after all this years . The old bulb vent out leaving neck in socket. It took narrow electrical pliers to get neck out .The generic appliance bulb did not fit and had aluminum neck ,not recommended for brass sockets in ovens.Putting new ligh t bulb in was not the problem.
Was this helpful?
Thank you for voting!
oven light not working
2 of 6 people found this instruction helpful.
  • Richard from Gaylord, MI
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Screw drivers
replaced light socket but did not repair problem. must have burned the motherboard.


pleased with service from your company.
Was this helpful?
Thank you for voting!
Inside Light would not work
2 of 7 people found this instruction helpful.
  • Dan from Caddo Mills, TX
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Turned off CB for the oven,Remove the oven from the cabinet , remove the back of the oven, replaced the light Assembly. turned on CB for the oven, tested the light. and truned off the CB and replace the back and reinstalled the oven in the cabinet.
Was this helpful?
Thank you for voting!
Oven not heating properly
0 of 1 people found this instruction helpful.
  • Matthew from Greenville, OH
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Unplug the oven, pull it out and empty the inside of the oven. The bottom heating element just unscrews from the back of the oven with two screws. Pull it out from the back of the oven and gently pull off the electrical connections. Reattach them to the new heating element, put it back into the oven and reattach the screws. Turn the o ven on and check to make sure that the new heating element is working. Put everything back in the oven and you're done!
Was this helpful?
Thank you for voting!
replaced oven lightbulb
0 of 1 people found this instruction helpful.
  • peggy ann from forest city, NC
  • Really Easy
  • Less than 15 mins
very easy
Was this helpful?
Thank you for voting!
Light burned out in upper oven
0 of 1 people found this instruction helpful.
  • Shirley from Las Vegas, NV
  • Really Easy
  • Less than 15 mins
Screwed in light bulb and glass protector
Was this helpful?
Thank you for voting!
oven light burnt out
3 of 10 people found this instruction helpful.
  • William from Schwenksville, PA
  • Easy
  • Less than 15 mins
1. Unscrewed glass cover on bulb
2. Removed old bulb
3. Screwed in new bulb
4. Replaced glass cover
5. Mixed drink & baked cupcakes
Was this helpful?
Thank you for voting!
door glide broken
0 of 1 people found this instruction helpful.
  • David from Port Orange, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
removed the old ones.then installed the new ones.
Was this helpful?
Thank you for voting!
light bulb went out in my oven
2 of 7 people found this instruction helpful.
  • Janet from Ada, MI
  • Really Easy
  • Less than 15 mins
My husband took the plastic cover off and took out old bulb and screwed in the new one. Then put the cover back on.
Was this helpful?
Thank you for voting!
Bulb Replacement
0 of 2 people found this instruction helpful.
  • Judith from Phoenix, AZ
  • Really Easy
  • Less than 15 mins
I pulled down the wire around the glass cover. . . Released on end of the wire from its holder being careful to not let the glass cover drop. Unscrewed the bulb and replaced with replacement. Easy, easy.
Was this helpful?
Thank you for voting!
Oven gets too hot,if set at 350 it heats to 550. Changed the sensor and was not the problem.
0 of 2 people found this instruction helpful.
  • Joanne from Negaunee, MI
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Took off the screws on the back of the stove and took out the sensor, and put in the new one.
Was this helpful?
Thank you for voting!
water pump went out
2 of 12 people found this instruction helpful.
  • paul from windsor, VA
  • Really Easy
  • Less than 15 mins
  • Pliers
it was very easy i took the pump off only two clips and two hoses holding it type in the model number at parts select it came right up soi new it right one from the picture got with in 3 days put it back on less then 10 mins
Was this helpful?
Thank you for voting!
Both outside door handles turned very beige
23 of 76 people found this instruction helpful.
  • Howard from Boynton Beach, FL
  • Easy
  • 30 - 60 mins
  • Nutdriver
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discol oring refer handles. Thank you
Was this helpful?
Thank you for voting!
Replacing the Upper Spray Arm, part # PS2581378
  • Vittorio from Wakefield, MA
  • Really Easy
  • 15 - 30 mins
The detection of the part and the replacement of the upper spray arm was quite easy, because of its unique shape and function, and also because it was easy to screw in place. I saved the web order page in case this part tends to deteriorate frequently, even though it is the first time it showed this problem since we purchased this applian ce.
Was this helpful?
Thank you for voting!
All Instructions for the TES355VB0
106 - 120 of 195