TES335MB5 Estate Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven Demon Possession
1 person
found this instruction helpful.
-
Kevin from Greensboro, NC
- Really Easy
- Less than 15 mins
Our repair was extrodinarily easy. As my husband was taking out the old element and the oven was off, the element heated up and actually burned him. He readjusted it and it refused to heat again. We figured at that point that there must be a short, so we never even opened the box with the new element. A short time later we decided to use
... Read more
the top of the stove for soup and a small fire started in the oven. We turned off the braker at that point and ordered a new oven.
Read less
Was this helpful?
Thank you for voting!
electrical short from oven light.
2 of 4 people
found this instruction helpful.
-
William H. from morehead city, NC
- A Bit Difficult
- 1- 2 hours
-
Nutdriver, Pliers, Screw drivers
I trouble shot and traced out to electrical short in face panel and found burnt wires. I've been a licensed electrician for years and it takes alot of comon sense to trouble shoot and find problem. I found schetch-matic of appliance and searched computor and found partselect.com and tried it. It wasnt no time and the part was at my door.
... Read more
Thank you partselect and i would use them again in the future. billy
Read less
Was this helpful?
Thank you for voting!
Replacing oven light and socket
1 person
found this instruction helpful.
-
Carol from BELLINGHAM, WA
- A Bit Difficult
- 1- 2 hours
-
Pliers, Screw drivers, Wrench (Adjustable)
The old part, including lightbulb and socket, had corroded into place, and the glass light cover was stuck to the socket. I used a dead blow hammer and a dowel just under the diameter of the hole to tap on the back side of the socket to loosen it and get it out. The metal tabs on the old socket were folded back to make it fit better (?),
... Read more
which made it harder to remove. Lots of muscling of the part to get it out. Easy to install new part once old one was out of the way. An experienced person would have removed the old part and installed the new in no time.
Read less
Was this helpful?
Thank you for voting!
Over heating element.
1 person
found this instruction helpful.
-
carlos from TRACY, CA
- Easy
- 30 - 60 mins
-
Screw drivers
Just turn off power , remover screws. Remove and plug in new part.
Was this helpful?
Thank you for voting!
range would not heat right
1 person
found this instruction helpful.
-
bobby from HERSCHER, IL
- Really Easy
- 30 - 60 mins
-
Screw drivers
very easy watched the howto you gave
Was this helpful?
Thank you for voting!
bake element out
1 person
found this instruction helpful.
-
Joyce from BALLWIN, MO
- Really Easy
- 30 - 60 mins
use needle nose pliers to disconnect the element from the power supply. After disconnecting it was easy to repair.
Was this helpful?
Thank you for voting!
Oven temperature was 50 degrees off
1 of 2 people
found this instruction helpful.
-
Gregory from BRIDGEBORO, GA
- A Bit Difficult
- 30 - 60 mins
-
Screw drivers
Unplugged stove.
Pulled stove out.
Unscrewed screws and removed cover.
Removed & replaced sensor.
Reinstalled cover & screws.
Plugged in stove and pushed back in.
Only problem was when I pulled stove out, lid opened and disconnected the gas line to a burner.
Pulled stove out.
Unscrewed screws and removed cover.
Removed & replaced sensor.
Reinstalled cover & screws.
Plugged in stove and pushed back in.
Only problem was when I pulled stove out, lid opened and disconnected the gas line to a burner.
Was this helpful?
Thank you for voting!
Broiler would not shut off--had to unplug the stove
6 of 17 people
found this instruction helpful.
-
LOIS from ALTA VISTA, KS
- Really Easy
- Less than 15 mins
-
Screw drivers
Just connected the part---very simple to fix
Was this helpful?
Thank you for voting!
broiler pan missing
1 of 2 people
found this instruction helpful.
-
RAYMOND from JACKSONVILLE, FL
- Really Easy
- Less than 15 mins
ordered new broiler pan
Was this helpful?
Thank you for voting!
cleaner
2 of 5 people
found this instruction helpful.
-
Mary from Duarte, CA
- Really Easy
- Less than 15 mins
just needed clearner for the top of my glass top, the operator was very helpful I received my clearniner in 7 days thank you
Was this helpful?
Thank you for voting!
Light would not light
1 of 2 people
found this instruction helpful.
-
Frank from LEBANON, VA
- Easy
- 15 - 30 mins
-
Pliers
Pop old one out and new one in
Was this helpful?
Thank you for voting!
burned oven bulb
3 of 9 people
found this instruction helpful.
-
Ivanka from Atlantra, GA
- Really Easy
- 30 - 60 mins
-
Pliers, Screw drivers
The hardest part was taking out original light bulb because screws on shield where hard to unscrew after all this years . The old bulb vent out leaving neck in socket. It took narrow electrical pliers to get neck out .The generic appliance bulb did not fit and had aluminum neck ,not recommended for brass sockets in ovens.Putting new ligh
... Read more
t bulb in was not the problem.
Read less
Was this helpful?
Thank you for voting!
oven light not working
2 of 6 people
found this instruction helpful.
-
Richard from Gaylord, MI
- A Bit Difficult
- 30 - 60 mins
-
Nutdriver, Screw drivers
replaced light socket but did not repair problem. must have burned the motherboard.
pleased with service from your company.
pleased with service from your company.
Was this helpful?
Thank you for voting!
Inside Light would not work
2 of 7 people
found this instruction helpful.
-
Dan from Caddo Mills, TX
- Really Easy
- 15 - 30 mins
-
Nutdriver
Turned off CB for the oven,Remove the oven from the cabinet , remove the back of the oven, replaced the light Assembly. turned on CB for the oven, tested the light. and truned off the CB and replace the back and reinstalled the oven in the cabinet.
Was this helpful?
Thank you for voting!
replaced oven lightbulb
0 of 1 people
found this instruction helpful.
-
peggy ann from forest city, NC
- Really Easy
- Less than 15 mins
very easy
Was this helpful?
Thank you for voting!