TES335MB5 Estate Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Cooktop on and cooktop hot indicator lights stayed on.
1 person
found this instruction helpful.
-
MICHAEL from FOUNTAIN INN, SC
- Very Easy
- 15 - 30 mins
-
Screw drivers
Range surface element control switch was bad. Replaced the switch and every thing works fine. Removed two Philips head screws in front and two Philips head screws in back of the range. Pulled the front panel away from the back of the range with the power off of course. Unplugged the wires and removed the two screws that held the switch in
... Read more
. Replaced the switch and refastened the control panel. Tested the switch and every thing worked fine.
Read less
Was this helpful?
Thank you for voting!
oven light kept burning out instantly
1 person
found this instruction helpful.
-
David from ENID, OK
- Easy
- 15 - 30 mins
-
Screw drivers
Replaced the oven light with a new one but it burnt out as soon as I turned it on. Therefore I decided a new socket may help.
My whirlpool apparently has the old style socket which is pictured in partselect part #PS12584564. The old style socket has to two metal arms that retain it against the metal reflector.
The ... Read more part that will come (#PS12584564) however is the new style that whirlpool has changed to, apparently. It is not as pictured. The socket and the reflector have different retention devices.
I used screw drivers to bend the two metal arms away to release the socket. Then I had to use allen wrenches to bend the reflector's retention tabs away.
Once I had the old socket, reflector, and lens replaced I just followed the video on partselect for part #PS12584564
My whirlpool apparently has the old style socket which is pictured in partselect part #PS12584564. The old style socket has to two metal arms that retain it against the metal reflector.
The ... Read more part that will come (#PS12584564) however is the new style that whirlpool has changed to, apparently. It is not as pictured. The socket and the reflector have different retention devices.
I used screw drivers to bend the two metal arms away to release the socket. Then I had to use allen wrenches to bend the reflector's retention tabs away.
Once I had the old socket, reflector, and lens replaced I just followed the video on partselect for part #PS12584564
Read less
Was this helpful?
Thank you for voting!
Element temperature inconsistent
1 person
found this instruction helpful.
-
Nathan from WHITE RIV JCT, VT
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Turn off power to the stove (unplug or turn off breaker)
Remove back panel screws (Phillips) and back panel
Unplug switch
Remove knob and attaching screws (Phillips)
Remove and replace switch
Reinstall screws for switch and plugs in the back
Snap off the end of the stem if it's too long and reinstall knob
... Read more />Reinstall back panel and turn power back on
*important: the large element has an updated switch and you may need to snap off the end of the stem with pliers! It's too long and there are no instructions for this included!*
Remove back panel screws (Phillips) and back panel
Unplug switch
Remove knob and attaching screws (Phillips)
Remove and replace switch
Reinstall screws for switch and plugs in the back
Snap off the end of the stem if it's too long and reinstall knob
... Read more />Reinstall back panel and turn power back on
*important: the large element has an updated switch and you may need to snap off the end of the stem with pliers! It's too long and there are no instructions for this included!*
Read less
Was this helpful?
Thank you for voting!
Rear drawer slide was broken.
1 person
found this instruction helpful.
-
David from Mauldin, SC
- Really Easy
- Less than 15 mins
-
Screw drivers
Undid one screw. Removed the broken slide. Replaced with new slide an fastened with the existing screw. Problem solved.
Was this helpful?
Thank you for voting!
Door handle of stove's oven broke. Had problem finding handle until I contacted Select Parts.
1 person
found this instruction helpful.
-
Martha from EDISON, NJ
- Really Easy
- Less than 15 mins
-
Screw drivers
The repair went well. Only took a few minutes. Oven is 21 years old and still working. I figured why throw away if still working. Thank you Select Parts for coming to my rescue. Will keep you in mind.
Other Parts Used:
Was this helpful?
Thank you for voting!
broken rear drawer glides
1 person
found this instruction helpful.
-
Jeff from Manhattan, KS
- Really Easy
- 15 - 30 mins
-
Screw drivers
just replaced the broken glides with the new ones.
Was this helpful?
Thank you for voting!
Removing an heating element that burnt into .
1 person
found this instruction helpful.
-
Jenny from GREENFIELD, IN
- Very Easy
- Less than 15 mins
-
Pliers, Screw drivers
Unplugged oven , removed screws ,pulled wires out, removed old element , just hooked wires up , screws .make sure it sits level plugged in. Works great
Was this helpful?
Thank you for voting!
slides on lower drawer were broken
2 of 4 people
found this instruction helpful.
-
Leona R from Louisville, KY
- Really Easy
- Less than 15 mins
-
Screw drivers
I used a phillips screwdriver and replaced the part with one screw.Very easy and replaced my lower drawer under my oven,it tool about three to five minutes at the most and my drawer works fine now.Thanks for the instruction video on line, it really helped.
Was this helpful?
Thank you for voting!
Broken drawer glide
1 person
found this instruction helpful.
-
karen from Thornton, CO
- Really Easy
- Less than 15 mins
-
Screw drivers
Used a phillips head screwdriver to remove the single screw holding the part in place and put the new one on. Finding the part on this site was a breeze and it arrived quickly. A first rate experience all around.
Was this helpful?
Thank you for voting!
Removed handle on oven door to remove front glass to clean when it slipped out of my hands.
1 person
found this instruction helpful.
-
David from PRESCOTT VLY, AZ
- Really Easy
- Less than 15 mins
-
Screw drivers
To replace, the front glass slides into two holders on the bottom and three groves in the handle, then two screws to attach handle in place on the door.
Was this helpful?
Thank you for voting!
THe original knob found its way into my garbage disposal and was broken. I needed to freplace it.
1 person
found this instruction helpful.
-
ELAINE from SILVER SPRING, MD
- A Bit Difficult
- Less than 15 mins
I decided NOT to crawl under my stove top to find the correct model no. of the unit, as recommended in the Help section of the website. Instead I just guessed. It arrived, and of course didn;t fit. So I crawled under the stove top, got the correct model no., and instantly found the correct part to order. Part Select instantly honored my r
... Read more
equest for a refund on the first part and the correct part is on its way. So I ended up paying two delivery charges instead of one. LESSON LEARNED.
Read less
Was this helpful?
Thank you for voting!
screw came off
1 person
found this instruction helpful.
-
Sandeep from EDINA, MN
- Very Easy
- Less than 15 mins
-
Screw drivers
very expensive to buy the part but just tighten the screw intot eh predefined place.
Was this helpful?
Thank you for voting!
baking element non operational
1 person
found this instruction helpful.
-
GARY from JACKSON, WY
- Really Easy
- Less than 15 mins
-
Screw drivers
removed two screws to faceplate at rear of oven. Disconntected contact wires, installed bake element reconnected contact wires, attached faceplate turned on oven holy hell it works just saved some money on service call thanks!!!
Was this helpful?
Thank you for voting!
Oven Elementwas burnt into
1 person
found this instruction helpful.
-
Fred from APACHE JCT, AZ
- Very Easy
- Less than 15 mins
-
Screw drivers
Watched the video and did as shown
Was this helpful?
Thank you for voting!
Worn/Bulb Socket
2 of 4 people
found this instruction helpful.
-
JOSEPH from COON RAPIDS, MN
- Really Easy
- Less than 15 mins
-
Screw drivers
It was alittle difficult at 1st to remove the clips that held in the socket. But once out everything went smoothly.
Was this helpful?
Thank you for voting!