TC522Q (P1135701W) Amana Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
My refrigerator door handle was cracked.
0 of 1 people
found this instruction helpful.
-
Kathy from North Kingstown, RI
- Really Easy
- Less than 15 mins
-
Screw drivers
Easiest repair ever. Just unscrewed 3 screws and replaced with new handle.
Was this helpful?
Thank you for voting!
The refrigerator door handle was broken and coming apart.
0 of 1 people
found this instruction helpful.
-
Plomer from Jacksonville, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
Removed the old handle and the new one fit like a glove.
Was this helpful?
Thank you for voting!
My good old refrigerator has been around a while. Through children who were not always gentle when opening and closing the door. The handle had all it could take. We duct taped it hoping it would hold on a little longer.
1 of 4 people
found this instruction helpful.
-
Linda from Orange, TX
- Really Easy
- Less than 15 mins
-
Screw drivers
I unscrewed the two screws at the top. Popped off the side cover and unscrewed that screw. Put the new handle in place and screwed in the screws.
Job complete!!!!
Job complete!!!!
Was this helpful?
Thank you for voting!
Refrigerator door handle broke
0 of 1 people
found this instruction helpful.
-
Donald from Wichita, KS
- Really Easy
- Less than 15 mins
-
Screw drivers
Removed 3 screws
Removed broken handle
Installed new handle
Installed 3 screws
Done
I received part in less than 24 hours
Removed broken handle
Installed new handle
Installed 3 screws
Done
I received part in less than 24 hours
Was this helpful?
Thank you for voting!
The refrigerator handle broke
0 of 1 people
found this instruction helpful.
-
Judy from Sebastopol, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
We ordered the part, in arrived promptly, and my husband installed it with no problems.
Was this helpful?
Thank you for voting!
plastic covering broken off.
0 of 1 people
found this instruction helpful.
-
Veldora from Moscow, PA
- Really Easy
- Less than 15 mins
Took screw out and put new part back on with same screw.
Was this helpful?
Thank you for voting!
light would work intermitently
0 of 1 people
found this instruction helpful.
-
Gregory from middle island, NY
- Easy
- Less than 15 mins
-
Screw drivers
removed the 2 screws that held the panel in place, had to reach up and push on locking tabs to lower trhe front of the panel. was able to then push on the locking tab of the switch to release it. removed the wires, replaced them onto the new switch, and snapped the switch into place. the rest was reverse of the uninstall process.
Was this helpful?
Thank you for voting!
Replace Bad Switch
0 of 1 people
found this instruction helpful.
-
carlos from haverstraw, NY
- Easy
- Less than 15 mins
-
Pliers, Screw drivers
Pry old switch and pull out. Disconect two wires. Put two wires on new switch, must be inserted right and connections not loose. Put switch in, making shure wies do not come off and snap in place
Was this helpful?
Thank you for voting!
old switch left freezer bulb always-on
0 of 1 people
found this instruction helpful.
-
JONATHAN from ELKINS PARK, PA
- Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
Unplug appliance. Socket wrench to unscrew two screws. Module drops down. disconnected two press-on wires by prying off with screwdriver. Removed old switch. Press-fit new switch. Reconnected two wires (color coded). Screwed module back in place. Plug in appliance.
Was this helpful?
Thank you for voting!
Broken light switch
0 of 1 people
found this instruction helpful.
-
George from North Scituate, RI
- Really Easy
- Less than 15 mins
-
Screw drivers
Part was easy to order, delivered quickly, installation very easy. Just unplug the unit, pop out the old swich using a screwdriver, disconnect and reconnect leads and pop switch back in. Definitely recommend that you can do it too.
Was this helpful?
Thank you for voting!
Broken Handle
0 of 1 people
found this instruction helpful.
-
John from Sarasota, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
Ordering took awile to sort out on color, almond and bisque seem to be the same color. Replacing the handle is a snap, save screws and logo. John good company and honest. John sarasota
Was this helpful?
Thank you for voting!
Broken door handle
0 of 1 people
found this instruction helpful.
-
Robert from Philadelphia, PA
- Really Easy
- Less than 15 mins
-
Screw drivers
From your website I heard how easy this would be, and it was! Three screws a little cleanup of the area and done! Thanks for everything.
Was this helpful?
Thank you for voting!
Handle was broken
0 of 1 people
found this instruction helpful.
-
Thomas from Muncie, IN
- Really Easy
- Less than 15 mins
-
Screw drivers
Removed 3 screws and removed broken handle. Installed new handle and replaced screws. The repair was very simple.
Was this helpful?
Thank you for voting!
Door Light switch cracked Mounting
0 of 1 people
found this instruction helpful.
-
Paul from Hinsdale, IL
- Really Easy
- Less than 15 mins
-
Screw drivers
I noticed that the refrigerator was having trouble maintaining temperature. Thought it might be time for new one until I found out that a new frig was $5k to $7K. Just happened to notice that the light switch didn't look quite right (was not sitting sqaure to the door). Once I pressed it it came loose. I then realized the the lights we
... Read more
re staying on (50 watts of heating). Replaced the switch and the frig started working like new.
Read less
Was this helpful?
Thank you for voting!
Broken Refigerator Door Handle
0 of 1 people
found this instruction helpful.
-
Jennifer from Aurora, IL
- Really Easy
- Less than 15 mins
-
Screw drivers
Extremely fast shipping. Ordered in the aftertoon, had item in hand the next morning. Easy installation, even for the mechanically challenged like me.
One suggestion though, when asking for a review, you should incorporate the Model Number within the email. I work on obtaining reviews for my company, and I have found that th ... Read more e more work involved to write a review, the less likely people are to do so. Just a suggestion.
One suggestion though, when asking for a review, you should incorporate the Model Number within the email. I work on obtaining reviews for my company, and I have found that th ... Read more e more work involved to write a review, the less likely people are to do so. Just a suggestion.
Read less
Was this helpful?
Thank you for voting!