EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

TBX25FPLLAD General Electric Refrigerator - Instructions

All Instructions for the TBX25FPLLAD
121 - 135 of 203

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The door activated light switch was missing.
1 of 3 people found this instruction helpful.
  • Don from Eugene, OR
  • Really Easy
  • Less than 15 mins
Pulled the two wires out from the access hole in the lower part of the refrigerator. Put them in the spade connectors on the new switch, and pushed the switch into place.
Was this helpful?
Thank you for voting!
broken part
1 of 3 people found this instruction helpful.
  • Minky from New York, NY
  • Really Easy
  • Less than 15 mins
I ordered the part one day and it was in my refrigerator by the next day. No tools required. You guys are incredible. This is the second time I ordered parts from you. You never disappoint!!
Was this helpful?
Thank you for voting!
Mounting bracket did not fit. Retainer for water input looked like a thread protector.
1 of 3 people found this instruction helpful.
  • Jack from Lake Helen, FL
  • A Bit Difficult
  • 1- 2 hours
  • Screw drivers, Socket set, Wrench (Adjustable)
Put bracket on workbench and hit two or three times with hammer. Glad I did not remove water inlet retainer from part, it can very easily be mistaken for a thread protector.
Was this helpful?
Thank you for voting!
Light socket missing in refrigerator
1 of 4 people found this instruction helpful.
  • Wayne from Issaquah, WA
  • Really Easy
  • Less than 15 mins
Frig parts had been scavenged in an apartment complex. Restoring socket was only a matter of plugging in two spade contacts and clipping in socket.
Was this helpful?
Thank you for voting!
Had never installed one before and was not sure which was top or bottom. The piece was made different than the original
2 of 7 people found this instruction helpful.
  • Paulette from Crandall, GA
  • A Bit Difficult
  • 15 - 30 mins
  • Screw drivers, Wrench (Adjustable)
Unhooked power to valve
Removed old valve by taking out 2 screws.
Used adjustable wrench to remove water lines. Then reversed and hooked everything back up
Was this helpful?
Thank you for voting!
ice maker just stopped
1 of 4 people found this instruction helpful.
  • larrie from punta gorda, FL
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Pliers
part arrived on schedule,
Was this helpful?
Thank you for voting!
Bad switch for door prevented interior light from coming on
0 of 1 people found this instruction helpful.
  • Patricia from Sylva, NC
  • A Bit Difficult
  • 15 - 30 mins
  • Pliers, Screw drivers
Just as your video described, although due to the age of the fridge, it took a bit longer to remove the defective switch. Your video made this so simple, I can't imagine why we lived with a dark fridge for so long! I was ready to buy a whole new fridge, as repairmen are often nonexistent for small repairs. I am the biggest fan of yo ur company & it's repair video. THANK YOU SO MUCH
Was this helpful?
Thank you for voting!
Ice machine wouldn't give ice, part had broken and was blocking output
0 of 1 people found this instruction helpful.
  • Donna from Houston, TX
  • Really Easy
  • 15 - 30 mins
Removed broken part (actually it fell out)

Inserted new part. Nothing to it.

All I had to do was raise feeding screw and attach new drive cup, the lower all back into ice tray
Was this helpful?
Thank you for voting!
Ice maker not working
1 of 4 people found this instruction helpful.
  • olin from forest city, NC
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
First i shut the water valve off going to the fridge, I then removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. Then i took the water line loose to the element, reverse the prosses and put all back on new element and installed,
Was this helpful?
Thank you for voting!
Rats had eaten drain lline.
2 of 11 people found this instruction helpful.
  • Mary from Placentia, CA
  • Really Easy
  • Less than 15 mins
Pulled out old drain gromet. Have to be careful not to put drain in motor. Experienced repair person could probably to in 5 minutes; it took my husband about 15 minutes. Did not really need entire drain line; just connection at top.
Was this helpful?
Thank you for voting!
light in freezer section not working
6 of 24 people found this instruction helpful.
  • Victor from Fort Myers, FL
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Using plyers Pulled old switch down and out. Put new one in and pushed new switch up into position. The switch plugs into the contacts, no wiring needed. Worked like a charm. You saved me 200 dollars GE repair bill. Thanks
Was this helpful?
Thank you for voting!
Rust in ice
  • James from Corpus Christi, TX
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Replaced auger and front helix kit.
Was this helpful?
Thank you for voting!
Replaced valve to ice maker
  • Ralph Q from Independence, MO
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers, Wrench (Adjustable)
had to replace copper water line to valve
Was this helpful?
Thank you for voting!
Fridge not cooling
  • Pedro from Miami, FL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Fairly easy I pull the fridge foward and remove the backing board and notice the fan wasn't working, so I remove the fan and bench tested and it was burned then I clean the condenser with compress air if you don't have air then a vacuum cleaner works then once the part arrived I install it the now if working very good
Was this helpful?
Thank you for voting!
Refrigerator was only dispensing crush ice and not cubes
  • Charles from Spring, TX
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Solenoid pushing the crushed ice flapper was burned out. Solenoid was easy to find unplug and replace. I used the old piston which simplified things. Now works great
Was this helpful?
Thank you for voting!
All Instructions for the TBX25FPLLAD
121 - 135 of 203