- Home
- RVM225WLC01
- Instructions
RVM225WLC01 General Electric Microwave - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
time would count down but unit would not run & heat.
2 of 6 people
found this instruction helpful.
-
Bill from Shawnee, OK
- Really Easy
- 15 - 30 mins
-
Screw drivers
remove cover, unplug secondary door switch (top switch)
remove switch from holder, install new switch, plug in wires, replace cover, very easy. door switches are a common problem
with microwave ovens.
remove switch from holder, install new switch, plug in wires, replace cover, very easy. door switches are a common problem
with microwave ovens.
Was this helpful?
Thank you for voting!
Interior Light Out
2 of 6 people
found this instruction helpful.
-
Steven from Waldorf, MD
- Really Easy
- 15 - 30 mins
-
Nutdriver, Pliers, Screw drivers
Removed Cover Plate,
Removed back cover
Bulb disintegrated removed base with pliers
Screwed in new lamp
Replaced cover
Done
Removed back cover
Bulb disintegrated removed base with pliers
Screwed in new lamp
Replaced cover
Done
Was this helpful?
Thank you for voting!
light bulb burned out
1 of 3 people
found this instruction helpful.
-
Lois Jane from Fernley, NV
- Really Easy
- Less than 15 mins
-
Screw drivers
took out several screws dropped down the panel under the microwave and unscrewed the bulb and put the new one in. It was a simple job.
Was this helpful?
Thank you for voting!
Bulb was burnt out
1 of 4 people
found this instruction helpful.
-
Judy Ann from Fort Pierce, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
Just unscrewed the screw holding the lens, unscrewed the bulb and put the new bulb in. Simple
Was this helpful?
Thank you for voting!
Broken handle
0 of 1 people
found this instruction helpful.
-
Mike from Las Vegas, NV
- Really Easy
- Less than 15 mins
-
Screw drivers
Piece of cake. removed old handle by taking out the 2 screws that hold it on, and then put new handle in place and tightened same 2 screws just snug to hold it in place.
Was this helpful?
Thank you for voting!
Many months agoI replaced a bulb in the light and it did not work. After swapping bulbs with the light on the other side I determined it was not the bulb.
1 of 4 people
found this instruction helpful.
-
Thomas from Rochester, MI
- Really Easy
- Less than 15 mins
-
Screw drivers
I asked a handyman at the local fitness center about repairing it and he refered me to your website where I found an exploaded drawing showing the parts I needed and how to get to them. It was great and very easy.
Other Parts Used:
Was this helpful?
Thank you for voting!
The bottom of the handle broke off at the screw
0 of 1 people
found this instruction helpful.
-
Penny from Boise, ID
- Really Easy
- Less than 15 mins
-
Screw drivers
First I removed the two screws that held the hand off. Cleaned up the area and screwed the new handle on! So easy.
Was this helpful?
Thank you for voting!
Handle broke off microwave
0 of 1 people
found this instruction helpful.
-
Maryann from New York, NY
- Really Easy
- Less than 15 mins
-
Screw drivers
PartsSelect is a great company! The handle was a breeze to replace. First the 2 screws were removed and the old handle discarded. The new handle was held in place as two new screws were inserted.Completed in less than 15 minutes!
Was this helpful?
Thank you for voting!
light out over stove
0 of 1 people
found this instruction helpful.
-
virginia from hilton head island, SC
- Easy
- Less than 15 mins
-
Screw drivers
so easy, but how do i turn light off?
Part recieved next day. thanks so much
Part recieved next day. thanks so much
Was this helpful?
Thank you for voting!
Replace the door handle
0 of 1 people
found this instruction helpful.
-
Nellie from Fair Oaks, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
Opened a beer. Removed the old handle. opened the next beer. Installed the new handle which was a perfect match. opened another beer. Sat down to rest.
The part was very easy to locate and order and even easier to replace. Although the beer part was not essential it certainly had it's benefits.
Many thanks for y ... Read more our great resource!!!
Gary Ownby
The part was very easy to locate and order and even easier to replace. Although the beer part was not essential it certainly had it's benefits.
Many thanks for y ... Read more our great resource!!!
Gary Ownby
Read less
Was this helpful?
Thank you for voting!
The door handle on the microwave broke off.
0 of 1 people
found this instruction helpful.
-
Thomas from Byron Center, MI
- Really Easy
- Less than 15 mins
-
Screw drivers
Finding your site was very easy and easy to use. I received the handle within 2 days and had it installed within less than 10 minutes. Very easy operation. Thanks.
Was this helpful?
Thank you for voting!
handle broke off
0 of 1 people
found this instruction helpful.
-
james from pittsford, NY
- Really Easy
- Less than 15 mins
-
Screw drivers, Wrench (Adjustable)
pulled out screws and put on new handle. Cake!
Was this helpful?
Thank you for voting!
The microvave door handle broke off
0 of 1 people
found this instruction helpful.
-
Michael from Lake Hopatcong, NJ
- Really Easy
- Less than 15 mins
-
Screw drivers
The repair was easy as 1, 2, 3!!! It took less than a few minutes to replace the door handle. I would strongly recommend PartSelect....the search was very easy in terms of finding the part I needed and it arrived within a few days of me placing the order. Overall, I was 150% happy with my experience.
Was this helpful?
Thank you for voting!
broken handle
0 of 1 people
found this instruction helpful.
-
Richard from Hillcrest, NY
- Really Easy
- Less than 15 mins
-
Screw drivers
Screwed new one in...very impressed with delivery. Part came the next day!
Thanks!
Thanks!
Was this helpful?
Thank you for voting!
bulb under the microwave was burned out
0 of 1 people
found this instruction helpful.
-
Samar from Fairfax, VA
- Really Easy
- Less than 15 mins
-
Screw drivers
changed the bulb
Was this helpful?
Thank you for voting!