RT45 (2012) Cub Cadet Tiller - Parts

The valve tappet attaches to the push rod. It is made out of metal and is sold individually. This is a Briggs & Stratton and Toro replacement part directly sourced from the manufacturer for use in engines. It may require a set of pliers during installation. This part may become broken and will need to be replaced.

It is a genuine OEM supplied replacement screw is specially designed for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. This is one of the screws for the air cleaner, please refer to the appropriate diagrams of your model for the correct location and use of this hardware. It is made of high-qual...Read moreity metal and it is sold individually, you will need a wrench in order to secure or remove it.

This timing key is an OEM direct from Briggs & Stratton. The metal component is compatible with many small engines, and is sold individually. The key secures the shaft in the crankshaft. A wrench is often required for making the replacement.

This replacement air cleaner gasket is a high-quality item that is supplied directly from original equipment manufacturer for use with Briggs and Stratton engines commonly installed on Toro's lawn and garden equipment. It provides an air-tight seal between the carburetor and the air cleaner. Over time gaskets tend to get compressed and de...Read moreteriorate eventually requiring replacement to ensure proper seal. This part is made from durable composite material and it is sold individually.

This high quality replacement starter rope is an authentic item that is supplied directly from original equipment manufacturer for use with Briggs and Stratton engines that are commonly installed on Toro lawn and garden equipment. It is an important part of the starter system that allows user to pull-start the engine. Please note this durable nylon item is sold individually.

This genuine part is a M6-1 x 12 Grade 8.8 mounting bolt that is zinc-plated. It is used to secure parts of your machine together, keeping these components tightly attached to each other so that they do not budge during operation. In lawn equipment, this bolt is usually used to attach the engine to the housing of the machine, but you may ...Read morealso find it in other areas of the machine. If the bolt rattles when you shake it, even when tightened, it is time to replace it. It must also be changed if it is corroded or bent, or else it may damage the components it is holding together. You will need to remove this mounting bolt with a socket wrench. This part is sold separately, so it is important to consult your user manual to understand how many bolts your machine needs. If you were initially replacing one bolt on your machine, you should consider purchasing more, as these bolts wear out at the same rate and you may end up needing to replace multiple bolts at once.

This Oil Seal has an OD of 1-3/4" and ID of 3/4". Installation of this OEM seal requires a screwdriver, pliers, socket set and wrench set, and is rated as being "Medium" difficulty by customers. This rubber seal attaches onto the drive shaft and prevents leaks between the drive shaft and transmission case. If broken due to wear/fatigue th...Read moreere will be a leak, and the part should be replaced. Refer to your make, model and diagram to ensure this part is correct for you.

This is a genuine OEM sourced part which is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. It is an identical replacement for a missing or faulty screw that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location...Read more and application of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

This is a genuine OEM sourced replacement part that is intended to be used with small engines from Briggs & Stratton and blower/vacs from Toro. The metal connecting rod is used to link the piston and the crankshaft assembly. This item is sold as an individual replacement part.

This is an authentic Briggs & Stratton replacement part manufactured for use with small engines. The special screw is commonly used with the carburetor group. This screw is used to secure the carburetor adapter. The screw is available as an individual replacement part, please see model diagram for associative parts.

A breather hose is used within the ventilation system for a crankcase, or engine, to connect the crankcase to the air manifold and allow hot air to escape. This genuine OEM breather hose is made of a high-quality rubber and is designed for use and compatible with several different makes and types of outdoor power equipment, such as lawnmo...Read morewers, tillers, engines, log splitters, and snowblowers. Due to the build material of this hose, it can break down over time and through exposure to gas, oil and excessive heat. If you notice any damage on the hose, fuel leaks or worsened engine performance resulting in rough idling or stalling, this hose may be damaged or simply need replacing. To replace this hose, locate the hose on your model and remove any clamps, before pulling off the old hose and installing the new, with any necessary hardware such as clamps.

An oil drain plug is used to provide a convenient, controlled and easier way to drain the oil from the engine and is typically located at the bottom of the machine, screwed into the oil sump/pan. This oil drain plug is compatible with various makes and models of lawn equipment and is made of high-quality metal measuring approximately 1-in...Read morech in length and is sold as an individual part. If you notice oil leaking from your machine, or worse performance from your machine, this drain plug could be missing or damaged. To replace this drain plug, simply unscrew the old drain plug and screw this one in its spot, making sure to tighten it to the manufacturer standard.