RT45 (2012) Cub Cadet Tiller - Parts

The Reverse Drive Belt is a 13 x 3/8 inch is a black rubber belt which attaches to the transmission and engine drive pulleys. This belt allows you to drive the unit backwards. If it's broken due to fatigue, or damage, you will no longer be able to drive backwards and the part must be replaced. Installation is rated as "Easy" by customers ...Read moreand requires pliers, a socket set and a wrench set. Refer to your make, model and diagrams to ensure this is the right part for you.

This silver metal lock washer helps prevent the nut on the drive belt pulley shaft from backing off during operation, it has a 5/16-inch inner diameter and a 1/2-inch outer diameter. one washer is included, replace it if fatigue or damage allows the connected shafts to spin freely, verify fit using the equipment model or owner manual

This is an authentic replacement part manufactured for use with Briggs and Stratton small engines. The special intake gasket seals the connection between the breather tube and carburetor. It is recommended to replace the gasket when servicing the carburetor, or air cleaner to assure a good seal when reinstalling the parts. The intake gasket is sold individually.

The crankcase gasket fits between the crankcase cover and the crankcase. This item is available as an individual replacement part and is made out of a thin material. It is a genuine replacement part for Briggs & Stratton engines and Toro snowthrowers and blower-vacuums. A socket set and a wrench set might be required during the replacement of this gasket. This part may become broken and will need to be replaced.

The stop switch is made of plastic and metal and helps to turn off the device. This is an authentic replacement part that is sourced from the original manufacturer for use with engines, generators, snowthrowers, and blower-vacuums made by Toro, Murray, and Briggs & Stratton. This part is available individually. During the installation pro...Read morecess, a wrench set and wire stripping pliers might be needed to replace this part. It may become bent or broken and will need to be replaced.

This is a genuine replacement part manufactured for small engines. This special gasket lies between the muffler and cylinder head, it is recommended to replace the gasket whenever installing the muffler to ensure a good seal. The gasket is sold individually, and is included in the gasket kit which is available separately.

The purpose of a muffler is to soften the noise coming from the engine. It is an authentic replacement part that is sourced directly from original manufacturer for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. Please note this high quality item is sold individually.

This is an authentic Briggs & Stratton replacement part, sourced from the original manufacturer for use with small engines. The special air cleaner cover is commonly used to secure the air filter to the air cleaner base. This air cleaner cover is available as an individual replacement part, please see model diagram for associative parts.

This high quality replacement part is supplied from original equipment manufacturer for use with Briggs and Stratton engines that are commonly installed on Toro lawn and garden equipment. It is used to provide and air tight seal for the rocker cover. Over time gaskets tend to deteriorate and crack eventually requiring replacement. Please note one durable composite material gasket is included per order.

It is a genuine manufacturer-approved component which is specially designed for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. This high-quality replacement gasket is used to create an air-tight seal for the cylinder head, please make sure to check appropriate diagrams of your model for correct ...Read morelocation and use of this item. It is a durable composite material gasket which is sold individually, over time it may get compressed and begin to deteriorate eventually requiring replacement.