Models > NE58F9500SS

NE58F9500SS Samsung Range - Overview

Models starting with NE58F9500SS

Keep searches simple, eg. "belt" or "pump".
Rubber Cushion – Part Number: DG73-00003A
Rubber Cushion
★★★★★
★★★★★
(1)
PartSelect #: PS4241222
Manufacturer #: DG73-00003A
Sold individually.
$6.57
  In Stock
THERMOSTAT;-,NT-101,250V – Part Number: DE47-20037A
THERMOSTAT;-,NT-101,250V
★★★★★
★★★★★
(4)
PartSelect #: PS4226434
Manufacturer #: DE47-20037A
$19.79
  In Stock
Range Convection Fan Motor Assembly – Part Number: DG96-00110E
Range Convection Fan Motor Assembly
★★★★★
★★★★★
(6)
PartSelect #: PS11720787
Manufacturer #: DG96-00110E
The convection fan motor spins the fan blade to circulate hot air through the oven for even heating.
$129.76
  In Stock
Convection Fan Motor – Part Number: DG31-00005A
Convection Fan Motor
★★★★★
★★★★★
(6)
PartSelect #: PS4240735
Manufacturer #: DG31-00005A
The fan motor helps rotate the upper fan blade to circulate the hot air though the oven cavity for even heating. This motor is reverse threaded.
$106.15
  In Stock
RACK ;FLAT;FE;FTQ;FCQ,MWSR-SWRM,629,41 – Part Number: DG75-01001C
RACK ;FLAT;FE;FTQ;FCQ,MWSR-SWRM,629,41
★★★★★
★★★★★
(3)
PartSelect #: PS7321783
Manufacturer #: DG75-01001C
$160.41
  Special Order
Range Main Glass Cooktop Assembly – Part Number: DG94-00889B
Range Main Glass Cooktop Assembly
★★★★★
★★★★★
(3)
PartSelect #: PS8764986
Manufacturer #: DG94-00889B
$540.23
  In Stock
Burner Switch – Part Number: DG44-01006A
Burner Switch
★★★★★
★★★★★
(2)
PartSelect #: PS8764900
Manufacturer #: DG44-01006A
$117.71
  In Stock
Convection Fan Motor - Lower – Part Number: DG31-00005C
Convection Fan Motor - Lower
★★★★★
★★★★★
(1)
PartSelect #: PS11735747
Manufacturer #: DG31-00005C
$127.94
  In Stock
Range Dual Radiant Surface Element – Part Number: DG47-00056A
Range Dual Radiant Surface Element
PartSelect #: PS4240844
Manufacturer #: DG47-00056A
This surface element is for ranges. Surface element supplies the heat to a cooking area on top of the range.   No Longer Available
Oven Temperature Sensor – Part Number: DG32-00004C
Oven Temperature Sensor
PartSelect #: PS4240744
Manufacturer #: DG32-00004C
$127.95
  In Stock
Convection Reverse Fan Motor - 120V 60Hz – Part Number: DG96-00110B
Convection Reverse Fan Motor - 120V 60Hz
★★★★★
★★★★★
(2)
PartSelect #: PS4241514
Manufacturer #: DG96-00110B
$136.47
  In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Convection oven fans were noisy.
This oven has two fans that counter rotate. One spins clockwise, the other counterclockwise. Because of this, the motors and the fan blades are different. The schematic shows the counter clockwise rotating fan with a right hand threaded shaft/nut on the bottom and the clockwise motor and fan with the left hand nut on the top. My range had the motors in the exact opposite orientation, but the fan blades on the motors as shown on the schematic. The incorrect assembly at the factory (I bought new in the box, so I know this is the first repair) meant that nether fan blade was turning the correct direction. So do yourself a favor, be sure you’re buying the right motor (clockwise or counterclockwise) and be sure you put the right fan blade on the right motor. The Samsung motor ending in F is the counterclockwise motor that has the right hand threaded shaft the clockwise motor with the left hand threaded shaft ends in E.
Parts Used:
Convection Fan Motor - Lower Range Convection Fan Motor Assembly
  • Sue from De Soto, IL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven shut off during self clean cycle and door stayed locked.
I took off the back cover after I looked at youtube similar problems. Then removed the little thermostat and un hooked the 2 wires. I looked up the part and after is was delivered couple days later I connected the 2 wies and after putting the back cover on the oven was back to normal. Was such an easy repair and the part was only $11.
Parts Used:
THERMOSTAT;-,NT-101,250V
  • Uwe from FORT COLLINS, CO
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
6 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bearing went out on the fan
Slide out the stove. Unplug the electricity. Remove the back panel with a screwdriver. Then go inside the oven and remove the two Philips head screws holding the fan cover. Then remove the nut holding the fan. Note, it is a left handed nut, so turn it right to loosen it. Pull off the fan. Return to the back and remove the nut and two screws that hold the fan. The fan slides right out. The only problem I had was that the electrical contacts on the new motor were wider than the original. I had to break the plastic so I could separate the wire leads, so that they would fit the new motor. Works like a charm.
John
Parts Used:
Convection Fan Motor - Lower
  • John from NASHVILLE, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!