NE58F9500SS Samsung Range - Parts

This door switch, also known as a safety switch, is a genuine OEM replacement part for microwaves. It is a safety mechanism that sends signals to the microwaves control system, telling it when the door is open/closed. This ensures that the microwave only operates when the door is securely shut and switches off as soon as the door is open....Read more Over time, this switch can become worn out or damaged. A faulty door switch can result in failure to switch the microwave on/off, lack of heat, and running with the door open. To confirm that the door switch is faulty, use a multimeter to test for electrical failure. To remove the faulty switch, disconnect the wiring connectors and take note of where they are positioned. Place the new switch in position and reattach the wiring connectors to the appropriate terminals and close the microwave door to check that the switch engages appropriately.

The Black Leveling Leg from Samsung is a durable, genuine part designed for use with many Samsung kitchen appliances. This quality leg-leveling device offers an easy-to-use design to correct uneven surfaces, promising consistent performance to ensure your appliance is always level and stable. Carefully crafted by Samsung, it is compatible...Read more with select Samsung Range models. This component helps support your appliance, with adjustable height for seamless alignment. Upon purchase, rely on your owner's manual for detailed installation guidelines. Choose Samsung for reliable, long-lasting appliance parts.

This is a high limit thermostat designed for microwaves, ranges and ovens. Made of plastic and metal, this thermostat is designed to open the electrical circuit for your appliance when it reaches a specific internal temperature. In some cases, high limit thermostats can become defective and if your appliance will not turn on, or has a spe...Read morecific error code, it must be replaced. This thermostat is a genuine OEM part that is sold as an individual part and can be replaced by disconnecting the appliance from the power, and accessing its panel, usually located near the bottom of your range, or wherever the heating element is located. Reference your user manual for exact location and replacement instructions.

This convection fan motor assembly is designed to circulate hot air throughout the oven cavity, promoting even heat distribution for more consistent baking and roasting results. By keeping air moving during convection cooking, it helps eliminate hot spots and improves overall cooking performance. Replacement is often needed if the oven fa...Read moren becomes loud, stops spinning, or causes uneven cooking temperatures. Supplied as a complete motor and fan assembly, this component offers a reliable solution for restoring quiet operation and efficient convection airflow when the original fan motor is worn or damaged.

The control switch turns the surface element on and off and controls how much heat the element produces.

This rubber cushion is supplied by the original manufacturer and has a shaft approximately 1 inch long. The cushion acts as a layer of protection between the oven door and oven frame/cavity. It prevents heat from escaping and protects the oven door and frame from abrasion and damage. If the rubber cushion becomes brittle or loses its elas...Read moreticity, you will likely notice heat escaping from the appliance, uneven cooking, as well as increased noise, and instability when opening or closing the door. Depending on your appliance model you may need to lift the top oven panel to access the cushion. Pull the faulty rubber cushion out from the oven frame and thoroughly clean the area where the new one will be placed to ensure a good seal. Press the new cushion into position and reassemble your oven to complete the repair.

The fan motor helps rotate the upper fan blade to circulate the hot air though the oven cavity for even heating. This motor is reverse threaded.

This energy regulator, more commonly known as a surface element control switch or burner switch is compatible with various models of Samsung ranges. It consists of the switch housing and a metal shaft. The burner switch is responsible for turning the surface element on and off and controlling the amount of heat that is produced by the sur...Read moreface heating elements on the stove. The most common sign that your element control switch is faulty is if the burner will only turn on high heat. Other signs of failure include difficulty adjusting the control knob, failure to produce heat, and the burner not shutting off.

This stainless steel wire rack is a sturdy platform for baking or roasting food, making sure heat circulates evenly. It measures approximately 7/16 inches by 24 3/4 inches and is usually found inside the oven. You can adjust its height using the multiple slots in the oven cavity to suit your cooking needs. Please keep in mind that this genuine OEM replacement part is sold individually.

This cooktop and frame assembly is a genuine OEM replacement part supplied by Samsung. It is specially made to fit with Samsung gas ranges. It includes a black frame made of stainless steel and a black glass cooktop. The glass cooktop sits on the countertop and the frame holds it in place. If your burners are not heating properly or the g...Read morelass is cracked, you will need to replace the assembly in order to safely continue using your range.

This dual radiant surface element is designed for use in electric ranges and cooktops with smooth-top surfaces. Constructed from durable materials, it delivers consistent and even heat distribution for reliable cooking performance. Rated at 12,000 BTUs, the element features a dual design that accommodates both 6-inch and 8-inch cookware, ...Read moreoffering flexibility for various cooking needs. Positioned beneath the glass surface, it ensures efficient heat transfer while maintaining a sleek appearance. Installation should be performed with the appliance powered off and disconnected from the electrical supply to ensure safety. Always verify compatibility with your specific model before replacement.

This genuine OEM left-threaded convection fan motor is responsible for spinning the fan blade, ensuring even circulation of hot air within your oven for consistent cooking. It is typically located behind a removable cover at the back of the oven. Signs of a faulty motor include rattling, squealing, or slow and irregular fan rotation. Negl...Read moreecting to replace the motor can result in uneven browning or undercooked portions in your food. To remove the motor, you will need a screwdriver and a socket set. Consult your user guide for instructions on accessing the back panel of your oven. Remove the mounting screws and the fan cover, then the nut securing the fan. Slide out the fan and motor assembly from your oven. Remember, the motor is sold separately from the fan, so consider this when purchasing a replacement.