MRS26 - Instructions

removed ice maker box and disassembled crusher unit on front of box and installed new housing.

First, I unplugged the appliance. Safety, first.
Than I removed the shield which was held in by screws. This covered the fan, thermometer.
The defrost thermostat was taken out, with a little extra force. The wires on the defective part were no longer attached to the part. The instructions were easy to follow in replacing the d ... Read more efrost thermostat. I stripped the coating on the wire, attached it with the enclosed electical bugs. The assy was able to follow, and the part went back on. The refrigerator is working perfectly. I couldn't have done it without the help in diagnosing the problem and with the speedy delivery of the new part. Thanks for all your help and the ease of the installing the new part!

got replacement ice container with ice crusher and dispenser in the door. removed broken one and slid in the new one like a drawer and started crushing ice right away!!

It was a dark and stormy night.....

Husband: AArrgghhh - we need a new refrigerator !!
WIfe: Nope, we just need to fix this one, and I know just how to do it. (partselect.com)
Husband: (of little faith) Fine, miss smartypants, go for it...

0) Wife orders correct parts from partselect.com and they arrive 3 d ... Read more ays later.
1) Wife manually removed the two old drawers and the Cover-storage pan (has drawer guides)
2) Wife attempts (unsuccessfully) to remove glass frontpiece from old drawer to put on new one.
3) Husband: "Lemme see that ...
4) WIfer (reluctantly): ...uh.. OK...
5) Husband puts drawer on counter and whacks it with his fist after disloging the front panel with a butter knife.
5) Wife (amazed) wow-nothing broke!
6) Husband repeats process and breaks the second front panel
7) WIfe (silently) Oh darn and shoot
8) Husband (verbally) *&%#!!!
9) WIfe (brightly) That's OK - I can glue it. No Problemo!!
10) WIfe (silently) *&%!!
11) Wife assembles old front panel onto first storage drawer
12) Wife cheerfully glues old front panel #2, prays, then assembles it onto second storage drawer.
13) Wife puts cover-storage-pan in refrigerator and slides top drawer in, noticing more friction and more play than ususal.
14) Wife notices that wheels are not included in the cover-storage-pan
15) Husband: Now we are S.O.L. for sure. We need to buy a new refrigerator.
16) Wife (OK, smugly) repairs herself to the storage shed, where she has cleverly kept the old part, which still has the wheels on it.
17) Wife removes wheels from old part and installs them onto new part without breaking anything.
18) Wife installs both drawers and is inspired to clean out the newly restored refigerator.
19) Husband (amazed) admits that family does not need to buy a new refrigerator after all
20) Teenage daughter emerging from her room in a daze, "Hey, is that a new refrigerator?"
21) Wife makes plans to spend remainder of budget that would be used to buy new refrigerator on pearl ring that she has been coveting.
22) AND THEY LIVED HAPPILY EVER AFTER....

removed drawer in frig then I removed broken shelf replaced with new one no tools needed replaced drawer.
For freezer I had to remove baskets then the screws holding the tracks replaced tracks and put new tracks back ,put baskets back.

Make sure unplugged the frig before doing any repair. Just like other DIYers. opened up the evaporator located inside the freezer. Replaced the defrost thermostat, there's only 2 wires, so just make sure which is positive, which is negative. Replaced the defrost timer located on the bottom front of the frig. There's on 2 screws to unscre ... Read more w. All those work took me less than half hour. Turn on the frig., now it works like a champ again. Hope it will last another 10 years.

I removed the screws that held the the ice dispencer from the bin. I than removed three screws from the bottom of the bin. I put the new plastic piece on the end of the spiral piece that
pushes the ice. I inserted the spiral piece back into the hole. I than screwed the ice dispencer
to the bin and re-inserted it back in the refr ... Read more igerator.
It took me about 5 to 10 minutes. It's really easy!

Installation was completed by following the online Parts diagram. Had to completely remove all parts, including the blades in ice crusher, and re-assemble. Glad the online diagram was clear and easy to read.

The untwisted the water filter took out the old water filter and replaced it with the new one and twisted the cover back on. it was very easy to do and now the water tastes very fresh :) thank you

I replaced the solenoid first because the ice maker was not getting water. After replacing the solenoid valve, I waited about 1/2 an hour, still no water. So, I ordered a replacement ice maker. I then installed the replacement ice maker, waited a 1/2 an hour, still no water. Then, I waited overnight. Yeah, ice! WORD OF ADVICE. WAI ... Read more T OVERNIGHT TO SEE IF THE ICE MAKER CREATES ICE. Not sure how long a cycle takes, but it's longer than you would think. Hope your installation is a success!

Pull out the unit from the wall, Unplugged the frig, removed the lower cover panel. Remove 2 screws holding the water valve from the unit, then removed the 2 connectors that turn on the relays. Connected the connectors to the new valve, then replaced inside of unit and replaced the lower back panel cover, plugged it back in, then tested t ... Read more he water flow at the spout, and waitied for the ice maker to kick in. Worked perfectly.

Unplug fan and remove 3 bolts. I had to bend the fan frame in order to remove fan. Change fan blade and reverse procedure. Fridge is fixed nice and cold

Removed the old fan--three small nuts and snap off connection. Ordered part and received the next day. Your company is great!!

I secured the power to the fridge. I took the metal panel which covers the cooling coils in the freezer off by removing the the 6 sheet metal screws. I used a standard hair dryer to melt the ice block which had formed due to the failure of the defrost timer. I replace the defrost timer, which was located behind the left front wheel of ... Read more the unit. Finding the timer was the hardest part of the job. Since I was having trouble with the defrost cycle I also decided to replace the defrost thermostat due to its age. The most important item I would like to share is once all the work is done and the panel is back in the freezer, the power is restored take a straight slot screw driver and give the defrost timer about an eighth of a turn clockwise to ensure it starts. Then mark it with a sharpe and check it in 3 or 4 hours to make sure it is running. I did not do this on the one I installed and the freezer did not go into the defrost cycle. Once I got the timer started, well the ice cream stay frozen. BE SURE NOT TO WORK ON YOUR EQUIPMENT WITH IT PLUGGED INTO POWER SOURCE!!!

Jim

i looked byhind the freezer , the mottor has the relay connected to it.i took out the relay, and i descovery something was loose inside, i decided to take to check out at sears to see if they have in stock that especific relay. they did not have, they could order, that's when i dicided to go ahead and looking for in the internet, good i f ... Read more ound PARTSELECT,they had the part and i was very nice attended,they sent in 2 days i had fix my freezer. thanks PARTSELECT. gilmar couto.