Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Wrong size listed on website.
0 of 1 peoplefound this instruction helpful.
Elizabeth from Weems, VA
Really Easy
Less than 15 mins
The end cap is easy to remove and replace. The personnel at PartSelect was extremely helpful in re-ordering the correct part.
Was this helpful?
Thank you for voting!
End caps broken
0 of 1 peoplefound this instruction helpful.
Russell from Clevelamd, TN
Really Easy
Less than 15 mins
End caps snapped out of door, Replaced with new caps
Was this helpful?
Thank you for voting!
Freezer built ice, fridge not cold enough and running constantly.
1 of 4 peoplefound this instruction helpful.
LUIS from CENTENNIAL, CO
Really Easy
Less than 15 mins
Screw drivers
Removed front low grill, removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the wires. Reversed process to install new timer.
Was this helpful?
Thank you for voting!
The door end caps were broken and not fixable
0 of 1 peoplefound this instruction helpful.
Ryan from Coralville, IA
Really Easy
Less than 15 mins
I simply placed the retention bar between the new end caps and popped it into place. Took about 10 seconds to complete.
Was this helpful?
Thank you for voting!
frezzer iceing over and not cooling the refrigerator
1 of 4 peoplefound this instruction helpful.
Marcus from Pine Hill, AL
Really Easy
Less than 15 mins
Just removed the two screws and unpluged it. Then I pluged the new one in and replaced the screws. It runs like a brand new reffrigerator. Thanks for the fast delevery. Will do busness with you in the future.
Was this helpful?
Thank you for voting!
clips on both end caps we broken and the crossbar kept falling off.
0 of 1 peoplefound this instruction helpful.
Frank from Orange Park, FL
Really Easy
Less than 15 mins
First i pulled the crossbar off the door, then I pulled both end caps off the crossbar and then I put the two new end cap on the crossbar and then tapped snoggly into place with the palm of my hand. Job done. took all of about 5 seconds.
Was this helpful?
Thank you for voting!
Broken drawer
2 of 7 peoplefound this instruction helpful.
Antonia from Germantown, MD
Really Easy
Less than 15 mins
Bought a new drawer and just used the clear front from the broken drawer. Very easy to replace. Also fast delivery , thank you part select.
Was this helpful?
Thank you for voting!
door end cap broken,
0 of 1 peoplefound this instruction helpful.
Edward from Piscataway, NJ
Really Easy
Less than 15 mins
Put the new ordered door end caps in place, everything worked fine.
Was this helpful?
Thank you for voting!
Left bottom part of door rusting out
0 of 1 peoplefound this instruction helpful.
William from Moulton, TX
Easy
15 - 30 mins
Pliers, Socket set
took door off. sanded rusting hinge and greased. installed door hinge washer. I had to install a larger washer over hinge bearing to help support the door where it was rusting. no sweat. works like its new. thanks to you guys for having the parts.
take 1/4 hex screws out clean out dust ,remove old fan blade replace with new install bolts .
Was this helpful?
Thank you for voting!
freezer worked frig was warm. Ice maker is still not working
0 of 1 peoplefound this instruction helpful.
steve from Kirkland, WA
Really Easy
15 - 30 mins
Screw drivers
Removed two screws to get to defrost time pull panel down remove two screws holding time and reinstall
Was this helpful?
Thank you for voting!
Freezer okay, but fridge was warm
0 of 1 peoplefound this instruction helpful.
brad from minneapolis, MN
Easy
30 - 60 mins
Nutdriver, Screw drivers
Website was great!
The defrost timer was right in front. 2 minutes and a screwdriver and I had it replaced.
To replace the thermostat, I had to take out the back panel, defrost it and then install the new part. the only problem was that the heatshrink tubing they sent was too large. Otherwise, it worked great.
took 4 screws out of the discharge vent on top of the refrigerator section and unpluged the wiring harness and put the section on the counter and unscrewed the timer and put the new one in and reinstalled the assembly and plugged the Jack and put the 4 screws back in, and rotated the timer and put it on defrost removed the back and check
... Read morethe heaters and drain .
Read less
Was this helpful?
Thank you for voting!
leaking water down into fridge
0 of 2 peoplefound this instruction helpful.
Ronald from Defiance, OH
Really Easy
15 - 30 mins
Nutdriver, Screw drivers
just like the video showed...it was excellent!!!
Was this helpful?
Thank you for voting!
We Are Moving Out Of Military Housing And We Had To Replace The Freezer Door Holder Before We Moved Or We Would Have Had To Pay For The Wholr Refrigerator
0 of 2 peoplefound this instruction helpful.
Christopher from Fort Sill, OK
Really Easy
Less than 15 mins
We replace the end pieces to hook the holder back on the door.
My Orders
