JSS014J2 General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Baking element no longer worked.
1 person
found this instruction helpful.
-
Stanley from Cave Creek, AZ
- Really Easy
- 15 - 30 mins
-
Nutdriver
Removed 4 screw nuts and replaced with new baking element using same 4 screw nuts. Real easy job.
Was this helpful?
Thank you for voting!
Bake element burnt out
1 person
found this instruction helpful.
-
David from West Union, AL
- Easy
- 15 - 30 mins
-
Nutdriver
Firs I shut the power off to the range. Then I removed the bottom oven rack, then removed the two screws holding the element in place. I pulled the element out about 3 inches to pull the connecting wires off. However, when I pulled the element towards me a lost on of the connecting wires that attached to the element. I then had to pull th
... Read more
e range away from the wall and remove the back cover panel.I then fed the new element into the wholes from the inside of the range and having the back panel removed gave me full access for reconnecting the element wires. I put the back cover panel into place , put the bottom oven rack in and that was it. I was done with the repair. I turned the power back on and everything worked fine. I would recommend removing the back cover panel prior to trying to remove the element. This will save you some time and give you full access to the wiring before attempting to remove the bake element.
Read less
Was this helpful?
Thank you for voting!
The bottom oven heat element didn't work
1 person
found this instruction helpful.
-
Marilee from Newburgh, IN
- Easy
- 15 - 30 mins
-
Pliers, Socket set
1. Removed the old element. Had a little trouble loosening the screws. After we got them loose, everything was easy.
2. Pulled out the element and disconnected the wires.
3. Connected the wires on the new element.
4. Screwed the element back in.
5. Connected the stove and turned on the oven.
6. It works like a ne ... Read more w one.
2. Pulled out the element and disconnected the wires.
3. Connected the wires on the new element.
4. Screwed the element back in.
5. Connected the stove and turned on the oven.
6. It works like a ne ... Read more w one.
Read less
Was this helpful?
Thank you for voting!
Worn out burner element
1 person
found this instruction helpful.
-
Art from SEATTLE, WA
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
1. Turn off power to range and remove element.
2. Remove clips from ceramic guards.
3. Disconnect wiring.
4. Connect wires to new element.
5. Install ceramic guards and clips
6. Attached element to range.
7. Restore power.
2. Remove clips from ceramic guards.
3. Disconnect wiring.
4. Connect wires to new element.
5. Install ceramic guards and clips
6. Attached element to range.
7. Restore power.
Was this helpful?
Thank you for voting!
bake element no heat
1 person
found this instruction helpful.
-
larry from buckhannon, WV
- Really Easy
- 15 - 30 mins
-
Nutdriver, Pliers
took old element out , put new element in.very easy.
Was this helpful?
Thank you for voting!
Oven heating element failed
1 person
found this instruction helpful.
-
megrew, from COLORADO SPGS, CO
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
Identify oven breaker and turn off power before starting. Opened oven door. Removed oven racks. Use 1/4" socket or nut driver to remove the 2 bolts holding heating element mounting bracket at rear base of oven. Carefully pull element out of installation mount to remove the 2 machine screws that attach electrical wires to the heating eleme
... Read more
nt. Reattach wires in same order as original element. Then reinstall new element in reverse order of removal. Took all of maybe 15 minutes! Excellent OEM Parts!
Read less
Was this helpful?
Thank you for voting!
Element burned out
1 person
found this instruction helpful.
-
Wendy from CHESHIRE, CT
- Really Easy
- 15 - 30 mins
-
Socket set
My husband first turned the main breaker off to the stove. Pulled the stove away from wall, took off the back plate, unhooked the element and out the new one in!!
Was this helpful?
Thank you for voting!
Heating Unit had seperated from my coils.
1 person
found this instruction helpful.
-
Rosemary from New Port Richey, FL
- Easy
- 30 - 60 mins
-
Screw drivers, Socket set
A friend had stopped by and insisted on replacing the heating element on my 32 year old range. It took him all of 45 minutes to replace it, and now it works like a charm.
Was this helpful?
Thank you for voting!
Halogen element staying on
2 of 4 people
found this instruction helpful.
-
Arthur from Indian Harbour Beach, FL
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers
removed the end caps from the stove panel, unscrewed the back, unscrewed the old switch, CAREFULLY noting which wire went to which terminal, removed the wires.
Reversed the process. took a little longer because I felt compelled to do a thorough cleaning while I was there.
Reversed the process. took a little longer because I felt compelled to do a thorough cleaning while I was there.
Was this helpful?
Thank you for voting!
The small element blew out consequently shorting out the infinite switch.
3 of 7 people
found this instruction helpful.
-
Susan from Bend, OR
- Really Easy
- 15 - 30 mins
-
Screw drivers
The very first thing we did was turned the circuit breaker off and unplugged the range.
My husband removed the back panel and unplugged the switch. Drew a diaghram of the color coded wires. When we received the new one he broke the extension bar off to fit the knob, plugged it in and we were back in business. It was very easy for m ... Read more y husband as he is a mechanic (millwright). However, if you are mechanically inclined it is an easy fix.
My husband removed the back panel and unplugged the switch. Drew a diaghram of the color coded wires. When we received the new one he broke the extension bar off to fit the knob, plugged it in and we were back in business. It was very easy for m ... Read more y husband as he is a mechanic (millwright). However, if you are mechanically inclined it is an easy fix.
Read less
Was this helpful?
Thank you for voting!
One burner was not level and the otherone I burned out tea kettle on it and when I pulled the kettle off the burner it was also not level not to mention part of the kettle was burned onto the burner.
2 of 4 people
found this instruction helpful.
-
Jenean from San Jose, CA
- Really Easy
- 15 - 30 mins
-
Screw drivers
I didn't turn the power off which was risky and dangerous, however it was very easy just removing one screw a couple of wires and installing the new one. VERY EASY!
Other Parts Used:
Was this helpful?
Thank you for voting!
Bake element burned out in oven
1 person
found this instruction helpful.
-
AL from GENOA, NE
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
First shut off power to the range in the electrical
breaker box (its the 220 breaker) as marked.
Remove the oven door ( open part way and lift up) the
door will come off.
Remove the 2 screws that the element is attached to the
back of the oven wall. Pull element out part way and
disconnect the 2 ... Read more wires. Take out element.
The new element had different connections so I cut off
the clips stripped the wires and attached to the element
connection . The element had connections that this was
possible. Push wires back into oven wall and install the
new element with the 2 screws that were removed. You
could also put on clips to the 2 wires that attach to the
element if so desired. (Eye hole clips.)
breaker box (its the 220 breaker) as marked.
Remove the oven door ( open part way and lift up) the
door will come off.
Remove the 2 screws that the element is attached to the
back of the oven wall. Pull element out part way and
disconnect the 2 ... Read more wires. Take out element.
The new element had different connections so I cut off
the clips stripped the wires and attached to the element
connection . The element had connections that this was
possible. Push wires back into oven wall and install the
new element with the 2 screws that were removed. You
could also put on clips to the 2 wires that attach to the
element if so desired. (Eye hole clips.)
Read less
Was this helpful?
Thank you for voting!
bake element burned out
1 person
found this instruction helpful.
-
Dave from Maryville, OH
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
took cover off back of stove. Removed two screws and wires that were attached to the element. Removed old element and installed new element. An easy repair.
Was this helpful?
Thank you for voting!
bake element disintegrated
1 person
found this instruction helpful.
-
Susan from New Lebanon, NY
- Really Easy
- 15 - 30 mins
At 76 I no longer do my repairs so I asked my daughter's friend to do it for me.
Was this helpful?
Thank you for voting!
Old Reliable
1 person
found this instruction helpful.
-
Laura from Crofton, MD
- A Bit Difficult
- 15 - 30 mins
-
Wrench set
This range is about 30 years old and I was thrilled to still be able to get the bake element, which burned out about a month ago. I was doing research to buy a new stove when a cousin, from out of town, called to say they were going to visit the following week. No time now to get a new one installed. "partselect.com" was the fastest way.
... Read more
THANK YOU!
First off, I want you to know I'm an obese 56-year female without tools. But, I knew where to borrow those.
I first shut the power off to the range. I then disconnected the 2 screws that hold the element and pulled it out to reveal the 2 screws which connected the wires. I unscrewed those and removed the bake element. I double checked the stove model and bake element part # at the GE website and ordered it from "Partselect.com". It came in about 3 days. I then reversed the order of the above and it was done.
Here are some challenges I encountered..
1) The oven door was in the way making it uncomfortabe to get to the back of the stove.
2) Those $#%& screws are so short I kept dropping them.
3) The wires in the back bend easily. Be careful.
That's about it. It was a pill but not a real problem. It sure beat buying a new range before I've decided on which one to buy.
First off, I want you to know I'm an obese 56-year female without tools. But, I knew where to borrow those.
I first shut the power off to the range. I then disconnected the 2 screws that hold the element and pulled it out to reveal the 2 screws which connected the wires. I unscrewed those and removed the bake element. I double checked the stove model and bake element part # at the GE website and ordered it from "Partselect.com". It came in about 3 days. I then reversed the order of the above and it was done.
Here are some challenges I encountered..
1) The oven door was in the way making it uncomfortabe to get to the back of the stove.
2) Those $#%& screws are so short I kept dropping them.
3) The wires in the back bend easily. Be careful.
That's about it. It was a pill but not a real problem. It sure beat buying a new range before I've decided on which one to buy.
Read less
Was this helpful?
Thank you for voting!