EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JSS014J2 General Electric Range - Instructions

All Instructions for the JSS014J2
76 - 90 of 416

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
element wont heat up
1 person found this instruction helpful.
  • Mr Sal from Eastampton, NJ
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
4 screws 4 off then 4 on done
Was this helpful?
Thank you for voting!
elemant had burnt into
1 person found this instruction helpful.
  • Tracy from Paris, IL
  • Really Easy
  • Less than 15 mins
  • Nutdriver
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, then i connect the new element and and replaced the screwes that held it in very simple and I must say Part select was very fast at getting me the correct part the first time , they have earned a spot in my Favorite list
Was this helpful?
Thank you for voting!
Stove top burner died of old age.
1 person found this instruction helpful.
  • Jim from Marco Island, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed the hinge mounting screw and disconnected the wiring. Hooked up the new element and replaced the mounting screw. A quick and easy $45 repair (part +shipping) that I am quite pleased with. Jim W., Marco Island, FL
Was this helpful?
Thank you for voting!
No heat from bake element
1 person found this instruction helpful.
  • Roberta from Southampton, NJ
  • Really Easy
  • Less than 15 mins
  • Socket set
Ordered part, took old bake element out, installed new bake element. It was real easy.
Was this helpful?
Thank you for voting!
Bake element burned out
1 person found this instruction helpful.
  • Lavona from JACKSONVILLE, FL
  • Very Easy
  • Less than 15 mins
  • Screw drivers, Socket set
Flip the circuit breaker going to oven off, then used a 1/4 inch socket on the mounting flange bolts and the bolt head screws attaching the wires. Then used a flat head screwdriver to reattach the wires with the supplied screws and bolted the new element in place. Back to the circuit breaker flipped the switch and turned the oven on to te st it, and now works fine. *be sure to remove the sticker before installation, use rubbing alcohol to remove any residue.*
Was this helpful?
Thank you for voting!
Bottom oven heating element was out
1 person found this instruction helpful.
  • John from FALL RIVER, MA
  • Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Very easy repair. 2 hex head screws to take the heating element out. Then 2 more slot head screws for the wire connections. Perfect fit and operation of the new heating element.
Was this helpful?
Thank you for voting!
Really old range. Broken bake element in oven.
1 person found this instruction helpful.
  • Kathleen from Grand Rapids, MI
  • Very Easy
  • Less than 15 mins
Turned off power. Removed old broken one installed new one in minutes. Turned power on and tested it out. If this 60 something lady can do it, you can too.
Was this helpful?
Thank you for voting!
Bottom Bake Element had burnt into/split
1 person found this instruction helpful.
  • Miranda from UNION GROVE, NC
  • Really Easy
  • Less than 15 mins
  • Socket set
Very easy and simple/ After making sure power supply was off, removed socket screws in back plate of element, slid old element out, attached new element and replaced/tightened socket screws on plate and new element. Power on, oven on .. heated quickly and nicely. Used oven several times since ... no problems.
Was this helpful?
Thank you for voting!
Bottom Element On The Top And Bottom Oven Burned Out
1 person found this instruction helpful.
  • Tammy from McKinney, TX
  • Really Easy
  • 15 - 30 mins
  • Wrench set
Just like your example said/turn the power off to the oven/remove the screws that hold the element in place and then I pulled th element out a little ways and disconnected the wires/reconnecting took a little longer only because it was hard to see/but I connected the two wires and put the screws back in and it worked. Saved me a lot of m oney/my husband wanted to get a new double oven
Was this helpful?
Thank you for voting!
The bake element burned in half.
1 person found this instruction helpful.
  • RICHARD from BETHLEHEM, PA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
First I turned the power off to the oven/stove at the breaker box in the basement. Then I took the back plate off. Then I removed the two screws holding the wires onto the damaged element. Then I removed the two screws holding the element to the inside rear of the oven. Then I pulled the old element out and replaced it with the new elemen t. I replaced the two screws that hold the element to the inside of the oven. Then I replaced the wires on the element where it protruded at the back of the oven. I put the back plate back on, slide the oven back in place and turned the power back on at the breaker and everything worked.
Was this helpful?
Thank you for voting!
Bottom element in oven caught on fire and broke in two
1 person found this instruction helpful.
  • SHERYL from VERO BEACH, FL
  • Easy
  • 15 - 30 mins
  • Nutdriver
The element was 25 years old and I was concerned about changing it. But is was so easy. I turned off power and removed 2 screws and then unscrewed the wiring from the old element. I had the new one installed in minutes. I was so glad to have my oven working again. Who needs a man.
Was this helpful?
Thank you for voting!
Bottom Bake Element wouldn't heat
1 person found this instruction helpful.
  • Kevin from Warminster, PA
  • Easy
  • 15 - 30 mins
  • Socket set
First I turned the Breaker off for the Oven. I removed the two screws that hold the element/cover plate. I pulled the element out to get access to wires attached to element & removed screws holding wires to element. I reversed the process to put back together.
Was this helpful?
Thank you for voting!
Element cracked
1 person found this instruction helpful.
  • Linda from Manassas, VA
  • Easy
  • 15 - 30 mins
  • Nutdriver
The repair was fairly easy. Removed the 2 screws that hold the plate to the oven and then pulled out the element and loosen up the screws that connect it. Installed the new element and re-attached the element to the plate and secured the plate back to the oven. This site was very easy to use and very helpful and I will use it again if I n eed another part.
Was this helpful?
Thank you for voting!
Bake element burned out due to age
1 person found this instruction helpful.
  • Douglas Minich from South Windsor, CT
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Shut off the power at the circuit breaker, removed the two nuts holding the element to the oven, unscrewed the two screws connected to the wire leads, removed the bad element and reversed the process to replace with the new one.
Was this helpful?
Thank you for voting!
Bake element shorted and broke
1 person found this instruction helpful.
  • David from Littleton, CO
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
TURN OFF CIRCUIT BREAKER before doing anything even if oven is not turned on! If I hadn't checked voltage with tester before starting I would have made a shocking discovery.
1) unscrewed shield cover to get get at the element screws.
2) unscrewed element screws and removed old element - pulling connecting wires out about 3 inch es
3)attached new element to connecting wires (2 screws)
4) pushed new element into place and reattached element connector plate to wall of oven
5) reattached shield cover to wall of oven
Was this helpful?
Thank you for voting!
All Instructions for the JSS014J2
76 - 90 of 416