EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JMS08BA2WH General Electric Range - Instructions

All Instructions for the JMS08BA2WH
61 - 75 of 165

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
broken heating element
1 person found this instruction helpful.
  • Sherry from BLUFFTON, SC
  • Very Easy
  • Less than 15 mins
remove broken heating element and install the new one
Was this helpful?
Thank you for voting!
Old drip bowls were badly tarnished . . . shine could not be restored.
1 person found this instruction helpful.
  • Paul from PROVO, UT
  • Really Easy
  • Less than 15 mins
1) Make sure unit switches are turned off. 2) Lift Calrod unit up and pull it from electrical receptacle. 3) Withdraw Calrod unit from old bowl. 4) Insert Calrod unit through large hole in new bowl. 5) Push Calrod electrical connectors into receptacle under range top. 6) Seat Calrod unit on bowl rim and insert the assembled Calrod un it and bowl into the hole in the range top.
Was this helpful?
Thank you for voting!
Drip bowls had deteriorated after years of use
1 of 2 people found this instruction helpful.
  • Stuart from UNION SPRINGS, NY
  • Very Easy
  • Less than 15 mins
Removed burners and existing drip bowls and installed new drip bowls and existing burners took approximately 15 minutes
Was this helpful?
Thank you for voting!
dropped & broke the oven light bulb cover
1 of 2 people found this instruction helpful.
  • joseph from san jose, CA
  • Really Easy
  • Less than 15 mins
popped the new one on!
Was this helpful?
Thank you for voting!
Broiler element blew out.
2 of 5 people found this instruction helpful.
  • Gilbert from Clarkston, MI
  • Difficult
  • 1- 2 hours
  • Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
- removed the old element
- looked for part number, was none
- could not find direct replacement listed
- compared to dimensions on drawing
- ordered part
- discovered that the mounting plate on new element was too small, holes did not line up, did not cover opening in back of oven.
- sawed off mounting plate on new element
- removed mounting plate from old element
-drilled out holes on old mounting plate to accept new element
- attached the modified element
- Everything works fine.
Was this helpful?
Thank you for voting!
Upper over broil unit burned out
1 of 2 people found this instruction helpful.
  • tim from fort scott, KS
  • Really Easy
  • 15 - 30 mins
  • Wrench set
This part is a plug-in unit - two screws off; unplug the old unit; plug in the new unit; two screws on. Very simple.
Was this helpful?
Thank you for voting!
Burnt Terminal Block
1 of 2 people found this instruction helpful.
  • Bayani P. from DALY CITY, CA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
Unplug the range before opening the back panel and removed the wiring connection and replaced with the new one
Was this helpful?
Thank you for voting!
8" stove element stopped working
1 of 2 people found this instruction helpful.
  • Michael from Standish, ME
  • Really Easy
  • Less than 15 mins
Everything was very easy: identifying the right part was very easy on the website, the part came quicker than I expected, and my wife replaced the stove element before I even got home from work. She just pulled the old one out like she would to clean the top of the stove, and put the new one back in. Have had several awesome cups of co ffee since the replacement.
Was this helpful?
Thank you for voting!
I researched the part number from partselect.com, ordered it and in less than a week (even in all the snow!) I had my part. Fifteen minutes later, my wife was broiling dinner! I repaired my broiler element without waiting on a repairman and for less than $50.00!
1 of 2 people found this instruction helpful.
  • Elwood from Allen, MD
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. Replaced the defective element with the new - all inless than fifteen minutes!
Was this helpful?
Thank you for voting!
Surface Element/burner had to be replaced
1 of 2 people found this instruction helpful.
  • Natalie from Harleysville, PA
  • Really Easy
  • Less than 15 mins
First, I removed the burner from the box and plastic bag. Second, I pushed the burner into the socket and that was it.
I also want to comment on how easy the ordering process was. I ljust love this website. All you have to do is type in the model number and up comes all of the parts associated with the appliance. My order shippe d the next day and I had unit within 2 days. Also, the part cost $42.00 with shipping. My local parts place was $48.00, so I wound up saving $6.00 and did not have to leave my home to buy it. I will definetly use this site again.
Was this helpful?
Thank you for voting!
Large burner quit working
1 of 2 people found this instruction helpful.
  • JoAnn from Fort Worth, TX
  • Really Easy
  • Less than 15 mins
I pulled out the old burner - put the new one in and I was done. No tools required.

The first burner I received from PartSelect was warped. I called on Friday morning to see about returning it and ordering a new one. The CSR was very helpful and I was totally surprised to have the replacement arrive the very next day since I di dn't ask for a Saturday delivery. I will definitely use PartSelect again.
Was this helpful?
Thank you for voting!
part replacement
1 of 2 people found this instruction helpful.
  • charles from st marys, GA
  • Really Easy
  • Less than 15 mins
pull out, push in
Was this helpful?
Thank you for voting!
Burner Would Not Heat
1 of 2 people found this instruction helpful.
  • Robert from La Crosse, WI
  • Really Easy
  • Less than 15 mins
Did it By Hand
Your Shipment Time Excellant
Order it Mon. Received it Wed.


Thank You
Was this helpful?
Thank you for voting!
rusted drip bowls
1 of 2 people found this instruction helpful.
  • Caren from Choctaw, OK
  • Really Easy
  • Less than 15 mins
I was very excited to get them in the mail but waited to install after a clean up but when I finally opened the box I found I only ordered 1 6 inch drip bowl. lol Now that I know they fit when I reorder I am ordering a who new set for later use.
Was this helpful?
Thank you for voting!
Element burned out.
1 of 3 people found this instruction helpful.
  • Harden from Lynchburg, VA
  • Easy
  • 15 - 30 mins
  • Nutdriver, Pliers
I spent half an hour finding my driver set. It took about 25 minutes to turn the power off, remove the racks and element and replace the new elements.
Was this helpful?
Thank you for voting!
All Instructions for the JMS08BA2WH
61 - 75 of 165