EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JMS08BA2WH General Electric Range - Instructions

All Instructions for the JMS08BA2WH
31 - 45 of 165

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Replacement of old parts
3 of 4 people found this instruction helpful.
  • Margaret from Norwalk, CT
  • Really Easy
  • Less than 15 mins
Fortunately there was no repair needed, just a replacement of old parts, but I was very pleased with the speed of delivery and the quality of the parts. I'm a happy customer.
Was this helpful?
Thank you for voting!
handle broken
11 of 28 people found this instruction helpful.
  • robert from oxford, MI
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
It was very simple. Remove 5 screws and attach the new one with the same 5 screws. Took about 10 minutes.
Was this helpful?
Thank you for voting!
Drip pans on stove top burned black
3 of 4 people found this instruction helpful.
  • Dan from Tucson, AZ
  • Really Easy
  • Less than 15 mins
I got tired of trying to find the right parts in the stores and decided to order them. Finally I have the drip pans that fit my range!
Was this helpful?
Thank you for voting!
old unit failing to heat all coils
2 of 2 people found this instruction helpful.
  • Emma from The VIllags, FL
  • Really Easy
  • Less than 15 mins
I first removed the unit by pulling gently from connection. Replaced the new one in that same manner - simply inserting into connection.

Very easy, I'll probably try it again soon.
Was this helpful?
Thank you for voting!
melted electric range element
3 of 5 people found this instruction helpful.
  • Carole from Cleveland, OH
  • Really Easy
  • Less than 15 mins
Because of the superb pics and descriptions on the Part Select site, I was able (with NO range model number) to order the correct range element for beloved son's stove. He plugged it in in 3 seconds, works great !
Was this helpful?
Thank you for voting!
Terminal block connectors worn out wasn’t making a good connection with the stove top burner
2 of 2 people found this instruction helpful.
  • Lance from HAHIRA, GA
  • Really Easy
  • 30 - 60 mins
  • Nutdriver
Cut 4 inch’s off the new terminal block wires then using my wire strippers stripped 1/2 inch off the ends , the old terminal block wires I stripped 1/2 inch at the ends using a wire nuts on both wires and electrical tape connected the terminal block to the stove plugged the new burner in and the burner worked 100%.
Was this helpful?
Thank you for voting!
Needed new drip pans
2 of 2 people found this instruction helpful.
  • Patricia from GORDONVILLE, TX
  • Really Easy
  • Less than 15 mins
Replaced drip pans
Was this helpful?
Thank you for voting!
It was burned out
2 of 2 people found this instruction helpful.
  • lan from SANTA CLARA, CA
  • Really Easy
  • Less than 15 mins
  • Socket set
I just follow Steve's Installation Vidio. My range works.
Thanks Steve
Was this helpful?
Thank you for voting!
The top (broiler) element melted in two.
2 of 2 people found this instruction helpful.
  • Kenneth from PLANO, TX
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Socket set
Be sure to flip the breaker to the oven to the OFF position before doing anything. Take out the two screws at the back of the oven that hold the element. Carefully pull the element forewarn to expose the connections to the wires. Disconnect the element from the wiring connectors. Be careful not to damage the connectors or the wiring. Plug the new element into the wiring connectors. Make sure you have the connections firmly in place. Push the wiring and connectors back into place. Replace the two screws. Make sure the element is resting in the spacers that keep it the correct distance from the top of the oven. Flip the breaker to the ON position, Turn the oven on Broil. The element should start turning a bright red. some fumes will come off the element. That is just oil from processing and handling. Your done!
Was this helpful?
Thank you for voting!
Oven top Broiler was broke
2 of 2 people found this instruction helpful.
  • Alvin from CRYSTAL SPGS, MS
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers
I pulled the old broiler from holding clamps. I unscrewed the 2 screws holding the old broiler, pulled it out very slowly while using clips to hold the wires from going back into the wall behind the oven. That’s very important, I then pulled the old broiler off and replaced the new one. First I secured the elements on the oven clips that hold the element up, I reattach the new element, screwed the 2 screws back in. DONE My grandson helped, total time, maybe 15 minutes. Watch their video. Really easy, save money.
Was this helpful?
Thank you for voting!
broiler element broken -- rotted
2 of 3 people found this instruction helpful.
  • Robert from Alpine, NJ
  • Easy
  • 1- 2 hours
  • Nutdriver, Pliers
First I removed the two screws that hold the element in place. I then pulled the element out disconnected the two wires. THE PROBLEM IS THAT THERE IS HARDLY ANY WIRE TO WORK WITH. Otherwise I would have been finished in ten minutes.
Was this helpful?
Thank you for voting!
one of the burners was not working, the terminal block that the burner pluges into was burnt
2 of 3 people found this instruction helpful.
  • Robert from Woolwich Twp., NJ
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
I followed the instructions given to me in the package and all went well. I cut the old wires off the burnt terminal block, stripped the wires, installed the wire nuts with the shrink rap, installed the new terminal block and burner. The new burner is working great! Thanks
Was this helpful?
Thank you for voting!
Broil element
2 of 3 people found this instruction helpful.
  • Maria from Costa Mesa, CA
  • Easy
  • 15 - 30 mins
  • Socket set
switched off power to oven, unscrewed old broiling unit and installed new one.
Was this helpful?
Thank you for voting!
Melted plastic colander on a burner
2 of 3 people found this instruction helpful.
  • Paula from Dyersburg, TN
  • Really Easy
  • Less than 15 mins
I simply replaced the element. HOWEVER, the most wonderful parts of this repair...Because of the pictures and closeups and descriptions I knew exactly 'what' to order! And I had the replacement in less than 24 hours. I can do some home repairs but this company provided such detailed information AND speed of delivery...that this was a no-f uss fix. I'll definitely stop by to buy, again. Thanks!
Was this helpful?
Thank you for voting!
Old Burner Chrome Ruined
3 of 6 people found this instruction helpful.
  • RALPH from TROY, NY
  • Really Easy
  • Less than 15 mins
Replaced
Was this helpful?
Thank you for voting!
All Instructions for the JMS08BA2WH
31 - 45 of 165