- Home
- JMS08BA2WH
- Instructions
JMS08BA2WH General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The bake element in the upper oven broke
1 of 3 people
found this instruction helpful.
-
ron from reston, VA
- Really Easy
- 30 - 60 mins
I counldn't get the nut screw out. It wounldn't turn. Had to call a technican.
Was this helpful?
Thank you for voting!
metal ends for connecting surface element to stove broke off in the outlet.
0 of 1 people
found this instruction helpful.
-
Elaine from Framingham, MA
- Really Easy
- 15 - 30 mins
-
Pliers
disconnected electricity, used pinch pliers to remove broken ends from connection box and used an already existing element to make sure a new one would work at all. Ordered new one that arrived very quickly and replaced the broken one. After years of taking these in and out for cleaning by outside cleaning help they are bound to break off
... Read more
. I will do the gentle removal from now on.
Read less
Was this helpful?
Thank you for voting!
Burned out broil element
0 of 1 people
found this instruction helpful.
-
Beverly from Baton Rouge, LA
- Really Easy
- 15 - 30 mins
-
Socket set
.Received the part promptly. Installed it in about 30 minutes. With appliance servicemen, I figure I saved about $200.00 doing it myself. Thanks
Was this helpful?
Thank you for voting!
Plug-in surface element was covered with a melted on forever microwave plate
0 of 1 people
found this instruction helpful.
-
Lois from Sarver, PA
- Really Easy
- Less than 15 mins
Just put it right into the receptacle. I want to add...we had gone to our local appliance store and brought home a wrong-size unit. Got online and your website came up. It was easy to find the correct part, ordered it and it arrived 3 days later. I have already recommended your website to 2 of my friends. One very good experience!!!
Was this helpful?
Thank you for voting!
Burner not working.
0 of 1 people
found this instruction helpful.
-
Scott from Dallas, GA
- Really Easy
- Less than 15 mins
I pulled the old burner out and slid the new one in it's place. Turned on the eye to make sure it worked. Felt heat in a few seconds and turned off.
Was this helpful?
Thank you for voting!
I Ruined My Burner -- This Was A Solution For Me...
0 of 1 people
found this instruction helpful.
-
DEBRA from DULUTH, MN
- Really Easy
- Less than 15 mins
I simply pushed the new burner into hardware. I then tested it to see if it works. . .
Was this helpful?
Thank you for voting!
burned-out six inch electric stove- top burner
0 of 1 people
found this instruction helpful.
-
Harold from Gloversville, NY
- Really Easy
- Less than 15 mins
Removed the old and slipped in the new.No problem and it works fine.
Was this helpful?
Thank you for voting!
Electric stove 8" burner needed to be replaced
0 of 1 people
found this instruction helpful.
-
LISA from GLENDALE, CA
- Really Easy
- Less than 15 mins
Installation took 30 seconds. Your website was easy to use & the part received was just as described. It arrived beautifully wrapped & in just a few days. ABSOLUTELY AWESOME!I will recommend your site to everyone.
Was this helpful?
Thank you for voting!
Burner heating coil element would not get hot.
0 of 1 people
found this instruction helpful.
-
Jeannette from Haskell, NJ
- Really Easy
- Less than 15 mins
I pulled out the heating coil and pushed in the new coil. I turned the stove top on and heard a sound like "dzzzt". I immediately turned off the burner and waited for it to cool, then pulled it out. The part had a burn melt on one side of the end prong. It turns out that the part that the burner plugs into needs to be replaced. Actually,
... Read more
the stove top is over 20 years old and my landlord will have to replace the whole unit. So it turns out that I didn't need to order a surface element after all, but it was very easy to install!
Read less
Was this helpful?
Thank you for voting!
element broken at contact point
0 of 1 people
found this instruction helpful.
-
MARLENE from EUGENE, OR
- Really Easy
- Less than 15 mins
ordered new surface element and pushed in to conector turned on switch to test and works fine thanks
Was this helpful?
Thank you for voting!
Small burners would not work
0 of 1 people
found this instruction helpful.
-
David from Goodyear, AZ
- Really Easy
- Less than 15 mins
-
Screw drivers
ordered parts and disassembled old burners and installed new ones. All the parts were in the box when delivered.
Helping my 80 yr old mother-in-law very happy.
Got parts in for one of her 81st birthday present she was thrilled.
Helping my 80 yr old mother-in-law very happy.
Got parts in for one of her 81st birthday present she was thrilled.
Was this helpful?
Thank you for voting!
old burned caught on fire
0 of 1 people
found this instruction helpful.
-
Nilgun from Springfield, VA
- Really Easy
- Less than 15 mins
I've been looking for an 8" replacement burner for my GE stove after my original burner caught on fire over a year ago. I had all but given up on finding a replacement after searching at all the stores in my area and also searching on the net. After cooking sides for Thanksgiving dinner this year and the pain of cooking with only 1 large
... Read more
burner, I decided to search again for a burner on line and thank goodness I found this site! All I did was put in the model number of my range/stove and the site directed me to the replacement burner. The picture of the burner looked like mine, so I decided to purchase it but I still wasn't convinced it would fit and work because of my failed previous burner purchases. I really thought my burner was too old and the part was no longer made. Well the part shipped very quickly and lo and behold it fit and worked! Installing was a breeze...I just snapped it in...thanks so much!
Read less
Was this helpful?
Thank you for voting!
Needed new electric element
0 of 1 people
found this instruction helpful.
-
Barbara from Richmond, VA
- Really Easy
- Less than 15 mins
A breeze! Part was perfect replacement, snapped in place without tools, and heated almost immediately.
Was this helpful?
Thank you for voting!
A teapot melted on one of two working burners
0 of 1 people
found this instruction helpful.
-
Carolyn from Cincinnati, OH
- Really Easy
- Less than 15 mins
Pulled the old surface element out and plugged the new one in. Took all of 45 seconds!!!!!
It's nice to know that one can still get replacement parts for 50 year old stove tops!!!!
It's nice to know that one can still get replacement parts for 50 year old stove tops!!!!
Was this helpful?
Thank you for voting!
burned out surface element
0 of 1 people
found this instruction helpful.
-
Eugene from Crescent City, CA
- Really Easy
- Less than 15 mins
simply by inserting new replacement into electrical socket ...very satisfied in new replacement price and quick delivery date Thank you
Was this helpful?
Thank you for voting!