JMS0701 General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The heating element in the oven failed, after at least 16 years of good service.
1 person
found this instruction helpful.
-
Nancy from Golden, CO
- Really Easy
- Less than 15 mins
-
Nutdriver, Pliers, Screw drivers
First, we turned off power to the range. We removed the screws holding the element to the back wall of the oven and pulled out the element a few inches. We disconnected the 2 wires from the old element, and attached the new element with the 2 provided screws. We pushed the element back into the wall and secured it with the screws. Tur
... Read more
ned the power back on, turned the stove back on and, voila, the frozen pizza was well on its way to becoming dinner!
Read less
Was this helpful?
Thank you for voting!
element wont heat up
1 person
found this instruction helpful.
-
Mr Sal from Eastampton, NJ
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
4 screws 4 off then 4 on done
Was this helpful?
Thank you for voting!
No heat on bake.
1 person
found this instruction helpful.
-
Marian from Inglis, FL
- Really Easy
- Less than 15 mins
-
Nutdriver
The first thing I did wrong was order the wrong part. Then later I did find the Model number on the side of the bottom drawer. I reordered the right part and turned off the electrical breaker. Removed the old element. I then installed the element in the oven with 2 screw nuts and pulled out the stove, took off the back panel and slipped
... Read more
the wire nuts onto the element. Very simple. I am really thankful there is a place to order the part and it came the next day after I ordered it. WHOW!
Read less
Was this helpful?
Thank you for voting!
Took forever to preheat
1 person
found this instruction helpful.
-
Terri from Edgewater, FL
- Really Easy
- Less than 15 mins
-
Screw drivers, Socket set
When I told my husband I ordered the part and was going to fix it myself, he laughed and said I might not have ordered the right part for the problem and I should just buy a new stove.
The part was delivered the day before Christmas, just 3 days after I placed the order! I had read the stories of others fixing theirs and gave it ... Read more a shot. It took me longer to find the tools then it did to replace the element!
I took the screws out , pulled the element toward me and disconnected the wires. Put it back the way I found it. Oven heated up in less then 5 minutes!
The part was delivered the day before Christmas, just 3 days after I placed the order! I had read the stories of others fixing theirs and gave it ... Read more a shot. It took me longer to find the tools then it did to replace the element!
I took the screws out , pulled the element toward me and disconnected the wires. Put it back the way I found it. Oven heated up in less then 5 minutes!
Read less
Was this helpful?
Thank you for voting!
After being invited to my mom's house for supper, the oven lower baking element had shorted out and self destructed.
1 person
found this instruction helpful.
-
Arthur from Dallas, PA
- Really Easy
- Less than 15 mins
-
Nutdriver
After supper, without biscuits, I removed the element by simply removing 4 screws with my nut driver. We went home and I immediately went online to your web site, inserted the old element part number, followed the ordering instructions, and in 3 dayd the new element had been delivered to our door. Several days later we were invited to m
... Read more
om's for dinner once again. I quickly installed the new element (perfect fit and works great) and enjoyed a great supper........with biscuits this time. Thank you.
Read less
Was this helpful?
Thank you for voting!
element went out on oven
1 person
found this instruction helpful.
-
Brian from Deer Park, TX
- Really Easy
- Less than 15 mins
-
Nutdriver, Pliers
Made sure oven was turned off. I used nut driver to remove nuts holding old element to back of oven. gently pulled element out of wall, taking care not to yank because of wires attached to back of element. Made sure oven was off again and then used nut driver to carefully remove wire leads from receptors on element. removed old elemen
... Read more
t from oven and got the new element. carefully used nut driver to attach wire leads to new element. When snugging the bolts to leads, used pliers to keep leads on the element from bending. carefully replaced wires and rear of element into the space behind oven, and used nut driver to attach the back of element to the back of oven. shut oven and turned on to make sure it worked. it did. I was very pleased with my experience with part select dot com, and will be buying another element soon to replace the one in my other oven! Thank you
Read less
Was this helpful?
Thank you for voting!
oven wouldn't heat because coil had burned through
1 person
found this instruction helpful.
-
Carolyn from Harvard, MA
- Really Easy
- Less than 15 mins
-
Screw drivers
The part was delivered in 24 hours with regular
shipping and was simple to replace. Uncrewed
it, disconnected wires from the old one and connected
the new one. Cost a little more than $30 including shipping and the oven works great!
shipping and was simple to replace. Uncrewed
it, disconnected wires from the old one and connected
the new one. Cost a little more than $30 including shipping and the oven works great!
Was this helpful?
Thank you for voting!
Baking element went out
1 person
found this instruction helpful.
-
Shannon from Birmingham, AL
- Really Easy
- Less than 15 mins
-
Pliers
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. Removed the old piece and connected the wires to the new piece. I'm a woman and this took me less that 15 minutes to complete. Easy as pie. On top of that, I received my order within 3 days! Very
... Read more
impressive, PartSelect. Thanks.
Read less
Was this helpful?
Thank you for voting!
Burner would not heat
3 of 7 people
found this instruction helpful.
-
David from Madera, CA
- Really Easy
- 15 - 30 mins
-
Screw drivers
First I made sure the electricity was off. Then, I flipped the burner up, and loosened the screwon the hinge. This allowed the burner to extend onto the cook surface. After loosening the clips holding the ceramic insulator together, the wires to the element were exposed. The wires were then transferred to the new burner element from th
... Read more
eir corresponding position on the old one. The new ceramic insulator was affixed over the wire with clips, and the hinge reattached. The chrome ring was worked over the burner, and the burner reseated in its proper cook poistion. Testing confirmed the burner to now work as new.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Knob/switch would not turn right front burner on at all!
3 of 7 people
found this instruction helpful.
-
William from West Liberty, KY
- Easy
- 15 - 30 mins
-
Nutdriver, Pliers, Screw drivers
Pulled range out from the wall. Unplugged cord from outlet. Removed old knob, removed two phillips screws a very top of chrome trim, removed six nut-head screws from back to reveal the switches...removed two set screws from the front at knob base. Visually checked to make sure wiring post of new switch matched the old one. There was enoug
... Read more
h slack in the wiring to remove one wire at a time and connect it to the new switch in its appropriate place. Put new switch in the panel and secured with the two set screws. Select the bushing that would take up the slack for the old knob to fit on the new switch stem. Held new stem at its base with pliers and used another pair of pliers to snap the stem at appropriate length. (The new stem could not be broken off short enough to have the knob as flush to the panel as the other knobs...this was the only negative factor in the repair) Replaced nut-head screws and phillips screws. I was especially pleased with the quick delivery of the part...even without special shipping rates I received the part in less than 18 hours from the time I ordered it online!
Read less
Was this helpful?
Thank you for voting!
Bottom Element On The Top And Bottom Oven Burned Out
1 person
found this instruction helpful.
-
Tammy from McKinney, TX
- Really Easy
- 15 - 30 mins
-
Wrench set
Just like your example said/turn the power off to the oven/remove the screws that hold the element in place and then I pulled th element out a little ways and disconnected the wires/reconnecting took a little longer only because it was hard to see/but I connected the two wires and put the screws back in and it worked. Saved me a lot of m
... Read more
oney/my husband wanted to get a new double oven
Read less
Was this helpful?
Thank you for voting!
Bottom element had burnt out.
1 person
found this instruction helpful.
-
Robert from Harrisburg, PA
- Easy
- 15 - 30 mins
-
Screw drivers, Socket set
Unplugged stove, removed front door, carefully removed two screws holding the cover plate of the element. Gently pulled the element out about 3-4 inches removed the two screw attaching the electrical wires to the element , making sure the wires did not pull back into the stove. Removed old element, attached new element to the electrical
... Read more
wires with the new screws received with the new element. Carefully pushed the wires and element back into place making sure the insulation was also in place. Re-attached the cover plate with the two screws I had removed. Plugged the stove back in and tested the element. Replaced the front door .... job complete!
Just wanted to add that the part came in two days, super mailing time, thanks!!
Just wanted to add that the part came in two days, super mailing time, thanks!!
Read less
Was this helpful?
Thank you for voting!
The oven heating element was broken
1 person
found this instruction helpful.
-
Daniel from Denver, CO
- Really Easy
- 15 - 30 mins
-
Pliers
I removed the 2 screws and the 2 wires from the broken heating element. I removed the broken oven heating element. Then I attached the 2 wires to the new heating element and put the 2 screws in to attach the new heating element into the oven. The new oven heating element worked just fine and I was done.
Was this helpful?
Thank you for voting!
Oven lower Bake Element exploded
1 person
found this instruction helpful.
-
Fred from Renton, WA
- Really Easy
- 15 - 30 mins
-
Nutdriver, Socket set
First observed the situation to determine if I should try and repair. I decided I could and should. Got the element and proceeded. I first turned the power off at the circuit breaker to cut the electrical power to the stove then I removed the two screws that holds the unit in place and then pulled unit out to where I could see the wire co
... Read more
nnection; removed the two screws on the wire connection and replaced the old element with the new element. reinserted the unit back into position and replaced the two screws that holds the unit in the stove. Turned power back on and tested the oven for any problems. Stove is working great.
Read less
Was this helpful?
Thank you for voting!
Element burned out
1 person
found this instruction helpful.
-
Wendy from CHESHIRE, CT
- Really Easy
- 15 - 30 mins
-
Socket set
My husband first turned the main breaker off to the stove. Pulled the stove away from wall, took off the back plate, unhooked the element and out the new one in!!
Was this helpful?
Thank you for voting!