JHP75G201 General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The heating element in the oven failed, after at least 16 years of good service.
1 person
found this instruction helpful.
-
Nancy from Golden, CO
- Really Easy
- Less than 15 mins
-
Nutdriver, Pliers, Screw drivers
First, we turned off power to the range. We removed the screws holding the element to the back wall of the oven and pulled out the element a few inches. We disconnected the 2 wires from the old element, and attached the new element with the 2 provided screws. We pushed the element back into the wall and secured it with the screws. Tur
... Read more
ned the power back on, turned the stove back on and, voila, the frozen pizza was well on its way to becoming dinner!
Read less
Was this helpful?
Thank you for voting!
element wont heat up
1 person
found this instruction helpful.
-
Mr Sal from Eastampton, NJ
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
4 screws 4 off then 4 on done
Was this helpful?
Thank you for voting!
bake element burnt out
1 person
found this instruction helpful.
-
MIKE from CHATHAM, IL
- Really Easy
- Less than 15 mins
-
Nutdriver, Pliers, Screw drivers
super easy - unpluged stove - unscrewed old element w/nutdriver from back of stove. unwired element - discarded. wired new element (2 wires). secured new element to back of stove. pluged stove back in. works great. Ordered part on Sunday, recieved it on Tuesday- VERY NICE SERVICE
Was this helpful?
Thank you for voting!
elemant had burnt into
1 person
found this instruction helpful.
-
Tracy from Paris, IL
- Really Easy
- Less than 15 mins
-
Nutdriver
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, then i connect the new element and and replaced the screwes that held it in very simple and I must say Part select was very fast at getting me the correct part the first time , they have earned
... Read more
a spot in my Favorite list
Read less
Was this helpful?
Thank you for voting!
Heating Element Was No Longer Working.
1 person
found this instruction helpful.
-
Karen from Stuart, FL
- Really Easy
- Less than 15 mins
-
Screw drivers, Socket set
Removed oven door by holding sides and pulling upward. It's easy to remove and replace. Removed shelves by sliding back and up, then out. Removed two hex nuts with socket wrench. They are on back wall of oven and secure element to that wall. I then pulled element out about 3 inches and disconnected the two leads.
I put new ... Read more element in, reconnected two leads, replace two hex nuts and was done.
Turn off power to stove at circuit breaker before starting.
I put new ... Read more element in, reconnected two leads, replace two hex nuts and was done.
Turn off power to stove at circuit breaker before starting.
Read less
Was this helpful?
Thank you for voting!
element went out on oven
1 person
found this instruction helpful.
-
Brian from Deer Park, TX
- Really Easy
- Less than 15 mins
-
Nutdriver, Pliers
Made sure oven was turned off. I used nut driver to remove nuts holding old element to back of oven. gently pulled element out of wall, taking care not to yank because of wires attached to back of element. Made sure oven was off again and then used nut driver to carefully remove wire leads from receptors on element. removed old elemen
... Read more
t from oven and got the new element. carefully used nut driver to attach wire leads to new element. When snugging the bolts to leads, used pliers to keep leads on the element from bending. carefully replaced wires and rear of element into the space behind oven, and used nut driver to attach the back of element to the back of oven. shut oven and turned on to make sure it worked. it did. I was very pleased with my experience with part select dot com, and will be buying another element soon to replace the one in my other oven! Thank you
Read less
Was this helpful?
Thank you for voting!
No heat on bake.
1 person
found this instruction helpful.
-
Marian from Inglis, FL
- Really Easy
- Less than 15 mins
-
Nutdriver
The first thing I did wrong was order the wrong part. Then later I did find the Model number on the side of the bottom drawer. I reordered the right part and turned off the electrical breaker. Removed the old element. I then installed the element in the oven with 2 screw nuts and pulled out the stove, took off the back panel and slipped
... Read more
the wire nuts onto the element. Very simple. I am really thankful there is a place to order the part and it came the next day after I ordered it. WHOW!
Read less
Was this helpful?
Thank you for voting!
oven wouldn't heat because coil had burned through
1 person
found this instruction helpful.
-
Carolyn from Harvard, MA
- Really Easy
- Less than 15 mins
-
Screw drivers
The part was delivered in 24 hours with regular
shipping and was simple to replace. Uncrewed
it, disconnected wires from the old one and connected
the new one. Cost a little more than $30 including shipping and the oven works great!
shipping and was simple to replace. Uncrewed
it, disconnected wires from the old one and connected
the new one. Cost a little more than $30 including shipping and the oven works great!
Was this helpful?
Thank you for voting!
Baking element went out
1 person
found this instruction helpful.
-
Shannon from Birmingham, AL
- Really Easy
- Less than 15 mins
-
Pliers
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. Removed the old piece and connected the wires to the new piece. I'm a woman and this took me less that 15 minutes to complete. Easy as pie. On top of that, I received my order within 3 days! Very
... Read more
impressive, PartSelect. Thanks.
Read less
Was this helpful?
Thank you for voting!
Took forever to preheat
1 person
found this instruction helpful.
-
Terri from Edgewater, FL
- Really Easy
- Less than 15 mins
-
Screw drivers, Socket set
When I told my husband I ordered the part and was going to fix it myself, he laughed and said I might not have ordered the right part for the problem and I should just buy a new stove.
The part was delivered the day before Christmas, just 3 days after I placed the order! I had read the stories of others fixing theirs and gave it ... Read more a shot. It took me longer to find the tools then it did to replace the element!
I took the screws out , pulled the element toward me and disconnected the wires. Put it back the way I found it. Oven heated up in less then 5 minutes!
The part was delivered the day before Christmas, just 3 days after I placed the order! I had read the stories of others fixing theirs and gave it ... Read more a shot. It took me longer to find the tools then it did to replace the element!
I took the screws out , pulled the element toward me and disconnected the wires. Put it back the way I found it. Oven heated up in less then 5 minutes!
Read less
Was this helpful?
Thank you for voting!
After being invited to my mom's house for supper, the oven lower baking element had shorted out and self destructed.
1 person
found this instruction helpful.
-
Arthur from Dallas, PA
- Really Easy
- Less than 15 mins
-
Nutdriver
After supper, without biscuits, I removed the element by simply removing 4 screws with my nut driver. We went home and I immediately went online to your web site, inserted the old element part number, followed the ordering instructions, and in 3 dayd the new element had been delivered to our door. Several days later we were invited to m
... Read more
om's for dinner once again. I quickly installed the new element (perfect fit and works great) and enjoyed a great supper........with biscuits this time. Thank you.
Read less
Was this helpful?
Thank you for voting!
Really old range. Broken bake element in oven.
1 person
found this instruction helpful.
-
Kathleen from Grand Rapids, MI
- Very Easy
- Less than 15 mins
Turned off power. Removed old broken one installed new one in minutes. Turned power on and tested it out. If this 60 something lady can do it, you can too.
Was this helpful?
Thank you for voting!
Oven lower Bake Element exploded
1 person
found this instruction helpful.
-
Fred from Renton, WA
- Really Easy
- 15 - 30 mins
-
Nutdriver, Socket set
First observed the situation to determine if I should try and repair. I decided I could and should. Got the element and proceeded. I first turned the power off at the circuit breaker to cut the electrical power to the stove then I removed the two screws that holds the unit in place and then pulled unit out to where I could see the wire co
... Read more
nnection; removed the two screws on the wire connection and replaced the old element with the new element. reinserted the unit back into position and replaced the two screws that holds the unit in the stove. Turned power back on and tested the oven for any problems. Stove is working great.
Read less
Was this helpful?
Thank you for voting!
Bottom Bake Element had burnt into/split
1 person
found this instruction helpful.
-
Miranda from UNION GROVE, NC
- Really Easy
- Less than 15 mins
-
Socket set
Very easy and simple/ After making sure power supply was off, removed socket screws in back plate of element, slid old element out, attached new element and replaced/tightened socket screws on plate and new element. Power on, oven on .. heated quickly and nicely. Used oven several times since ... no problems.
Was this helpful?
Thank you for voting!
bottom drawer guides
1 person
found this instruction helpful.
-
Jim from TRAVERSE CITY, MI
- Very Easy
- Less than 15 mins
-
Pliers
Snapped in place (4)
Was this helpful?
Thank you for voting!