JHP75G201 General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
No heat from bake element
1 person
found this instruction helpful.
-
Roberta from Southampton, NJ
- Really Easy
- Less than 15 mins
-
Socket set
Ordered part, took old bake element out, installed new bake element. It was real easy.
Was this helpful?
Thank you for voting!
Bake element burned out
1 person
found this instruction helpful.
-
Lavona from JACKSONVILLE, FL
- Very Easy
- Less than 15 mins
-
Screw drivers, Socket set
Flip the circuit breaker going to oven off, then used a 1/4 inch socket on the mounting flange bolts and the bolt head screws attaching the wires. Then used a flat head screwdriver to reattach the wires with the supplied screws and bolted the new element in place. Back to the circuit breaker flipped the switch and turned the oven on to te
... Read more
st it, and now works fine. *be sure to remove the sticker before installation, use rubbing alcohol to remove any residue.*
Read less
Was this helpful?
Thank you for voting!
Bottom oven heating element was out
1 person
found this instruction helpful.
-
John from FALL RIVER, MA
- Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
Very easy repair. 2 hex head screws to take the heating element out. Then 2 more slot head screws for the wire connections. Perfect fit and operation of the new heating element.
Was this helpful?
Thank you for voting!
Oven heating element failed
1 person
found this instruction helpful.
-
megrew, from COLORADO SPGS, CO
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
Identify oven breaker and turn off power before starting. Opened oven door. Removed oven racks. Use 1/4" socket or nut driver to remove the 2 bolts holding heating element mounting bracket at rear base of oven. Carefully pull element out of installation mount to remove the 2 machine screws that attach electrical wires to the heating eleme
... Read more
nt. Reattach wires in same order as original element. Then reinstall new element in reverse order of removal. Took all of maybe 15 minutes! Excellent OEM Parts!
Read less
Was this helpful?
Thank you for voting!
Element burned out
1 person
found this instruction helpful.
-
Wendy from CHESHIRE, CT
- Really Easy
- 15 - 30 mins
-
Socket set
My husband first turned the main breaker off to the stove. Pulled the stove away from wall, took off the back plate, unhooked the element and out the new one in!!
Was this helpful?
Thank you for voting!
bake element no heat
1 person
found this instruction helpful.
-
larry from buckhannon, WV
- Really Easy
- 15 - 30 mins
-
Nutdriver, Pliers
took old element out , put new element in.very easy.
Was this helpful?
Thank you for voting!
Halogen element staying on
2 of 4 people
found this instruction helpful.
-
Arthur from Indian Harbour Beach, FL
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers
removed the end caps from the stove panel, unscrewed the back, unscrewed the old switch, CAREFULLY noting which wire went to which terminal, removed the wires.
Reversed the process. took a little longer because I felt compelled to do a thorough cleaning while I was there.
Reversed the process. took a little longer because I felt compelled to do a thorough cleaning while I was there.
Was this helpful?
Thank you for voting!
Old Reliable
1 person
found this instruction helpful.
-
Laura from Crofton, MD
- A Bit Difficult
- 15 - 30 mins
-
Wrench set
This range is about 30 years old and I was thrilled to still be able to get the bake element, which burned out about a month ago. I was doing research to buy a new stove when a cousin, from out of town, called to say they were going to visit the following week. No time now to get a new one installed. "partselect.com" was the fastest way.
... Read more
THANK YOU!
First off, I want you to know I'm an obese 56-year female without tools. But, I knew where to borrow those.
I first shut the power off to the range. I then disconnected the 2 screws that hold the element and pulled it out to reveal the 2 screws which connected the wires. I unscrewed those and removed the bake element. I double checked the stove model and bake element part # at the GE website and ordered it from "Partselect.com". It came in about 3 days. I then reversed the order of the above and it was done.
Here are some challenges I encountered..
1) The oven door was in the way making it uncomfortabe to get to the back of the stove.
2) Those $#%& screws are so short I kept dropping them.
3) The wires in the back bend easily. Be careful.
That's about it. It was a pill but not a real problem. It sure beat buying a new range before I've decided on which one to buy.
First off, I want you to know I'm an obese 56-year female without tools. But, I knew where to borrow those.
I first shut the power off to the range. I then disconnected the 2 screws that hold the element and pulled it out to reveal the 2 screws which connected the wires. I unscrewed those and removed the bake element. I double checked the stove model and bake element part # at the GE website and ordered it from "Partselect.com". It came in about 3 days. I then reversed the order of the above and it was done.
Here are some challenges I encountered..
1) The oven door was in the way making it uncomfortabe to get to the back of the stove.
2) Those $#%& screws are so short I kept dropping them.
3) The wires in the back bend easily. Be careful.
That's about it. It was a pill but not a real problem. It sure beat buying a new range before I've decided on which one to buy.
Read less
Was this helpful?
Thank you for voting!
bake element disintegrated
1 person
found this instruction helpful.
-
Susan from New Lebanon, NY
- Really Easy
- 15 - 30 mins
At 76 I no longer do my repairs so I asked my daughter's friend to do it for me.
Was this helpful?
Thank you for voting!
The small element blew out consequently shorting out the infinite switch.
3 of 7 people
found this instruction helpful.
-
Susan from Bend, OR
- Really Easy
- 15 - 30 mins
-
Screw drivers
The very first thing we did was turned the circuit breaker off and unplugged the range.
My husband removed the back panel and unplugged the switch. Drew a diaghram of the color coded wires. When we received the new one he broke the extension bar off to fit the knob, plugged it in and we were back in business. It was very easy for m ... Read more y husband as he is a mechanic (millwright). However, if you are mechanically inclined it is an easy fix.
My husband removed the back panel and unplugged the switch. Drew a diaghram of the color coded wires. When we received the new one he broke the extension bar off to fit the knob, plugged it in and we were back in business. It was very easy for m ... Read more y husband as he is a mechanic (millwright). However, if you are mechanically inclined it is an easy fix.
Read less
Was this helpful?
Thank you for voting!
Bake element burned out in oven
1 person
found this instruction helpful.
-
AL from GENOA, NE
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
First shut off power to the range in the electrical
breaker box (its the 220 breaker) as marked.
Remove the oven door ( open part way and lift up) the
door will come off.
Remove the 2 screws that the element is attached to the
back of the oven wall. Pull element out part way and
disconnect the 2 ... Read more wires. Take out element.
The new element had different connections so I cut off
the clips stripped the wires and attached to the element
connection . The element had connections that this was
possible. Push wires back into oven wall and install the
new element with the 2 screws that were removed. You
could also put on clips to the 2 wires that attach to the
element if so desired. (Eye hole clips.)
breaker box (its the 220 breaker) as marked.
Remove the oven door ( open part way and lift up) the
door will come off.
Remove the 2 screws that the element is attached to the
back of the oven wall. Pull element out part way and
disconnect the 2 ... Read more wires. Take out element.
The new element had different connections so I cut off
the clips stripped the wires and attached to the element
connection . The element had connections that this was
possible. Push wires back into oven wall and install the
new element with the 2 screws that were removed. You
could also put on clips to the 2 wires that attach to the
element if so desired. (Eye hole clips.)
Read less
Was this helpful?
Thank you for voting!
bake element burned out
1 person
found this instruction helpful.
-
Dave from Maryville, OH
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
took cover off back of stove. Removed two screws and wires that were attached to the element. Removed old element and installed new element. An easy repair.
Was this helpful?
Thank you for voting!
Bottom element in oven caught on fire and broke in two
1 person
found this instruction helpful.
-
SHERYL from VERO BEACH, FL
- Easy
- 15 - 30 mins
-
Nutdriver
The element was 25 years old and I was concerned about changing it. But is was so easy. I turned off power and removed 2 screws and then unscrewed the wiring from the old element. I had the new one installed in minutes. I was so glad to have my oven working again. Who needs a man.
Was this helpful?
Thank you for voting!
Knob/switch would not turn right front burner on at all!
3 of 7 people
found this instruction helpful.
-
William from West Liberty, KY
- Easy
- 15 - 30 mins
-
Nutdriver, Pliers, Screw drivers
Pulled range out from the wall. Unplugged cord from outlet. Removed old knob, removed two phillips screws a very top of chrome trim, removed six nut-head screws from back to reveal the switches...removed two set screws from the front at knob base. Visually checked to make sure wiring post of new switch matched the old one. There was enoug
... Read more
h slack in the wiring to remove one wire at a time and connect it to the new switch in its appropriate place. Put new switch in the panel and secured with the two set screws. Select the bushing that would take up the slack for the old knob to fit on the new switch stem. Held new stem at its base with pliers and used another pair of pliers to snap the stem at appropriate length. (The new stem could not be broken off short enough to have the knob as flush to the panel as the other knobs...this was the only negative factor in the repair) Replaced nut-head screws and phillips screws. I was especially pleased with the quick delivery of the part...even without special shipping rates I received the part in less than 18 hours from the time I ordered it online!
Read less
Was this helpful?
Thank you for voting!
Broken broiler element
1 of 2 people
found this instruction helpful.
-
Michael from Medford, NY
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Replacing the part was fairly simple. Do not forget to dis-connect the element from the back.
Was this helpful?
Thank you for voting!