- Home
- JCSP31WV2WW
- Instructions
JCSP31WV2WW General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Baking element burned through.
1 of 2 people
found this instruction helpful.
-
James from Seattle, WA
- Easy
- Less than 15 mins
-
Nutdriver
First I removed the two screws that hold the element in place, I then pulled the element out about three inches, and it shorted out on the main panel of the back of the range. I then went to the breaker box and flipped the switch so I could tell my wife "Yes, I had turned the power off."
Disconnecting the two wires and recon ... Read more necting them was a simple operation after I cleaned my pants from the electrical short.
Re attaching the two-screw panes to hold the element in place finished the project.
Disconnecting the two wires and recon ... Read more necting them was a simple operation after I cleaned my pants from the electrical short.
Re attaching the two-screw panes to hold the element in place finished the project.
Read less
Was this helpful?
Thank you for voting!
Oven wouldn't heat bottom
1 of 2 people
found this instruction helpful.
-
Thomas N from Blackfoot, ID
- Really Easy
- Less than 15 mins
-
Nutdriver
.First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires and reversed the procedure with the new element very simple.
Was this helpful?
Thank you for voting!
Large burner quit working
1 of 2 people
found this instruction helpful.
-
JoAnn from Fort Worth, TX
- Really Easy
- Less than 15 mins
I pulled out the old burner - put the new one in and I was done. No tools required.
The first burner I received from PartSelect was warped. I called on Friday morning to see about returning it and ordering a new one. The CSR was very helpful and I was totally surprised to have the replacement arrive the very next day since I di ... Read more dn't ask for a Saturday delivery. I will definitely use PartSelect again.
The first burner I received from PartSelect was warped. I called on Friday morning to see about returning it and ordering a new one. The CSR was very helpful and I was totally surprised to have the replacement arrive the very next day since I di ... Read more dn't ask for a Saturday delivery. I will definitely use PartSelect again.
Read less
Was this helpful?
Thank you for voting!
Burner Would Not Heat
1 of 2 people
found this instruction helpful.
-
Robert from La Crosse, WI
- Really Easy
- Less than 15 mins
Did it By Hand
Your Shipment Time Excellant
Order it Mon. Received it Wed.
Thank You
Your Shipment Time Excellant
Order it Mon. Received it Wed.
Thank You
Was this helpful?
Thank you for voting!
Bad sensor
1 of 2 people
found this instruction helpful.
-
John from CASPER, WY
- Easy
- 30 - 60 mins
-
Screw drivers, Socket set
By myself
Was this helpful?
Thank you for voting!
Just follow the enclosed instructions
1 of 2 people
found this instruction helpful.
-
HAROLD from Tucson, AZ
- Really Easy
- 30 - 60 mins
-
Nutdriver
Followed the instructions
Was this helpful?
Thank you for voting!
heating element shorting out-sparking
1 of 2 people
found this instruction helpful.
-
K from PERRYVILLE, MO
- Really Easy
- 15 - 30 mins
-
Nutdriver
I turned off electric to the stove. In the oven, I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. After unpacking the new element, I placed it in the bottom of the oven, reconnected the two wires, and gently fed the wires back into the back of the oven.
... Read more
I then secured the new unit to the oven wall with the two screws.
Read less
Was this helpful?
Thank you for voting!
Lower bake element burned out.
1 of 2 people
found this instruction helpful.
-
Elaine from Hanover, PA
- Easy
- 15 - 30 mins
-
Nutdriver, Pliers, Screw drivers
1. Turned off power at the breaker box. Removed oven door from oven, and removed bake racks. Determined replacement element from PartSelect was correct. Inspected new element. Using meter, determined new element was OK via continuity test. Gathered all appropriate tools to do the job.
2. Using 1/4" nut driver, removed two reta ... Read more ining screws at back of oven that secure element
3. Pulled bad element out a few inches from oven back to reveal wires and spade connectors
4. Using screwdriver, pushed off electrical connectors from bad element and removed element
5. Inspected wires and connectors and determined them to be OK
6. Installed new element in reverse of above. Inspected oven controls and determined them to be OK. Turned on the breaker. Tested oven.
7. Baked a delicious chocolate cake
2. Using 1/4" nut driver, removed two reta ... Read more ining screws at back of oven that secure element
3. Pulled bad element out a few inches from oven back to reveal wires and spade connectors
4. Using screwdriver, pushed off electrical connectors from bad element and removed element
5. Inspected wires and connectors and determined them to be OK
6. Installed new element in reverse of above. Inspected oven controls and determined them to be OK. Turned on the breaker. Tested oven.
7. Baked a delicious chocolate cake
Read less
Was this helpful?
Thank you for voting!
The oven heating element broke in two.
1 of 3 people
found this instruction helpful.
-
Anna from Texas City, TX
- Really Easy
- Less than 15 mins
-
Socket set
Rating: 5 Stars!! We cut the power, removed two screws disconnected the two wires (just pulled them out of the covers) from the old element and pushed in the new ones. It didn't take longer than 10 minutes!
This is the first time it's been as easy as promised! Great customer service in addition to easy and reasonable prices ... Read more !
Thank you,
This is the first time it's been as easy as promised! Great customer service in addition to easy and reasonable prices ... Read more !
Thank you,
Read less
Was this helpful?
Thank you for voting!
Lower bake element shorted out.
1 of 3 people
found this instruction helpful.
-
Val Ray from Idaho Falls, ID
- Really Easy
- Less than 15 mins
-
Nutdriver
1st, Turn off the stove at the electrical box. 2nd, Remove the oven door by opening it to the first stop, and then pulled it straight up. 3rd, Remove the 2 screws using a 1/4" nut driver. 4th Pull the old heating element straight out, until the two wires that attach to the element are out 3" from rear oven wall. (Note: Place a peace o
... Read more
f tape around each wire before disconnecting from the element. this will keep the wires from falling back through the holes). Remove the wires from the old element and remove the old element. 4th Place the new element into the oven, place the wires onto the new element. Then reverse the order of removal for new element install, for the repair. Less than 10 minutes.
Read less
Was this helpful?
Thank you for voting!
burned-out six inch electric stove- top burner
0 of 1 people
found this instruction helpful.
-
Harold from Gloversville, NY
- Really Easy
- Less than 15 mins
Removed the old and slipped in the new.No problem and it works fine.
Was this helpful?
Thank you for voting!
Oven would not heat
0 of 1 people
found this instruction helpful.
-
Sheryl from Pahrump, NV
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
I watched the video on the website then installed the part. In fact, I watched the video twice because I could not believe it was that easy. You can not do any better than PartSelect. Shipping is fast and the instructions are great. If I ever need a part for any appliance I will go to PartSelect.com first. Keep up the great work and thank
... Read more
-you so much!
Read less
Was this helpful?
Thank you for voting!
Old element shorted out after Thanksgiving (thankfully)
0 of 1 people
found this instruction helpful.
-
Mary from Matthews, NC
- Really Easy
- Less than 15 mins
-
Socket set
We were able to purchase the part and replace it for under $25. We took off the oven door and installed the new element in under 10 minutes.
Was this helpful?
Thank you for voting!
Plug-in surface element was covered with a melted on forever microwave plate
0 of 1 people
found this instruction helpful.
-
Lois from Sarver, PA
- Really Easy
- Less than 15 mins
Just put it right into the receptacle. I want to add...we had gone to our local appliance store and brought home a wrong-size unit. Got online and your website came up. It was easy to find the correct part, ordered it and it arrived 3 days later. I have already recommended your website to 2 of my friends. One very good experience!!!
Was this helpful?
Thank you for voting!
Burner heating coil element would not get hot.
0 of 1 people
found this instruction helpful.
-
Jeannette from Haskell, NJ
- Really Easy
- Less than 15 mins
I pulled out the heating coil and pushed in the new coil. I turned the stove top on and heard a sound like "dzzzt". I immediately turned off the burner and waited for it to cool, then pulled it out. The part had a burn melt on one side of the end prong. It turns out that the part that the burner plugs into needs to be replaced. Actually,
... Read more
the stove top is over 20 years old and my landlord will have to replace the whole unit. So it turns out that I didn't need to order a surface element after all, but it was very easy to install!
Read less
Was this helpful?
Thank you for voting!