- Home
- JCSP31BW2BB
- Instructions
JCSP31BW2BB General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Old Terminal Block was arcing.
1 person
found this instruction helpful.
-
Robert from HOUSTON, TX
- Really Easy
- 15 - 30 mins
-
Screw drivers
Cut Wires to old terminal block and wired in new Terminal Block
Was this helpful?
Thank you for voting!
Uns rewed and pulled out
1 person
found this instruction helpful.
-
Kathy from madison, WI
- Really Easy
- 15 - 30 mins
-
Wrench set
At first thought I was taking out some insulation but. "Clamp" just slid off and was very easy to install! Finding the right size socket took longer than the repair!
Was this helpful?
Thank you for voting!
RT END CAP THAT WAS BR0KEN
1 person
found this instruction helpful.
-
WILLIAM from ALLENTOWN, PA
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
REMOVED 5 PHILLIPS SCREWS
REMOVED BROKEN RT CAP
INSTALLED NEW END CAP
REINSTALLED THE SCREWS
PROJECT COMPLETE
REMOVED BROKEN RT CAP
INSTALLED NEW END CAP
REINSTALLED THE SCREWS
PROJECT COMPLETE
Was this helpful?
Thank you for voting!
element broke
1 person
found this instruction helpful.
-
Art from FRESNO, CA
- Very Easy
- 15 - 30 mins
-
Screw drivers
Fast shipping, Very easy to install I am a senior and had no problems works Great!!
Was this helpful?
Thank you for voting!
Bake element caught fire and melted
2 of 4 people
found this instruction helpful.
-
Fareed from Randolph, NJ
- Really Easy
- 15 - 30 mins
-
Nutdriver
Turn off power at the circuit breaker before working on electric thing.
Removed oven door and shelves for free access to element. Unscrewed the old element, pulled it out, removed the clips and removed the element. Reversed these steps to install the new element. Tested the element to ensure it worked.
Removed oven door and shelves for free access to element. Unscrewed the old element, pulled it out, removed the clips and removed the element. Reversed these steps to install the new element. Tested the element to ensure it worked.
Was this helpful?
Thank you for voting!
Current Part had MELTED from heat and broke off
1 person
found this instruction helpful.
-
Laurin from Longboat Key, FL
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Took door off of hinge
Removed 6 screws from bottom of door
Removed glass
Removed screws from side of door
Removed door from frame
Replaced the end caps using exisiting screws
Put door back together in reverse order
Pretty easy but simple instructions would have made it a 15 minute job instead of 30
Removed 6 screws from bottom of door
Removed glass
Removed screws from side of door
Removed door from frame
Replaced the end caps using exisiting screws
Put door back together in reverse order
Pretty easy but simple instructions would have made it a 15 minute job instead of 30
Was this helpful?
Thank you for voting!
oven heating element burned out
1 person
found this instruction helpful.
-
Howard from East Orleans, MA
- Easy
- 15 - 30 mins
-
Pliers, Socket set
First turned off the power to the stove at the breaker panel, thenI removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. Disconnecting/reconnecting the "clips" was the only difficult part because they did not slip off/on easily. Replaced the element in the ov
... Read more
en, replaced the screws...good to go!
Best part of buying from Parts Select was that they shipped the part the same day I ordered it, which was the Friday after Christmas. Competitor would not have shipped till the following Monday and we needed the oven ASAP!
Best part of buying from Parts Select was that they shipped the part the same day I ordered it, which was the Friday after Christmas. Competitor would not have shipped till the following Monday and we needed the oven ASAP!
Read less
Was this helpful?
Thank you for voting!
Oven would not get to temperature...200 degrees max
1 person
found this instruction helpful.
-
Jan from Rockport, ME
- Easy
- 15 - 30 mins
-
Screw drivers, Socket set
Pull out oven and unplug from 220 outlet. Remove rear upper/lower cover (4 screws), Remove two wires from rear of element. From front, open oven door, remove two screws and pull out old element.
Install new element by reversing above sequence. Then test and push oven back in place. Easy!
Install new element by reversing above sequence. Then test and push oven back in place. Easy!
Was this helpful?
Thank you for voting!
Lower oven heating unit burnt out
1 person
found this instruction helpful.
-
MARTIN from NAPERVILLE, IL
- Easy
- 15 - 30 mins
-
Nutdriver
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires,held wires one at a time so tehy wouln't slip back into rear holes in oven, slid off connector tabs and pushed on to replacement unit...)
Was this helpful?
Thank you for voting!
The old heating erlement basically melted and broke in two places
1 person
found this instruction helpful.
-
Coleen from Danville, IN
- Easy
- 15 - 30 mins
-
Screw drivers
I unscrewed the two screws inside the oven, then i pulled the oven away from the wall and unscrewed the protective shield, and undid the wiring. Then i removed the element. Once the new one arrived, i pretty much just did the same thing in reverse. vwa-lah... fixed!
Was this helpful?
Thank you for voting!
The bake element was burnt out.
1 person
found this instruction helpful.
-
Linda from Fort Collins, CO
- Really Easy
- 15 - 30 mins
-
Nutdriver
It took a nutdriver to remove two nuts. The defective element was removed and the replacement installed. It works great!
Was this helpful?
Thank you for voting!
Element burned out.
1 person
found this instruction helpful.
-
lynette from Bowling Green, KY
- Easy
- 15 - 30 mins
-
Pliers
Flipped off the circuit breaker first. Unscrewed the two screws holding the element in place. Pulled out about 4-5 inches. Tried several times to pull apart the connections, finally got 'em - don't give up (I must have weak fingers). Then plugged in the new element, shoved the wires back in, screwed it back in place, flipped circuit br
... Read more
eaker back on, turned the oven on.... made brownies (o:
Read less
Was this helpful?
Thank you for voting!
element broke
1 person
found this instruction helpful.
-
Richard from NEW BERLIN, NY
- Really Easy
- Less than 15 mins
-
Nutdriver
took 2 screws out that held element in, pulled old element out of oven wall, unhooked the wires. Hooked the wires to the new element, pushed it back into the oven wall, replaced the 2 screws.
Was this helpful?
Thank you for voting!
Burner worked intermittently
1 person
found this instruction helpful.
-
Mike from Rowlett, TX
- Really Easy
- Less than 15 mins
Lined up the prongs and slid it right in, took 30 seconds.
Was this helpful?
Thank you for voting!
bake element was fried
1 person
found this instruction helpful.
-
William from MARTIN, GA
- Very Easy
- Less than 15 mins
-
Nutdriver, Pliers
I went by the video
Was this helpful?
Thank you for voting!