EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JCSP31BW2BB General Electric Range - Instructions

All Instructions for the JCSP31BW2BB
46 - 60 of 405

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Alarm would sound whenever oven turned on - with an error message code
2 of 2 people found this instruction helpful.
  • Carolyn from MASON, MI
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Watched the video on the PartSelect site. Could not have been an easier repair and I saved the cost of a service call - probably saved at least $100 - $150 in service call and I can only guess what the labor cost would have been. Will use this business again for other appliance repairs on my older stove, washer, etc. By the way - the o fficial Kenmore site said this part was no longer made and unavailable --- Thank you PartSelect for having the part and saving me the cost of buying a new stove!
Was this helpful?
Thank you for voting!
the old screws were not correct so it took 1/2 hour for me to find screws that would. there should have been proper screws sent with the end cap.
2 of 2 people found this instruction helpful.
  • anthony from Jacksonville, FL
  • A Bit Difficult
  • 30 - 60 mins
  • Pliers, Screw drivers
I attached the end caps to my existing handle, but had to squeeze the parts together very hard to get them to mesh to the correct distance of the holes. I removed the screws holding outside frame of the oven door. I then opened the door fully, propping it up on my knee and removed the inside end cap screws. Placing the handle in positi on underneath the propped door, I attached the screws. Lastly I reassembled the door.
Was this helpful?
Thank you for voting!
melted electric range element
3 of 5 people found this instruction helpful.
  • Carole from Cleveland, OH
  • Really Easy
  • Less than 15 mins
Because of the superb pics and descriptions on the Part Select site, I was able (with NO range model number) to order the correct range element for beloved son's stove. He plugged it in in 3 seconds, works great !
Was this helpful?
Thank you for voting!
Handle broke
2 of 2 people found this instruction helpful.
  • Dean from Harrisonburg, VA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Took off the inside ( this allowed me to clean the glass) panel. Removed the two end parts with a screw driver. Replace the parts and we were good to go.
Was this helpful?
Thank you for voting!
old unit failing to heat all coils
2 of 2 people found this instruction helpful.
  • Emma from The VIllags, FL
  • Really Easy
  • Less than 15 mins
I first removed the unit by pulling gently from connection. Replaced the new one in that same manner - simply inserting into connection.

Very easy, I'll probably try it again soon.
Was this helpful?
Thank you for voting!
just needed new GE burner bowls
2 of 2 people found this instruction helpful.
  • Jacqueline from E WENATCHEE, WA
  • Very Easy
  • Less than 15 mins
Only instructions I have has nothing to do with installation. But I'd like to suggest that you find a better shipping method. Placed my order on Feb. 7, received message later same day that it'd shipped. I didn't receive it until Feb. 16th -- very poor delivery service.
Was this helpful?
Thank you for voting!
oven stopped heating and element appeared broken
2 of 3 people found this instruction helpful.
  • Henry J from South Haven, MI
  • Really Easy
  • 15 - 30 mins
  • Socket set
The customer service rep was brilliant in finding the
right part number! It was sent the following day
(with email to let me know) The part itself was just
exactly like the old one. I simply turned off the power,
removed the 2 metal screws and unplugged the
broken element. The new one fit properly and works ... Read more />like a million dollars. For about $50, you made me
look like a hero in my own house! Thjank you
Was this helpful?
Thank you for voting!
one of the burners was not working, the terminal block that the burner pluges into was burnt
2 of 3 people found this instruction helpful.
  • Robert from Woolwich Twp., NJ
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
I followed the instructions given to me in the package and all went well. I cut the old wires off the burnt terminal block, stripped the wires, installed the wire nuts with the shrink rap, installed the new terminal block and burner. The new burner is working great! Thanks
Was this helpful?
Thank you for voting!
Melted plastic colander on a burner
2 of 3 people found this instruction helpful.
  • Paula from Dyersburg, TN
  • Really Easy
  • Less than 15 mins
I simply replaced the element. HOWEVER, the most wonderful parts of this repair...Because of the pictures and closeups and descriptions I knew exactly 'what' to order! And I had the replacement in less than 24 hours. I can do some home repairs but this company provided such detailed information AND speed of delivery...that this was a no-f uss fix. I'll definitely stop by to buy, again. Thanks!
Was this helpful?
Thank you for voting!
Burner control was erratic. Sometimes it worked, sometimes it didn't.
2 of 3 people found this instruction helpful.
  • Charles from Clarksville, OH
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
First pull knob off switch. You may need a small screwdriver to gently start it. I then removed two screws, one in each end of control panel. Then rolled the panel up and out, as it is kind of hinged in the back. Removed two screws from switch front,layed it to the side and installed new switch. Removed wires (there were 5) one at a time with needle nose pliers, and placed on new switch. Replaced panel screws and was finished. Easy fix, quick delivery of part, I have used Partselect in the past and will continue.
Was this helpful?
Thank you for voting!
Oven door glass broke
2 of 3 people found this instruction helpful.
  • BEVERLY from PHENIX CITY, AL
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
First, I cleaned all the glass from the stove. then I inserted the replacement glass into the slots and screwed the bolts back into the stove. It took me about 1o minutes to do repair. It waS VERY EASY..
Was this helpful?
Thank you for voting!
children used it for a chin bar and broke the handle and the piece that holds the handle on
2 of 3 people found this instruction helpful.
  • Joyce from Houston, TX
  • Really Easy
  • Less than 15 mins
  • Screw drivers
We had to buy washers and screws to hold the handle on.
Then all we did was undo the screws that were on the side of the door. place handle on door screw the new screws and washers that we had to buy and replace the side screws and it was fixed.

The only problem that I found was that the handle kit did not come with scre ws or some kind of attachment to hold the handle on the door. We had to buy extras at the hardware store for that.
Was this helpful?
Thank you for voting!
bake element burnt into
2 of 3 people found this instruction helpful.
  • gary from assumption, IL
  • Easy
  • 15 - 30 mins
  • Nutdriver
repair went fine, real easy.
Was this helpful?
Thank you for voting!
Intermittent heat then no heat on oven element
2 of 3 people found this instruction helpful.
  • Bruce from AKRON, PA
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
With multimeter checked resistance of oven sensor. Specs called for 1100 ohms. It was off by 27 ohms. The sensor from Part Select had exact wire connection as original. Then just matter of undoing old and reconnecting with new one.

One unsatisfactory event. I asked Part Select why my clock did not work or light up(timer works ok) . Answer was: sorry we have no time to help you. That soured the otherwise happy experience.
Was this helpful?
Thank you for voting!
The phillament ends were pointed straight and the one I removed from the oven were bent in an angle .
1 person found this instruction helpful.
  • Michael from CLAY, NY
  • A Bit Difficult
  • 30 - 60 mins
  • Pliers
Bent the tips so the phillament can fit inside the oven.
Was this helpful?
Thank you for voting!
All Instructions for the JCSP31BW2BB
46 - 60 of 405