EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JCSP31BW2BB General Electric Range - Instructions

All Instructions for the JCSP31BW2BB
91 - 105 of 405

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
broken heating element
1 person found this instruction helpful.
  • Sherry from BLUFFTON, SC
  • Very Easy
  • Less than 15 mins
remove broken heating element and install the new one
Was this helpful?
Thank you for voting!
Oven would not heat
1 person found this instruction helpful.
  • Franz from CRESTVIEW, FL
  • Very Easy
  • Less than 15 mins
  • Nutdriver
Removed old broken element and installed new one. Took less than 10 minutes
Was this helpful?
Thank you for voting!
Old burner bowl needed to be replaced
2 of 4 people found this instruction helpful.
  • bonnie from N KINGSTOWN, RI
  • Very Easy
  • Less than 15 mins
Took out the old & put in the new one-Done!
Was this helpful?
Thank you for voting!
a plug on the element broke off while cleaning and replacing
1 person found this instruction helpful.
  • David from WEST WARWICK, RI
  • Very Easy
  • Less than 15 mins
Absolutely no tools required for this task. Simply align the prongs to the female portion on the stove top. Carefully push in until the element is in place then line up with the drip pan slot. No instructions are necessary!!
Was this helpful?
Thank you for voting!
My heatng element blew up
2 of 4 people found this instruction helpful.
  • Ruth from Charlotte, NC
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Wrench (Adjustable)
I followed the way all the others on this website did the repair. It was so easy. I turned the power off to the oven, then disconnected it from the back oven wall, pulled it out a bit, disconnected the wires, and put it back in.

Then we put the power back on and stood back and turned on the stove and IT WORKED!!! Yeah, and for so little money... I tell you I shopped other websites and this one was priced GREAT, and just reading the stories how others had done this repair gave me the confidence to do it too. Now, I think I have a burner that I will replace and who knows what else I can find to do.

THANKS SO MUCH!!!
Was this helpful?
Thank you for voting!
The bottom bake element was burned out.
1 person found this instruction helpful.
  • Richard from State College, PA
  • Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
1. Turned off electrical breaker for range.
2. Removed the two hex head screws that hold element in place.
3. Pulled element out and unplugged the two electrical connectors.
4. Attached connectors to new element and attemped to push element back into the opening. It would not go in all the way.
5. Apparently some of t he insulation had fallen down and was blocking the area where the element slides in.
6. I used a long thin screwdriver inserted into the two holes to push the insulation aside.
7. The element was then able to go in all the way.
8. Replaced two hex head screws.
9. Turned on range breaker.
10. Turned on oven. Works fine.
Was this helpful?
Thank you for voting!
bake element broke
1 person found this instruction helpful.
  • edward from west sayville, NY
  • Really Easy
  • Less than 15 mins
  • Nutdriver
first i removed the two screws that hold the element in place. then pulled the element out about 3 inches and disconnected the two wires .then i connected the two wires and pushed thebake element back and replaced the two screws.then i put the circuit braker back on and tested the stove and it worked great. very easy to do.
Was this helpful?
Thank you for voting!
burnt element
1 person found this instruction helpful.
  • Brian from Iron River, MI
  • Really Easy
  • Less than 15 mins
  • Nutdriver
.g. First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires...)
Was this helpful?
Thank you for voting!
Old element burned in half
1 person found this instruction helpful.
  • Christine from Covington, LA
  • Really Easy
  • Less than 15 mins
  • Socket set
I turned off the power going to the stove, unscrewed the 2 screws, plugged in the 2 inserts, put the 2 screws back and PRESTO!!!!
Was this helpful?
Thank you for voting!
Bake Element went out..flamed out pretty big light show when it happened
1 person found this instruction helpful.
  • Don from Martin, TN
  • Easy
  • Less than 15 mins
  • Socket set
The job went over without a hitch, only probably didn't get the correct part first go around, but after getting the right part everything went very easy..Just a couple of screws where the elment goes in and 2 wires to plug back into the new element, after that everything was good to go!!
Was this helpful?
Thank you for voting!
Bake element sparked due to damage
1 person found this instruction helpful.
  • Robert from Bethlehem, NH
  • Really Easy
  • Less than 15 mins
  • Socket set
Shut of circuit breaker. Removed two screws with socket set . pulled element out about three inches, disconnected and held wires in place with clip type closepins. pressed connections onto new element , secured screws and presto... All too simple and in less then 15 minutes.
Reading previous reviews was quite helpful
Was this helpful?
Thank you for voting!
element broke, oven wouldn't heat - still doesn't
1 person found this instruction helpful.
  • TESS from BOSWELL, PA
  • Easy
  • Less than 15 mins
  • Socket set
first husband removed the bolts unplugged old element wires -plugged in new element wires and but in bolts - unfortunately the oven still doesn't work not sure if element is bad or wiring, need professional help
Was this helpful?
Thank you for voting!
Heating element was not working in an old (50+ years old)GE electric oven
1 person found this instruction helpful.
  • Michele from Dayton, NJ
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Replacement of the heating element only takes a few minutes...First, turn off the breaker/fuse to the stove, then just remove two screws , pull out the two connected wires to expose the connections, hook them up, and replace the screws to the cover plate. The connection/cover plate can be hinged or not hinged. Make sure you order the co rrect one. We ordered the wrong one at first, but were assisted by the returns dept. and received the correct one in 2 days. Great customer service, thanks partsselect.com!!
Was this helpful?
Thank you for voting!
Tenant broke bake element
1 person found this instruction helpful.
  • John from Muncie, IN
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Removed the two screws, pulled out old element, installed new element, and reinstalled screws.
Was this helpful?
Thank you for voting!
Large burner quit working
1 of 2 people found this instruction helpful.
  • JoAnn from Fort Worth, TX
  • Really Easy
  • Less than 15 mins
I pulled out the old burner - put the new one in and I was done. No tools required.

The first burner I received from PartSelect was warped. I called on Friday morning to see about returning it and ordering a new one. The CSR was very helpful and I was totally surprised to have the replacement arrive the very next day since I di dn't ask for a Saturday delivery. I will definitely use PartSelect again.
Was this helpful?
Thank you for voting!
All Instructions for the JCSP31BW2BB
91 - 105 of 405